Question about Garden

1 Answer

I have a jet 1/2 air impact wrench model number aw500hd product 400239 i need a rebuild kit for it and would like to have a picture where all the parts fit together. thank you kindly

Posted by on

  • DENNIS Mar 14, 2011

    HI KELLY



    Y ou sent me some information on A DRILL HAMMER i dont have a drill hammer. I have a jet 1/2 inch air impact wrench( gun) model number aw500hd product number 400239. I have sent a link so you can see the type i have its---www.compresseursadec.com/produits/pdf/impact.pdf this link is in french and i dont speak french -- i need to find a rebuilt kit for it and need hopefully a manual so i can see how it goes back together and if any parts are missing. Thanks kindly

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,740 Answers

Hi and welcome to FixYa, I am Kelly.
The manual for the AW500HD can be found here:
http://www.axminster.co.uk/downloads//manual_340381.pdf

Contact data:
http://www.axminster.co.uk/page/contact/?src=froogle
Use the feedback form on the bottom of the page or call
0800371822 (option 3)
email: technical@axminster.co.uk and
Post:
Axminster Devon EX13 5HU UK

01297 33656

(International Dialling +44 1297 33656)
http://www.axminster.co.uk

The parts break down is on page 8 but does NOT list a single part number. Only Nomenclatures. You are going to have make that dreaded phone call or lengthy email for support.

Thank for choosing FixYa,
Kelly

Posted on Mar 14, 2011

  • Kelly
    Kelly Mar 14, 2011

    Hi again,

    I used your model number to come up with my original link. I was a bit perplexed that you were talking about an impact wrench and I could only find a hammer drill. I again crossed the model number and came up with the same information. Who is the manufacturer of this impact many I can find a kit using just the manufacturer. I know that your impact has 320 Ft Lbs of torque and that it says it is a model AW500HD (400239) code. I again crossed that information moments ago and came up with

    JETTM 1/2" Impact Wrench

    No. Cat. Description

    400239 AW500HD • 320 ft./lbs. torque

    • 7,000 RPM

    • 7 3/8 " O.A. length

    • 5 lbs.

    • 3.5 CFM

    • 3/8" airhose

    • 1/4" NPT air inlet



    This is as close as I can get:

    http://content.wmhtoolgroup.com/manuals/...

    All of the handle parts will be the same aa your model. The problem I am having is finding an exact match and there is not a KIT in this manual.

    I checked Chicago Pneumatic and Ingersoll Rand with no luck.



    You can try contacting Jet here:

    https://parts.maam.waltermeier.com/Conta...



    I have been trying for over 2 hours to solve the mystery here with little success. I am sure by now you are as frustrated as I am.



    Kelly




    JETTM 1/2" Impact Wrench

    No. Cat. Description

    400239 AW500HD • 320 ft./lbs. torque

    • 7,000 RPM

    • 7 3/8 " O.A. length

    • 5 lbs.

    • 3.5 CFM

    • 3/8" airhose
    • 1/4" NPT air inlet

    This is as close as I can get:
    http://content.wmhtoolgroup.com/manuals/JSM-403_man.pdf
    All of the handle parts will be the same aa your model. The problem I am having is finding an exact match and there is not a KIT in this manual.
    I checked Chicago Pneumatic and Ingersoll Rand with no luck.

    You can try contacting Jet here:
    https://parts.maam.waltermeier.com/Contact.aspx

    I have been trying for over 2 hours to solve the mystery here with little success. I am sure by now you are as frustrated as I am.

    Kelly


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Product - Campbell Hausfeld TL1017 Butterfly Impact wrench I need a set of plastic valves. Where can these be purchased?


1-800-444-3353. This number is in the manual should you need some technical advice. I'd give them a call and see if they will mail you what you need. Can't find you a rebuild kit out on the net.

Sep 18, 2011 | Campbell Hausfeld TL1017 3/8" Butterfly...

1 Answer

Loosing too much air, loosing power


It sounds like you have to call the company and get a rebuild kit for that unit.

Mar 16, 2011 | Ingersoll Rand 1/2" Super Duty Air Impact...

1 Answer

Worn drive on my CP half-inch impact


That impact is distributed by Harbor Freight, though I doubt it is 25 years old. They may have a rebuild kit there, but a new one just like it is around $35.

This one:
d8e2205.gif
is priced at $24.99

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95310

Mar 25, 2010 | Chicago Pneumatic 1/2" Air Impact Wrench

1 Answer

Missing parts


The rebuild kit #295A-TK2 has all the parts to bebuild your existing model. The includes a new plunger and spring plus all seals and vanes for this model. Any IR dealer can get this for you.

Jan 16, 2010 | Ingersoll Rand 1? Heavy-Duty Air Impact...

1 Answer

Can't find a rebuild kit for POWERMATE air impact wrenck model o024-0099sp.


well pretty much IR (ingersoll rand) makes almost every impact out there. So you can try to navigate their web site, call sears or if you have a Snap On dealer, or matco, or cornwell, or Mac tools. Just call or check out the snap on website see what the dealer for your area is. Tell them what you got and they should be able to find you a kit. They are in the tool business and keeping mechanics wrench'n .

Mar 21, 2009 | Coleman Powermate P024 - 0099SP 1/2"...

1 Answer

I need to find a rebuild kit


http://parts4tools.com/store/page6.html

Mar 20, 2009 | Ingersoll Air Tools & Compressors

Not finding what you are looking for?
Garden Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

11211 Answers

yadayada
yadayada

Level 3 Expert

75235 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...