Question about Microsoft LifeCam VX-1000 Webcam

1 Answer

Software disc when i insert the disc nothing happens so i cant use the web cam

Posted by on

1 Answer

Click On My Computer/Computer
Then Double Click On The Disc Icon!
It Should Autoplay Then!

Posted on Aug 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My webcam won't let me take pictures .. What do i do so i can take them ?


In order to use your web cam and take pictures follow these steps :

- Check if your web cam is working or not ( when you turn on the web cam do you get the power light on or not)

- If the web cam is working fine if it is not then you can check the cables, unplug it and replug it if you are using an external cam on a desktop computer.

- Uninstall the web cam software from add and remove programs from control panel.

- reinstall the web cam software / utility.
you can do this using the disc which you have got when you bought the web cam.

If you don't have the disc you can go to the manufacturers web page and you can download the software and driver from there.
Must ensure that you select the correct serial number of your web cam when you do this.

Nov 28, 2010 | Jwin JCAM100 Webcam

1 Answer

Install web cam


Insert firstly the disc that comes with your web cam and then it will prompt u to plug in your web cam and then u should be up and running fine

Nov 10, 2009 | Webcams

2 Answers

The install shield doesn't finish working


Try copying the files on the disc to a folder and run them from there. Open the folder you saved the files in then double click the setup.exe icon and see if it completes the installation. If that does not work then try downloading the files from the radio shack web site.

Sep 08, 2009 | Radio Shack VGA PC Camera Webcam

1 Answer

Soft ware disc i have lost it


hey ! Listen..if you are having vista as your operating system then, you don't need to have the cd for your web cam, Vista will detect for itself..And if you are having XP or any other operating ..If u know the model no of your web cam.I think you will be able to get de software from net ! ^_^

May 04, 2009 | Intel CS630 Webcam

1 Answer

Lost my disc of creative web cam


I have creative web cam. I have lost the CD required for installation of the software. The model noHG676442 CS 100 132044392468
R.Sundrarajan

Aug 08, 2008 | Creative Labs WebCam Live!

3 Answers

The install disc will not complete


You can go to the website to download the install disc here is the link and the instructions. If that doesn't work I would assume the cam is not compatible with vista.
http://www.manhattan-support.com/driver-multimedia.shtml#460064
  1. Make sure that the USB web camera is physically disconnected from your computer.
  2. Insert Driver CD into cd-rom drive and allow autorun menu to appear.
  3. Proceed with installation by explicitly following steps 1 through 3 of the autorun installation menu, restarting where necessary.
  4. Connect the USB Web Camera to your PC.
  5. Allow time for Camera drivers to be detected and installed. Ignore all Windows logo certification (or similar) messages and proceed with installation.
    Click on Windows Start Menu and execute the Pharoah Eye software application.
Note: make sure it is unplugged before you begin installation.
Good luck,
Lee

Jun 12, 2008 | IC Intracom Manhattan FUN! CAM Webcam

1 Answer

Help i cant get my web cam to work without a disc


Here is a link where you can find the driver, firmware, and application for your webcam, just select your webcam from the list, your operating system on the next page, click next and download your software.

http://us.creative.com/support/downloads/

Apr 29, 2008 | Creative Labs WebCam Live!

1 Answer

How to download software?


Here is the link to the website with the install discs of all manhattan cams I have also copied the instructions for your benefit.
http://www.manhattan-support.com/driver-multimedia-cams.shtml
  1. Make sure that the USB web camera is physically disconnected from your computer.
  2. Insert Driver CD into cd-rom drive and allow autorun menu to appear.
  3. Proceed with installation by explicitly following steps 1 through 3 of the autorun installation menu, restarting where necessary.
  4. Connect the USB Web Camera to your PC.
  5. Allow time for Camera drivers to be detected and installed. Ignore all Windows logo certification (or similar) messages and proceed with installation.
    Click on Windows Start Menu and execute the Pharoah Eye software application.
note: make sure the camera is unplugged before installing.
That should do it good luck,
Lee

Dec 30, 2007 | IC Intracom Manhattan FUN! CAM Webcam

1 Answer

Cannot install software


try to uninstall the software of the cam you have install. After finish unistalling unplug you cam then restart your pc. after restarting try to plug wait until the camera detected then it will they the driver of the camera then insert the CD driver package of the camera. then follow the instructions that appear when installing driver. If you have downloaded the driver try to browse the file and follow the instruction. After installing the driver restart your pc.

Oct 27, 2007 | Microsoft LifeCam VX-3000 Web Camera

Not finding what you are looking for?
Microsoft LifeCam VX-1000 Webcam Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Webcams Experts

David Payne
David Payne

Level 3 Expert

13437 Answers

Brian Friend

Level 2 Expert

132 Answers

johncassells

Level 1 Expert

10 Answers

Are you a Microsoft Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...