Question about Blomberg Refrigerators
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I have a refrigarador model
if its an electronic control model fridge and its flashing 4 in the freezer side then its detected a fault in the freezer side you need to call for service or contact the store you bought it from
Posted on Jan 15, 2008
SOURCE: Product manual
http://world.casio.com/wat/download/en/manual/ and give ther number which is given behind ther Watch surly you will get the manual
Posted on Feb 25, 2008
SOURCE: GE Icemaker PFSS6PKXASS
To reset the filter light you need to hold the button in for 3-5 seconds , the light will usually flash while you hold the button down then it will go solid and then go out once you release the button. The ice maker will only make ice when the freezer is cold enough approx -14c . Did it make ice ok before ? There is the possibility that when changing the water filter air got into the system and has not bleed out of the ice maker feed tube yet.
The Ice maker can usually be put into a test mode by turning it off , wait 30 secs then turn it back on and press the ice level sensing paddle back three times within 15 secs of switching the ice maker back on . The ice maker should then go through a forced harvest cycle and ask for water at the end of it.
Hope this helps
Posted on Sep 02, 2008
I experienced the same bulb housing melting/potential fire problem with my Kenmore Elite Trio refrigerator ( Model #79577549600) that I purchased in April of 2006. The first time it happened was in July 2008. I smelled burning plastic when I opened the fridge and noticed the bulb housing was extremely hot. The only way I was able to unscrew the bulbs was to unplug the fridge for a while until the bulbs cooled down. Unbeknownst to me, by unplugging the fridge, I reset some CPU board (or something) and the problem corrected itself. However, the lighbulb sockets were blackened and the plastic housing started to melt, so that was damaged. Because the problem corrected itself, I second guessed myself, thinking that perhaps I left the door open and the Alarm was off (even though it was on, but I dumbfounded). Then this past Sunday, 9-21-08, it happened again. This time, even worse. The plastic housing is completely destroyed because of the melting, the lightbulb shattered and the sockets are burnt. Thank goodness I decided to check about similar complaints before calling Sears. I can't believe all the incidents of this extremely dangerous hazard. Of course, the Sears 1-800 number offered no assistance since I didn't purchase an extended warranty. They recommended calling Kenmore. They were even worse. Finally, after reporting it to the Consumer Product Safety Commission, I decided to call the salesman directly who I purchased it from. He stated he never heard of that problem. However, he told me to call One Source at 1-800-479-5899 to see if they could help me with my "product failure". He warned me that they might not be quick to help, but to be persistent. I was all ready for a fight when Jim answered the One Source phone. When I told him my problem, he immediately stated he knew about the problem and he'd get a tech out as soon as possible to replace the necessary parts. He stated that this problem was "rampant", but that they were correcting it at no charge to the customers. I now have a tech coming on 10/2 (the earliest opening) and a case number. I would recommend still reporting this problem to CPSC, but then try One Source.
Posted on Sep 23, 2008
Try these easy steps:-
Posted on Nov 25, 2008
Tips for a great answer:
Aug 20, 2011 | Computers & Internet
Mar 05, 2011 | Sony DCR-TRV285E Digital-8 Digital...
Dec 07, 2010 | Philips Food Processors
Jun 02, 2007 | Mercury Electronics CyberPix S-550V...
Mar 27, 2017 | Blomberg Refrigerators
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: