Question about Uniden Cell Phones

1 Answer

We have a five (5) phone on one line with Uniden. We have checked all the outlets and everything seems in order. We can not get a line on the system. Help

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 262 Answers

The following tips come fromUniden.com website, hope this helps you. Question: What are things that I can check or do to get myphone working properly?
Answer:

1.Make sure phone is not sharing an ac outlet with any other types of electronicequipment. 2. Make sure base ac adapter is not sharing a multi outlet plug. 3. Make sure phone cord is not plugged into a splitter, fax, computer or remoteanswering machine. 4. Check to see if the phone cord is plugged in properly. 5. Check to see if the AC Adapter has been properly plugged in, the outlet is onand working. 6. Make sure phone jack is working. 7. Phone cord needs to be plugged directly into phone jack to insure optimalperformance. 8. Make sure you are using the original ac adapter that came with the unit. (Itshould say Uniden on it) 9. Make sure proper battery is being used .(It should be the one that camewith the unit, or a new Uniden battery) 10. Make sure battery is installed and plugged in all the way.( It shouldclick in) 11. Move phone to a different location in the home. (Different phone jack) 12. Disconnect AC Adapter and reconnect it After 25 seconds. 13. Reset the Digital Security Code if applicable - instructions can be found inowner's manual if applicable 14. If nothing else has worked. You can see if a basic reset will work on thephone. A reset is done by following the below steps:
a. Disconnect Battery from handset(s)
b. Disconnect Phone Cord from wall jack
c. Disconnect Phone cord from base unit
d. Disconnect AC adapter from wall outlet
e. Allow to sit for 30 min
f. Reconnect Phone Cord to base
g. Reconnect Phone cord to wall jack
h. Reconnect AC Adapter to wall outlet
i. Reconnect Battery to handset until you click or feel the plug snap intoplace
j. Re-Register Handset by placing on main base (Resetting security code -manually) 15. Check to see if you are on tone dialing or pulse dialing. 16. If you are still experiencing problems please call USAcustomer service at 1-800-297-1023, please tell them that a basic systemreset has already been completed and what the issues are still.

If you are in Australiaplease call: 1300 366 895 for all Service queries including producttroubleshooting.

Contact details for Uniden in other countries can be found at:

http://www.uniden.com/about/locations.cfm

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to wire a superstar DM-452 to a five pin uniden and washington


Trying to wire a dm-452 4 pin mic to a 5 pin uniden ... - Fixya

www.fixya.com/.../t22723929-trying_wire_dm_452_4_pin_mic_5_pin
Jan 6, 2014 - trying to wire a dm-452 4 pin mic to a 5 pin uniden washington -Uniden Bearcat Pro PC68XL ... SOURCE: trying wire a superstar dm-452.

How to wire a superstar DM-452 to a five pin uniden and ...

www.fixya.com/.../t26060852-wire_superstar_dm_452_five_pin_uniden
36 mins ago - how to wire a superstar DM-452 to a five pin uniden and washington - Uniden CB Radios question.

Wire superstar dm 452 mic - Answer

www.dqrkc.com/search/...uniden...pro.../wire_superstar_dm_452_mic
... to a 5 pin how to wire a dm-452 superstar 4 pin mic to a 5 pin uniden washingtonit's not possible to wire 4 wire mics to the uniden 5 wire radios without ...

Uniden Bearcat Pro PC68XL 40-Channels Base CB Radio ...


Jan 19, 2016 | Uniden Radio Communications

1 Answer

What does New CID:30 mean on my Uniden DECT 6.0 phone?


you probably need to delete some of you calls and you may need to uplug all you phone jacks from the outlet and wait 3-5 min and plug them back up that seems to fix a lot of problems with cordless phones

Jun 18, 2014 | Uniden Cordless Phone

4 Answers

I have a uniden Tru9466 base station and a uniden TWX 977 that the later that was previously registered with the first displayed a out of range notice so I went thru the process in the owner's manual...


Welcome to FixYa.

  1. Turn OFF your handset (TWX977) and any other handset registered to the base (9466).
  2. Unplug the base from its power source.
  3. Unplug the phone line from the base.
  4. Wait for 15 mins.
  5. Plug back the power source and the phone line.
  6. Turn ON the handset (TWX977)
  7. Reset the handset (TW977) by doing the following:
  • Press the MENU soft key. Select the DEREGISTRATION submenu.
  • ARE YOU SURE? appears. Move the cursor to select YES. Press the OK soft key.
  • To clear other handset information, please follow these steps:
  • From the handset, press and hold [ ] and [#] for more than 5 seconds. Select the DEREGISTER HS submenu.
  • Move the cursor to select the handset ID to be de-registered from the list, and then press the OK soft key.
  • DEREGISTER HS appears. Move the cursor to select YES. Press the OK soft key.
  • ARE YOU SURE? appears. Move the cursor to select YES, and then press the OK soft key. You will hear a confirmation tone.

