Question about Computers & Internet

2 Answers

ECS GeForce 9800 GTS+ Burn out of one small capacitor/diode as it not fully readable, it looks like C23, C25, C26, C28 (suspect C26). Need to know if its repairable or throw away? Is there a repairer anywhere in Australia? PC seems okay and now working off the Built-In Graphics of the ASUS M3N78 Pro Mobo. Thankyou Barbara

Posted by on

  • 1 more comment 
  • BarbM Mar 14, 2011

    My fault entirely, I neglected to add that it is 2 years and 4 months old, so it would be out of warranty.
    My apologies for the lack of information.

  • BarbM Mar 14, 2011

    My apologies for the lack of information, my graphics card is 2 years and 4 months old. So it is out of warranty.

  • BarbM Oct 04, 2012

    The company sent a replacement video card without any charge, no postage either I am pleased to say.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Easily fixed by anyone who is comfortable with a soldering gun. just de-solder the the joints on bad cap and replace it with a new one. Replace it with a cap on same of UF value and go next size up on the voltage part of it, will be a stronger cap.

Posted on Aug 07, 2012

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

If it's within warranty, I would contact the manufacturer to see if they'll repair it. Taking it to a repair shop would likely void the warranty.

Posted on Mar 14, 2011

Testimonial: "Assumed out of warranty end of story. Thanks for the direction to contact ECS, it may be a light at the end of a tunnel."

  • 2 more comments 
  • cptkaplan Mar 14, 2011

    If it's out of warranty, you might still want to contact the manufacturer to see if they have an upgrade program or can do an out-of-warranty repair. Unfortunately, circuit boards are generally built using higher-quality, professional equipment that isn't available at walk-in stores.

  • BarbM Mar 14, 2011

    Thank you, I will try contacting ECS and see what eventuates.
    Very disappointing considering I bought the best graphics card for gaming (something I asssumed to be strong) and although I don't use it for Games, I use it for watching DVD's through the TV.

  • BarbM Apr 22, 2014

    It has been some time since I have been here, a whole lot of life getting in the way.

  • BarbM Apr 22, 2014

    Geez what happened to that? Guess you don't press enter, just keep writing. My graphics card was replaced very quickly and they took it to discover why the capacitor burnt out. Quite happy with the no hassle and out of warranty replacement from ECS. Will definitely use them again.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 Suzuki TL1000R. It was running fine, then I stopped for gas. When I tried to start it, it would only turn over slowly, but would not fire, and the little F1 light came on. Help??


Open your rear seat and you'll see a black cap covering a connector/harness on the left side of the seat. If you take the cap off, you'll see it appears to be a normal harness. With your key in the ignition and bike turned to "on" (but not running), take a paperclip and short the two connectors out (by touching the two contacts together). This is known as a "ghetto dealer mode switch". It should display the error code on your display instead of just FI now.



Fuel Injection (FI) Code List:

C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR (1000 ONLY)

Jul 11, 2014 | 2003 Suzuki TL 1000 R

Tip

A list of the compatible PCI-Express 16X Graphics cards for a PCI-Express...


Having trouble finding out which graphics card will work with your PCI-Express motherboard? Here is a list all PCI-Express graphics cards for AMD/ATI Radeon. This list is in descending order. (The top graphics cards from each manufacturer are more recent, have greater memory and are faster while the bottom are older, have less momory and are slower).

