Question about Coby DP-772 Digital Picture Frame

1 Answer

Cannot down load pictures to frame from computer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 70 Answers

The following instructions should be able to help you transfer pictures/images and music from your computer to the frame.
Power ON the frame.
Connect the small end of the USB cable to the USB port on the side panel of the Digital Photo Frame.
Connect the larger end of the USB cable to the USB port on your computer.
You will see some extra "Removable Disc" drives in "My Computer" -- One for each of the memory card slots on the Digital Photo Frame. And the last one is for the Internal Memory of the frame. Double-click on the last "Removable Disc" icon to access the internal memory of the frame. From here you can copy images and music files to the frame. You need to transfer the images or music files into this folder (which is the internal memory of the frame). Copy the files from your computer and paste them in this folder.
The picture files should be in the "standard JPEG" format and the music files should be in the "mp3" format.
To disconnect the Digital Photo Frame from your computer:
In Windows, on the bottom taskbar, right click the icon which appears in a green color, (this icon has an arrow pointing towards the left) and select "Safely Remove Hardware".
The Safely Remove Hardware" dialog box will appear. Select "USB Mass Storage Device" and click "STOP"
On the next dialog box, click "OK" to remove the storage device.
On the next dialog box, select "CLOSE" and disconnect the USB cable from your computer.
Now you should be able to see the pictures on the digital photo frame.

Thanks.

Posted on Mar 14, 2011

  • vinay p Apr 11, 2011

    You gotta go into My Computer (if you are using windows) and find where the card goes to when you put it in. Also, make sure there isn't a tab or something on the side of your card that makes it read only or whatever..


    thanks.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I load pictures to my 7 inch Optimus frame with the card out of my camera


You must be sure the frame will read the file format of the camera. If not, then load the pictures on your computer, use a file conversion program and use a second SD card to load the pictures on then put it in the frame.

Jul 05, 2015 | Photography

1 Answer

Can not down load pictures from smartparts to computer


Email the photos to yourself. Open email with computer. Download jpeg attachment.

Jan 07, 2015 | SmartParts SPX8 Digital Picture Frame

1 Answer

Cant find directions. Frame uses sd card. how do i get pics to card. I think i have the right cable at least it fis


You load the pictures on to a computer that has a SD card slot and down load the pictures to the SD card and then put the SD card in your Frame where they can be displayed.

Dec 29, 2010 | Cameras

1 Answer

Transfer pictures from memory card


Ok what you need to do is you need to put your memory card into your computer/mac and down load the files once that is done delete the photos on your camera!

Mar 27, 2010 | PANDIGITAL 6.0-Inch Digital Picture Frame...

2 Answers

Do not know how to transsfer pic fromcomputer to the Kodak pic frame


On one side of the frame there should be memory card slots and a usb slot.
two ways to do it, take the memory card from the camera and put it in the frame.
Or down load the camera to tyour computer and then with a usb cable upload the picture fram with the pictures you want
Or from your computer load a memory card and then stick it in the frame

Feb 20, 2010 | Kodak EasyShare SV811 (8858946) Digital...

1 Answer

Brookstone my life pocket album error


I had the same problem. I lwas able to load more pictures because I bypassed the function. It is easy. Just open the resized picture file on your computer, then, copy (control c) the pictures you want, and then open the photo album device through "my computer" and paste into the appropriate album. My digital photo album was listed as F Drive in my computer.

Feb 06, 2009 | Tao MUSIC SPECTARE 5.6 DIGITAL PICTURE...

1 Answer

Transfer pictures


Plug the frame into the usb slot on your computer. Open up the folder with your pictures on it. Then open up my computer and look for the drive that is the frame. Drag your pictures right to the frame,s drive.,

Dec 13, 2008 | PANDIGITAL 7-Inch Digital Photo Frame with...

2 Answers

SmartParts Frame SPX7E only allows me to load 165 photos


2 answers...

To remove a picture, connect the frame to your PC via USB. you should see the frame appear as a drive, in my case,
36972 (E:)

open the drive as Explore, you can now see the pictures, and delete what you no longer want.

you can download the software from
http://www.smartpartsproducts.com/content/support/optipix/index.php

Nov 27, 2008 | SmartParts (1DPFSP01) Digital Picture...

2 Answers

Downloading pictures


Use an sd memory card. Transfer your pictures from your camera or computer to the card then put the card in the slot on the frame. You can buy them for as little as six dollars.

Nov 25, 2008 | SmartParts SPX8 Digital Picture Frame

2 Answers

Kodak easy share SV 811


I had the same problem. I use kodak easyshare software and load my pics on to that. Then put all the pics you want in the picture tray. Have your frame plugged into the computer with your usb cord. Then go up to File menu and drop down to "copy to". On my computer it is Folder "E" which is the drive the frame is connected to. Then pick from the Resize drop down menu " best for picture frame', then click copy. You will see the program loading all the pics to E drive. When done, unplug usb cord and you will see it loading on your pic frame. As easy as this is to do, I found it frustrating as well, but when it works, it is easy. Hope this helps

Aug 04, 2008 | Kodak EasyShare SV811 (8858946) Digital...

Not finding what you are looking for?
Coby DP-772 Digital Picture Frame Logo

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coby Photography Experts

kakima

Level 3 Expert

102366 Answers

richie46

Level 3 Expert

12962 Answers

Brad Brown

Level 3 Expert

15639 Answers

Are you a Coby Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...