How can I connect front panel audio cablles to the Motherboard slot? I cant understand the code mentioned on motherboard. please advice

press run and type in volume control options and there it is

Inside your computer, look for the cables that are attached to the front panel audio and front panel usb, on the end of both cables you will see a rectangle plug, on your motherboard you will see ports that are designed exactly for the two plugs I have mentioned, at this point you plug them into the relevant ports. It is worth noting that these plugs are slightly different from eachother, thereby preventing you from plugging them in to the incorrect sockets.

If you have any more questions, please do not hesitate in asking,

Chris

Good day

you can find the sulotion in your motherboard manual.. what kind of speaker slot?
the speaker for mother board is 2pin
1st find the reset/led/on pin
2nd you can see the speaker slot..

check wiring to the front panel it sounds like it is not plugged into the right jack on the motherboard.

The front audio panel will only work if connected to motherboard. Try
connecting to the audio panel in the back of the computer (directly
to the motherboard). If the rear panel audio plug (green) doesn't work
then the audio drivers that came with the motherboard might need to
be installed. Check your audio driver status with operating system.

LOOK AT YOUR MOTHERBOARD .THERE WILL BE A CHART . CAREFULLY EXAMINE IT.IT WILL BE LIKE THAT


        fRONT PANEL CONFIGURATION
  _______________________________
  |               |              |            |          |                   
  |               | 3           | 5         |    7     |
  |   1          |              |            |          |
  |_______  |________|_______|______|
  |              |            |            |             |
  | 2           | 4          | 6         | 8          |
  |_______|________|______ |_______|


u see the the numbers in the table these will be the configuration for the setting.different motherboards have different . i hope this will help .

Front pannel audio is located left of the pci slots 
: : : . : : :   thats what it looks like         from left to right there are seven sets of pins 1234567. 
3 and 7 should be the pins you want for a standard front panel audio as far as i see in the manual ICEBOX  



















 

Hello there.
I understand that you need to connect the front audio panel to the motherboard.

The user manual which came with your Computer will have the steps and illustrations to connect the front audio panel to the motherboard. If you have the manual that came with your Computer please refer to that.

If you could not find the manual you can download that from ASUS website. The below link will direct you to the download manual page.

Click here to download

or

Copy-paste the below link in the address bar of a web browser.

http://support.asus.com/download/download_item.aspx?product=1&model=P5P800-MX

Thank you

Good bye and Take care

Raviteja

most of the old motherboards dont support the audio and mic port to work both in back side(back panel header) and front side (front panel header)simultaneously...

most of the old motherboards dont support multi streaming so you cant make both the back panel header and front panel header to work at a time ie i mean you cant connect both panel header at a time ...

you can just refer to your motherboard manual for the detailed information about it ..

in your motherboard if there is any option to connect the front panel header to the motherboard other than the back panel header you can connect it to that the detailed pin information will be given in the motherboard manual ..

if you dont have the option in the motherboard to connect the front panel header seperately then you must remove the pins connected from the back panel header and you must insert the front panel header pins .
this will disable your back panel audio ,mic,linein functionalities but you will be able to connect in front panel header , this front panel header will work ..

if the motherboard is not compatible then the system assembler will leave the front panel wires not connecting to motherboard ..

like this only one panel can work at a time ,
but in the latest motherboards the multi streaming technology has been introduced so both the panels can work at a time and can play different audio on 2 different panels ...

thank you
bye
any doubts you can reply me
i am always here to assist you
please rate my solution
have a nice day

http://www.intel.com/products/i/motherbd/D946GZIS/D946GZIS_lg.jpg

connect the front panel audio to the yellow coloured header you can see near the white coloured PCI Slot. in the above picture it is shown in the top right hand corner.