If your Motherboard supports PCI-Express X16 then here is a list of compatible ATI/AMD Radeon Cards.
AMD Radeon 6000 Series - (AMD Radeon HD 6870 and AMD Radeon HD 6850)
ATI Radeon 5000 Series - (ATI Radeon HD 5970, ATI Radeon HD 5870 Eyfinity 6, ATI Radeon HD 5870, ATI Radeon HD 5850, ATI Radeon HD 5830, ATI Radeon HD 5770, ATI Radeon HD 5750, ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5870, ATI Radeon HD 5550 and ATI Radeon HD 5450)
ATI Radeon 4000 Series - (ATI Radeon HD 4870 X2, ATI Radeon HD 4890, ATI Radeon HD 4870, ATI Radeon HD 4850, ATI Radeon HD 4830, ATI Radeon HD 4770, ATI Radeon HD 4600, ATI Radeon HD 4550, ATI Radeon HD 4300 and ATI Radeon HD 4200)
ATI Radeon 3000 Series - (ATI Radeon HD 3800, ATI Radeon HD 3600, ATI Radeon HD 3400)
ATI Radeon 2000 Series - (ATI Radeon HD 2900, ATI Radeon HD 2600, ATI Radeon HD 2400)
ATI Radeon X Series - (ATI Radeon X1950, ATI Radeon X1900 and ATI Radeon X1800)

If your Motherboard supports PCI-Express X16 then here is a list of compatible Nvidia Cards.
GeForce 500 Series - (GeForce GTX 580)
GeForce 400 Series - (GeForce GTX 480, GeForce GTX 470, GeForce GTX 465, GeForce GTX 460, GeForce GTS 450, GeForce GT 440, GeForce GT 430, GeForce GT 420)
GeForce 200 Series - (GeForce GTX 295, GeForce GTX 285, GeForce GTX 280, GeForce GTX 275, GeForce GTX 260, GeForce GTS 250, GeForce GTS 240, GeForce GT 220, GeForce GT 210)
GeForce 9 Series - (GeForce 9800 GX2, GeForce 9800 GTX+, GeForce 9800 GTX, GeForce 9600 GT, GeForce 9600 GSO 512, GeForce 9600 GSO, GeForce 9400 GT)
GeForce 8 Series - (GeForce 8800, UltraGeForce 8800 GTX, GeForce 8800 GTS (640 MB, 512MB and 320 MB versions), GeForce 8800 GT, GeForce 8800 GS, GeForce 8600 GTS, GeForce 8600 GT, GeForce 8500 GT, GeForce 8400 GS)
GeForce 7 Series - (GeForce 7950, GeForce 7900, GeForce 7800, GeForce 7600)
GeForce 6 Series - (GeForce 6800 Ultra, GeForce 6800 GT, GeForce 6800 GS, GeForce 6800, GeForce 6800 XT)

For a list of compatible AGP8X Cards for an AGP8X Motherboard click on this link to take you to my other tips page. http://www.fixya.com/support/r6784133-list_compatible_graphics_cards_agp8x

on Feb 10, 2011 | Computers & Internet

1 Answer

I have a 2004 gxsr 1000 with fault code c42. It wont start. oil light is flashing and displays FI on the temp. Bike just crank but will not fire it up. Help?


Grab a paperclip.

Place the bike in Neutral, and take the rear seat cowling off. On the side of the bike between the tail section and the trunk you will find a connector that is covered by a rubber cap, and has two wires running into it. Remove the cap and take note of which one of the 4 sockets the two wires go to. Turn the bike ON and start it up, short the wires out with the paperclip. Where your speedo was flashing a -CHEC- with the temp should now be a CXX error code. Write this code down. Then shut the bike off. Match the code up with the list below. Grab a Manual and get to work!

(What you have just done is put the bike into "Dealer Mode".

GSXR Fuel Injection (FI) Code List:

C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR (1000 ONLY)

03-04 GSXR1000 Workshop Manual Verify Download

Sep 26, 2012 | 2004 Suzuki GSX-R 1000

1 Answer

I have a Suzuki GSX-R 750 and my F1 one light has started to come on when I excelerate some speed what does that mean.


Odds are its your SET valve needing adjustment, have the codes pull on the bike. If it is the SET, you can remove the SET system easily or you can have it adjusted.

If you get a code.

The codes are as follows:
C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIP OVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR
C00 - NO FAULT

Jun 28, 2011 | 2007 Suzuki GSX-R 750

1 Answer

Hi i have a 2004 sv1000s not getting any fire from the spark plug line i put the bike in dealer mode an i got c41 what dos that mean ?


