Question about Pyle PLD51MUBT Car DVD Player

1 Answer

Screen is blank... still have sound and controls. too back to store and the screen worked on the store display model.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Your problem is the wires in the unit that hooks to the connection plate to the face plate there is a wire that burned up and not making the connection, youll see the wires when you put faceplate on and tilt your screen its like a orangish yellow wires that is hooked into the slot that your faceplate connects to a wire has burnt up probably caused by the brake wire that wasnt hooked up or from pulling off the faceplate to many times HAD TWO OF THESE DO THE SAME THING neither one I had ,had brake wire hooked up and probably caused it to short out.

Posted on Mar 29, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore microwave hood combination


If you have tried to reset the microwave oven by turning the mains power off and on without success then it is likely the display is faulty.
The only way to repair is replace the control panel board. This can cost a lot of money.

See this site to give you some idea. Best to contact a repair technician and get an idea of costs.
KENMORE ELITE Microwave Range Hood Controller Parts Model 72180839500

Aug 03, 2014 | Kenmore 1.4 cu. ft. Speedcook Microwave...

2 Answers

Oven will not come on. I set the temp and screen goes blank after 5 to 10 seconds. Lower element doesn't heat. Oven will broil.


This sounds like you may have a control panel issue. The display going blank and one element not working is what is making me come to this conclusion. You can have the board tested to see if it is faulty.
Do you have any error codes?

Aug 24, 2009 | Kitchen Ranges

3 Answers

Hp pavillion hdmi output was working fine and not the tv is dark. It shows a picture when booting up but once booted, the tv goes blank. Can you offer any solutions?


I had the same problem. The first time I used the HDMI port, it showed up perfectly on my TV.

But, next day I get a blank screen. When I rebooted the laptop it would show the windows splash screen and go blank.

I won't tell you how many things I tried that didn't work.

What you have to do is stupidly simple. Right click on the ATI logo in the systray, and then left click on catalyst control center. Run the basic wizard. I'm not sure which screen it is on but choose "clone". Suddenly, a miracle happens, and it works.

I don't know what kind of genius decided to make a second display not work at all unless you ran a wizard. But thats what I did to fix it.

Jul 07, 2009 | HP Pavilion dv7-1130us laptop

3 Answers

Screen blank


Sounds like its simply going into power save mode. Does your screen come back on when you move the mouse or press a key on the keyboard? Is the computer still on? Check your power options in control panel.

Nov 29, 2008 | Computers & Internet

1 Answer

Blank screen, cannot get menu to display, but sound works


Does the lcd screen have a glow to it ? Or is it really dim if u get real close to screen u can see images moving ?
it it has a glow to it you panel lighting is fine but you control board is bad. If you have a dark screen and see faint images you panel back lighting is out u can check the power with a meter at the connection to inverter board on panel.

May 03, 2008 | Televison & Video

1 Answer

Front display does not work


from your discription it sounds like a fault to me
revisit the store you purchased from

Aug 31, 2007 | Samsung SCH-a870 Cellular Phone

Not finding what you are looking for?
Pyle PLD51MUBT Car DVD Player Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pyle Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4834 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7713 Answers

Are you a Pyle Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...