Question about HP Office Equipment & Supplies

1 Answer

I need to print apage of a bill. It willnot print the whole page and leaves the left side of the page blank and does not print all of the information on the right side

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 1,915 Answers

You do not state the model of your printer, but I have had issues where some items will not print if the resolution is too low. In the printer driver you should be able to set the print resolution. Start a print job as usual by selecting print. When the print window opens so that you can select which printer to use, there will be an option on the right hand side called "properties". Look under paper/quality or advanced and you should have the option to change print resolutions.

The other possbility might be that if you are printing from a website, it is only printing the main "frame" or section of the website. See if there is an option on the website for "print" or "download" The print option usually opens a new web page with no frames on it so it will print properly. The download option will allow you to download a copy that you can then open in a word processor or spreadsheet program and print from there.

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The print out of ZM400 misalign to the left. How to make it back to the centre of the label?


Printing from an Internet Browser can cause this result if you have not set the margins, footers, and headers.
File ' Page Setup
Change all margins to 0.01 (or as close as possible, it may override you) and all SIX bars below that to Blank or Empty.

Apr 10, 2013 | Zebra ZM400 Thermal Label Printer -...

1 Answer

When I send my job to the printer. The printer will print but only on 1/2 of the page. it looks like the printer think i want two sheets on one page


Hello,

Is the whole page you want printed on half the page is just half the data printed? If the whole page is printed on half the paper then the problem is software. If the page only prints the left side or the right side blank on the other side then the problem is most likely the fuser assembly. Can you take a picture of the page and email it to us, we will email you back with what needs to be done next.

Tech@ccl-la.com

Apr 30, 2010 | HP LaserJet 2300 Printer

1 Answer

HP 2840 will not print on 3 inches of left side of page


Take the toner cartridge out, shake it back and forth, and turn it around in a circle a few time. Put it back in the priter, and print. Order a new toner cartridge.

If this is an inkjet printer, ignore this response.

Apr 21, 2010 | HP LaserJet 2840 All-In-One Printer

1 Answer

Wireless signal is not lighting up and not getting a signal on my laptop, so I am unable to get on the internet


type 192.168.2.1 in Internet explorer and login to the router setup page..if it asks for a password leave it blank and click submit..on the left side of the page you can see an option called wireless.. below that "channel and ssid"...click on that and go and check whether the wireless mode is "on"...in belkin routers the wireless light willnot litup if the wireless switch in laptop is not turned on...so make sure the wireless switch in the laptop is turned on....
try this it ll work... and dont make any other changes in router setup page....

Mar 30, 2010 | Belkin N Wireless Modem-Router F5D8633au4A

1 Answer

Only prints on one side


Hi, You have to remove the Catdriges from the printer and clean both catdriges and the roller. This might sort your problem. Secondly before printing check the pagesetup of the particular file.

Mar 09, 2009 | HP PhotoSmart 7150 InkJet Printer

1 Answer

When printing or faxing there is a one to two inch blank spot


INSPECT THE DOCUMENT READER GLASS THIS SOMETIMES GETS WHITE OUT OR OTHER JUNK ON ON THE LENS AND LEAVES A VOID AREA.

Feb 19, 2009 | Brother IntelliFAX 4100 Laser Fax

1 Answer

Light print and leaves a blank stripe


Try the blue corona wire on top of the drum unit. If it is not right back to the left it will leave a line on every page.

Jan 04, 2009 | Brother HL 5040 Laser Printer

3 Answers

"Skip Blank Page" Set to 0.1% Yet still skips pages with footers and headers


We have the same problem where I work. We use a black texta and draw a line down the middle of the page. This gives the scanner a point to pick up apart from the minimal text at the top. However, this will only work if you are happy to have a line on your scanned document!

Apr 09, 2008 | Canon DR-9080C Path-Through Scanner

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...