GSXR Fuel Injection (FI) Code List:

C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR (1000 ONLY)

heres a list of fault codes hope it helps

John

Jan 04, 2011 | 2003 Suzuki SV 1000 S

1 Answer

Hi. i have a compaq presario sr5025an. I have 2 gig of ram. I have the intel core 2 duo e4300 processor. I am after a grapics card. cheers.


To get the full specs of your mainboard go to: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00893006&lc=en&cc=au&lang=en&product=3401230&dlc=en#N198

This motherboard has 1 PCI Express x16 slot for a graphics card.

You could use:
Geforce 6 series (6800GT)

Geforce 7 series (GeForce 7950, GeForce 7900, GeForce 7800, GeForce 7600 ,
GeForce 7300, GeForce 7200 and GeForce 7100)

Geforce 8 series (GeForce 8800 Ultra, GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 GTS 512, GeForce 8800 GT, GeForce 8800 GS, GeForce 8600 GTS, GeForce 8600 GT and GeForce 8500 GT)

Geforce 9 series (GeForce 9800 GX2, GeForce 9800 GTX+, GeForce 9800 GTX, GeForce 9600 GT, GeForce 9600 GSO 512, GeForce 9600 GSO and GeForce 9400 GT

Geforce 200 series (GeForce GTX 295, GeForce GTX 285, GeForce GTX 280, GeForce GTX 275, GeForce GTX 260, GeForce GTS 250 GeForce GTS 240 and GeForce GT 220

Geforce 400 series (GeForce GTX 480, GeForce GTX 470, GeForce GTX 465, GeForce GTX 460, Geforce GTX 450)

With your system however I would recommend nothing greater than a Geforce GTS 250.

Please rate me high.
Thanks.

Nov 01, 2010 | HP Computers & Internet

2 Answers

What is the best pc graphics card? for blu-ray and 3d.


This is the list of Nvidia Gfx cards that can support blu-ray and 3dvision
NVIDIA GeForce Graphics Cards
GeForce 400/300 Series GeForce 200/100 Series GeForce 9 Series GeForce 8 Series 3D Gaming Desktop
GeForce GTX 480
GeForce GTX 470
GeForce GTX 465
GeForce GTX 460
GeForce GT 340
GeForce GT 330
GeForce GT 320 Desktop
GeForce GTX 295
GeForce GTX 285
GeForce GTX 280
GeForce GTX 275
GeForce GTX 260
GeForce GTS 250
GeForce GTS 240
GeForce GT 140 Desktop
GeForce 9800 GX2
GeForce 9800 GTX+
GeForce 9800 GTX
GeForce 9800 GT
GeForce 9600 GT Desktop
GeForce 8800 Ultra
GeForce 8800 GTX
GeForce 8800 GTS
GeForce 8800 GT 3D Applications Desktop
GeForce GTX 480
GeForce GTX 470
GeForce GTX 465
GeForce GTX 460
GeForce GT 340
GeForce GT 330
GeForce GT 320 Desktop
GeForce GTX 295
GeForce GTX 285
GeForce GTX 280
GeForce GTX 275
GeForce GTX 260
GeForce GTS 250
GeForce GTS 240
GeForce GT 140 Desktop
GeForce 9800 GX2
GeForce 9800 GTX+
GeForce 9800 GTX
GeForce 9800 GT
GeForce 9600 GT Desktop
GeForce 8800 Ultra
GeForce 8800 GTX
GeForce 8800 GTS
GeForce 8800 GT 3D Pictures Desktop
GeForce GTX 480
GeForce GTX 470
GeForce GTX 465
GeForce GTX 460
All GeForce 300 series Desktop
All GeForce 200 series Desktop
All GeForce 9 series Desktop
All GeForce 8 series Blu-ray 3D playback* Desktop
GeForce GTX 480
GeForce GTX 470
GeForce GTX 465
GeForce GTX 460
GeForce GT 340
GeForce GT 330
GeForce GT 320 Desktop
GeForce GTX 480
GeForce GTX 470
GeForce GTX 465
GeForce GTX 295**
GeForce GTX 285**
GeForce GTX 280**
GeForce GTX 275**
GeForce GTX 260**
GeForce GT 240 Notebook
GeForce GTS 360M
GeForce GTS 350M
GeForce GT 335M
GeForce GT 330M
GeForce GT 325M
GeForce GT 320M 3D Movie file playback Desktop
GeForce GTX 480
GeForce GTX 470
GeForce GTX 465
GeForce GTX 460
All GeForce 300 series Desktop
All GeForce 200/100 series Desktop
All GeForce 9 series Desktop
All GeForce 8 series * Blu-ray 3D playback requires compatible Blu-ray 3D player software from companies such as CyberLink and Arcsoft. Please continue to check the 3D Vision product home page for more details on Blu-ray 3D support.
** Blu-ray 3D GPU decode acceleration is not supported on these models. Please insure that your CPU is fast enough to handle video decode (a quad-core CPU recommended)-->
And don't know about ati graphic cards which has these features. i'm sure i have given you a satisfactory answer.
For further any help or to thank me you can mail me on my email Ejaz89@live.com

