Question about Lexmark Prospect Pro205 Wireless All-In-One InkJet Printer

2 Answers

The back ground is all blue - Lexmark Prospect Pro205 Wireless All-In-One InkJet Printer

Posted by on

Ad

2 Answers

  • Official Brand Answer
  • 3,344 Answers

That sounds like a printhead problem. Lexmark recognizes that some of our inkjet all-in-one customers may be experiencing issues with their print quality. We take our customer user experience very seriously, and we strive to ensure that each time a customer prints using a Lexmark device the page is crisp, clear and up to the highest standards.
However, if your device is displaying a 'printhead error' on the hardware and/or you are suddenly experiencing a print quality issue, please contact the Lexmark Technical Support Center at 1-800-539-6275.
Lexmark agents are prepared and able to help diagnose and resolve your issue. This may involve updating your printer firmware and/or replacing the printhead for your printer, at no charge to you, our customer. Installation is quick and easy for any customer to perform.

Posted on Jun 23, 2011

  • Lexmark
    Lexmark Jun 30, 2011

    Alternatively, you can point your browser tohttp://bit.ly/lFKDzs for online technical assistance.

  • Lexmark
    Lexmark Jul 12, 2011

    I would like to follow up if you're still having print quality issues or still experiencing printhead error messages.

    Please let me know if you have other concerns.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,087 Answers

Try updating the firmware of your printer. Just go to www.lexmarklabs.com/firmware and choose the model number of your printer.

After applying the firmware update, try to do a "Deep Clean Printhead". To do that, on the control panel of your printer, press on Setup > Maintenance > Deep Clean Printhead.

If you still have the same problem, please go to this link for more info: http://bit.ly/mDKqh7

Posted on May 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A puting my mp730 back togathere don,t remember were a blue wire go,s a srcew loop at each end of wire.


Blue wire or green wire? If you have trouble with your color vision, have somebody else verify this. Green wires (or green wires with yellow stripes) with ring terminals (especially if they have teeth like lock washers) are used for electrically bonding the metal parts of the system to the ground terminal. In that case, you would look for threaded holes in the metal parts of the frame.
A blue wire may go to a screw terminal block, typically for the hot terminal from the AC power connection along with a brown wire for neutral, but screw terminal blocks are rare in desktop printers. More commonly the AC power goes through a nylon two-pin or three-pin connector that mates with a corresponding connector on the power supply board, and the AC wires are usually black and white instead of blue and brown.

Hint for future projects: When I remove a grounding wire from a chassis, I put the screw back in the hole (several turns, not tight) to remind me where the ground connection goes. (A loosely inserted screw not holding anything is waiting for that wire.) If you really want to be sure, tie a green thread around the screw, and remove the thread when you are ready to replace the grounding wire.

Nov 09, 2011 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Need colour coding for wiring back of radio


black= ground

blue= antenna

red= power ingition

yellow= 12volt battery

blue\white= amp turn on

Jul 17, 2009 | Sony CDX-S2000 CD Player

2 Answers

Electric trailer brake hookup


Truck Brake control

Red/Black stripe Black

Blue Blue

Lt. Blue/white stripe Red

White White

Orange Not used

Jun 28, 2009 | 2006 Toyota Tacoma

1 Answer

Putting in a alpine deck into my cirrus


Constant 12V+ Pink/Yellow Switched 12V+ Red/White Ground Ground/Back Strap Illumination Orange/Brown Dimmer Black/Light Blue Antenna Trigger Orange/Red Antenna Right Rear Front Speakers 6 1/2" Doors Left Front (+) Light Green/Green Left Front (-) Light Green/Purple Right Front (+) Light Blue/Green Right Front (-) Light Blue/Purple Rear Speakers 6" x 9" Rear Deck Left Rear (+) Brown/Yellow Left Rear (-) Blue/Light Blue Right Rear (+) Dark Blue/White Right Rear (-)

Dark Blue/Orange

Mar 28, 2009 | Alpine CDA-9847 CD Player

1 Answer

Power


BATTERY CABLE TO AMP B+
GROUND CABLE TO AMP GROUND
REMOTE WIRE CABLE FROM AMP CONNECTS TO BLUE REMOTE WIRE ON BACK OF CD DECK.
RCA JACKS GO FROM REAR OUTPUT OF CD DECK TO LOW FREQUENCY ON AMP INPUT.

Check Power cable fuse, check ground is grounded to non painted surface.
This is all you need to get it to work. If you still have a problem, then it is a bad capacitor inside the amp

Jan 30, 2009 | Car Audio & Video

1 Answer

Sterio wireing problem 1996 dodge avenger


Hi,

To my knowledge most 1996 Dodge Avengers do not have a ground wire, instead, it uses a braided strap screwed into the rear of the radio unit. However in some units, the ground uses Black/Yellow.

Additionally:
Constant 12V+ Red
Switched 12V+ Blue
Ground Black/Yellow
Illumination n/a
Dimmer Green/Yellow
Left Front (+) White/Blue
Left Front (-) Black/Blue
Right Front (+) White/Red
Right Front (-) Black/Red
Left Rear (+) Yellow/Blue
Left Rear (-) Gray/Blue
Right Rear (+) Yellow/Red
Right Rear (-) Gray/Red

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jun 16, 2008 | 1996 Dodge Avenger

2 Answers

Plymouth voyager


Hi Marlon,

Not a whole I can do to help. What I can do is refer you to go get a Chilton, or Haynes manual thac voers your Plymouth Voyager. They have schematics with wire colors labeled.You will have a good shot at figuring out which wire is which.

Nov 24, 2007 | Car Audio & Video

1 Answer

15'' philips 105 ss model


u have to press menu (or OK) button for about 15 sec

Nov 08, 2007 | Philips 190B6CB/27 19" LCD

Not finding what you are looking for?
Lexmark Prospect Pro205 Wireless All-In-One InkJet Printer Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...