8. Register the handset by doing the following:
  • With the base in standby, press the MENU soft key.
  • Move the cursor to select REGISTER HANDSET. Press the OK soft key.
  • On the handset, press and hold [#] until you hear a beep.
  • While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION
  • COMPLETE is displayed; the handset has been registered to the base. If REGISTRATION FAILED appears,
  • please try these steps again.

Thank you for using FixYa.
Have a great day.
Jas247

Aug 22, 2011 | Uniden TRU9466 Cordless Phone

1 Answer

My DECT6.0 telephone will not give me a dial tone nor answer any calls neither will the additional handset..Although my verizon direct line functions as it designed


Hello.

Here are some tips, found online:

Reset the phone:

Unplug the battery in the handset, unplug the phone line from the base and unplug the electricity from the base. Leave everything unplugged for an hour or two instead of a couple to five minutes that way you can get more of an idea of whether your phone will work. After an hour or two plug in everything. If resetting the phone doesn't work then try the next step.

Check the surge protector:

Is the phone line plugged into a surge protector? The surge protector may have stopped working or blown a surge, a sudden burst of electricity, which may have caused the dial tone in your cordless phone to go. Unplug the phone line from the surge protector then plug it back in and see if you get a dial tone. It could be that the phone line plugged into the surge was loose or not plugged in securely.

Try a different phone plug, outlet.

Check the base:

Is the base dusty and have possible dirt in the prongs where the phone sits? Lift the base and blow off dust.

Check the handset for dirt.


Rub metal connections on handset and base:

Use a pen cap or coin and rub the metal connections on the bottom of the handset. Rub the prongs, metal connections on base.

Hope these suggestions help.

Jul 25, 2011 | Uniden Cordless Phone

1 Answer

My phone screen says check TEL line. I have two Uniden cordless phones and both of them have no dial tone.


First be sure you have dial tone at the jack. Use a corded phone to do this with. If you do have dial tone then be sure you have ac at the outlet that the transformer is plugged in to. If there is no dial tone at the jack...go to your interface box outside and check for dial tone there....if none call the phone company. If you do have dial tone then you need to check your wires to the jack...or have the phone company do it for you. If you don't have ac at the outlet....check your breaker box or have an electrician check for you.

Nov 07, 2010 | Uniden Cordless Phone

1 Answer

No dial tone, just buzzing noise - should be 2 line phone, 1 jack


What you need is a dsl filter since you are working off a splitter. You can usually get these for free from your phone company.

Mar 20, 2009 | Uniden TRU9466 Cordless Phone

1 Answer

BASE UNIT IS NOT WORKING AT ALL, NOT LINE


Have you unplugged power and replugged power. wait about 5 minutes check the outlet to see if the plug has power.

let me know I will troubleshoot further.

Jan 21, 2009 | Uniden 5.8GHz Dual Cordless Phone

1 Answer

Uniden Power Max 5.8 - (TRU8880-2)


1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances.

please rate this post

Aug 04, 2008 | Uniden 5.8GHz Dual Cordless Phone

6 Answers

Tru9466 base and tru9465-2 handset


Same manual as lethean provided on a similar post but Page 24 if the previously used Base is Unavailable and your phone shows "Deregistration" in the Menu.

Base Unavailable (Handset Only)
To clear the base registration data in the handset, please follow these steps:
Press and hold [] and [#] for more than 5 seconds. Select the BASE UNAVAILABLE submenu.
BASE UNAVAILABLE appears. Move the cursor to select YES, and then press the OK soft key.
ARE YOU SURE? appears. Move the cursor to select YES. Press the OK soft key.

Mar 10, 2008 | Uniden TCX905 Cordless Accessory Handset...

8 Answers

Phones stopped working


I don't have a solution, but I can say that my phone does exactly the same thing and I know for a fact it isn't the line because I'm using another phone on that line right now.

Jun 09, 2006 | Uniden TRU4485-2 Cordless Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Cell Phones Experts

Cindy Wells

Level 3 Expert

5127 Answers

castletech
castletech

Level 3 Expert

372 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you an Uniden Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...