Aug 08, 2010 | Computers & Internet

1 Answer

F1 code on my 2006 suzuki gsxr. it just started an 2 hrs ago drove it home in 20 degree weather now f1 code and no start


When the red light comes on, eg (F1) use these fault codes to find your problem. To extract the codes from the computer system, there is a two pinned connector hanging out of the wiring harness, on the left hand rear of the bike, (say above the pillion foot peg under rear trim. Be sure not to confuse the other connector used by the Suzuki Workshop Mechanics, as this has four or five wires to the connector) After locating the one with only two wires at the back, use a split pin or paper clip to bridge the two wires togeather and turn the ignition to the ON position. You should now be able to read the code on the console. The fault codes are as follows,,
**** GSXR Fuel Injection (FI) Code List:*****
C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR C29 - SECONDARY THROTTLE POSITION SENSOR C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL

Feb 03, 2010 | 2006 Suzuki GSX-R 600

1 Answer

Red light on odometer comes on.... And f1 light also


That is the Suzuki equivalent to a "Check engine light"

Turn your key on and verify the FI light is on and that your red kill switch is set to 'Run'

Remove your seat and behind the battery area you should find a white 6 pin connector (likely with a black rubber boot on it) Using a paperclip connect the white/red striped wire to the black/white striped wire.

Your display should Now read whatever codes are active.
If it reads C00- then there are no active codes. Note that when you turn the key off, the memory is erased so if you have an intermittent fault you should not turn the key off until you pull the codes.

Codes are as follows:

C11 - CAMSHAFT POSITION SENSOR
C12 - CRANKSHAFT POSITION SENSOR
C13 - INTAKE AIR PRESSURE SENSOR
C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C36 - SECONDARY INJECTOR SIGNAL #1
C37 - SECONDARY INJECTOR SIGNAL #2
C38 - SECONDARY INJECTOR SIGNAL #3
C39 - SECONDARY INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR
C49 - PAIR CONTROL SOLENOID VALVE
C60 COOLING FAN CONTROL SYSTEM



Sep 09, 2009 | 2007 Suzuki GSX-R 1000

2 Answers

Yes have 2006 gsxr 600 it flashs F1 will not crank


there is a plug under your seat with 2 wires that you need to short out. The fI code is a dealer code like a check engine light on your car. You need the actual problem code. turn the bike on and keep it running short out the two wires in a white harness under your seat and then the f1 will change to a C## code.
C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR (1000 ONLY)

Also a good place to look to make sure you have the correct wires is :
http://www.gixxer.com/forums/showthread.php?t=192222
it is a great site to belong to for future issues or just for fun

Sep 03, 2009 | 2008 Suzuki GSX-R 600

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...