Try unplugging it for a minute. You will have to go through setup again (most likely).
Some of these sets have a (software?) issue and the audio drops out maybe once or twice a year-at least that's what I've experienced. No real fix for it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The problem is in the vertical deflection circuits which is responsible for giving a full picture. Since the set is 8 years old the money would be better spent on a new tv since more frequent break downs in other parts of the set would be more likely due to age.
It must be connected with the color circuit of your tv, a board connected to back end of the tube. Could be dust, cob web or carbon deposit shorting a transistor. Popping noise if loud enough can be attributed to high voltage circuit fault and picture tube.
6/1/2010 11:34:21 AM Good morning I have sound problem it started with the cable hook up there box to the television, now sound is very low. Turn up the TV control to max, nothing but low sound. Of course cable people have no idea of a problem, I disconnected the cable but the same problem, love the set work for two years, note: thing happen when all analog change to digital. help!
It worked fine yesterday. Sound on all channels. Sometimes the picture goes black on channel 6. We can get it back by going up one channel, then back to 6.
it is due to cable signal ie weak.
now there is no sound
this is due to sound section
1 loose connect in sound section
3 problem in sound section some part must have failed.