Question about Car Audio & Video

1 Answer

I have an urban audio works 7 band equalizer. i have a spx pro audio amplifier and an alpine cd reciever model cde987. the equalizer is not installed. could your please tell me where to wire in the blue, green, purple, brown, yellow and grey wires. white is auxilary, red is imput. the six wired listed are high imput. the model is tu960981656 urban audio works 7 band equalizer amplifier. freq response :20-20,000hz . power output: 100w (50w+50w) maaxumum . speaker impedance : 4 or 8 ohms. 50w + 50w peak. only for 13.8 volt negative ground.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

INPUT: Yellow (left front), violet (left neg), green (left rear), Blue (right rear), Brown (right neg), Gray (right front)
OUTPUT: Front Left pos (green/red) neg (green), Front Right pos (gray/red) neg (gray), Left Rear neg (brown) pos (brown/red), Right Rear neg (white) pos (white/red)
dfsanchez@yahoo.com

Posted on Apr 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring details for alpine3215


Wiring connection diagram. For Alpine 3215 7-band graphic equalizer with 4-amps. have custom scanned this item for those folks that don't have a need for the full service manual and just need a simple connection diagram. Includes wiring connection diagram and pin-outs of the din as well as output block connectors.

Sep 28, 2016 | Car Audio & Video

1 Answer

Need wiring diagram for alpine graphics equalizer


Hi there

Use the 'Google' search engine and type in support.alpine-usa.com/products. You will be able to download a pdf manual on your model.

Apr 13, 2014 | 1993 Ford Probe

1 Answer

Where do i get a spare tweeter from


Just ask alpine. They will definatly give you one. Also try crutchfeild. When I need car audio replacement parts, I usually go there

Oct 11, 2009 | Alpine SPX-17 PRO Car Component System

1 Answer

How to install by myself


From your car stereo's audio out, connect this to your Equalizer's audio in, then from your Equalizer's out (sub connect it to your sub's amplifier audio in, mid out to your mid amplifier's audio in).

Sep 27, 2009 | AudioControl EQL 13-Band Car Equalizer

3 Answers

How to hook up equalizer to the amplifier


always remember source, amp, then speakers. ex: cd to eq to amp to speakers and it goes: out from cd player into eq, out from eq into amp, out from amp into speakers . hope this makes it easier for you.

Jun 23, 2009 | Sony TC WE435 Stereo Dual Cassette Deck...

3 Answers

Cannot Set the Treble & Bass


I have an Alpine 9887 you have a different eq than just trebel and bass the only way to get you bass an trebel setings are to install the imprint stoftware now if thats the route you go it tunes your radio to what it thinks it should sound like it's for sound quality not for alot of bass been there done that I have the software but you need to take it to a good alpine dealer to have it installed good luck

Jan 05, 2008 | Alpine CDA-9887 CD Player

1 Answer

Pro-97 scanner recieving problem


try going to a urban area and scanning the NOAA band. if that works your programming is wrong and there is nothing wrong with your AM/FM base band. also the BNC antenna connector on the inside is notorious for breaking away from the board, nothing a little solder cant handle. Also make sure your local freq's are not Digital

Dec 05, 2007 | Radio Shack Pro-97 Handheld Scanner

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4844 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...