Question about Toshiba E-Studio 161 Copier
Toshiba e-studio16 drivers are available Toshiba Official Support
Click 'Support & Drivers'
Choose B/W Copiers
Select the drivers for your operating system and download
Appreciate generously, if the solution could have been of any help!
Posted on Mar 14, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 25, 2014 | Toshiba e-Studio 161 Copier Copier
Jul 22, 2014 | Toshiba e-Studio 161 Copier Copier
L3 occurs due to scanner trouble.
Mirror unit abnormality
Scanner wire disconnection
Origin detection sensor abnormality
Mirror motor harness abnormality
Use SIM 1-1 to check the mirror reciprocating
When the mirror does not return.
Check for disconnection of the scanner wire.
Check the harness and the connector between
the mirror motor and the MCU PWB.
When the mirror does feed.
Use SIM 1-2 to check the mirror home position
To enter SIMULATION MODE press C, 0, reset key, C (press these four buttons as soon as posible. The display will go off then enter the SIM codes and press START)
Dec 05, 2012 | Toshiba e-Studio 161 Copier Copier
Jul 12, 2012 | Toshiba E-Studio 161 Copier
Jun 28, 2011 | Toshiba e-Studio 161 Copier Copier
Mar 08, 2011 | Toshiba E-Studio 161 Copier
Aug 23, 2010 | Toshiba e-Studio 161 Copier Copier
Aug 07, 2010 | Toshiba e-Studio 161 Copier Copier
Jun 04, 2010 | Toshiba e-Studio 161 Copier Copier
Jan 16, 2010 | Toshiba e-Studio 161 Copier Copier
988 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: