Question about Mesa 2 Hour Fire Safe 4.0 Cu. Ft. Electronic Mfs100e

1 Answer

Suddenly we can't open our Church Safe. It has worked fine for almost 2 years. We have replaced the batteries with new fresh ones but still can't get the electronics to allow us to open it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Hi.

The safe can lock up under determined conditions. Since safes are security anti-theft devices, in case they do not open, they can only be accessed with the help of the manufacturer.

Please, call Mesa Live Technical Support. The operators are available Monday - Friday 8:00am - 4:30pm (Pacific Standard Time)
The phone number is toll free. Here the number: (800) 490-5624.

Using Mesa online page you can also identify the model and download the manual. It is better finding out the safe model before contacting the Mesa by phone, so to speed up support operations.

Please click here to access Mesa support page.

Regards.

Ginko.

Posted on Mar 13, 2011

  • Ginko
    Ginko Mar 30, 2011

    Have a blessed day.

    Goodbye.

    Ginko.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote's volume control suddenly powers off TV


Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience. In some cases, the remote control might need to clean.
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

Jan 18, 2016 | Samsung AA59-00784C - New AA5900784C...

2 Answers

Suddenly my harmony 650 will not work. batteries fine


Check the remote control for its infra-red emission. Check it with fresh batteries. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/

Oct 05, 2014 | Logitech Harmony 650 Remote Control

2 Answers

After a four day power outage, my APC BE325R buzzes continuously when started, even though nothing is plugged into it. Has the battery suddenly died, or does it require recharging? Its a very loud buzz -...


It is probably a bad battery. They usually don't last much longer than 2-3 years. You could try replacing the battery, but I would suggest just replacing the whole UPS with a new model.

Sep 08, 2011 | APC BE325 SURGE PROTECTOR + BATTERY...

1 Answer

Camera was working fine, but suddenly battery life is short


dang I thought it was just me. I put so many brand new batteries in the camera,all kinds, no matter what it completely dead in about 2 minutes.. its frustrating b/c I got the camera last year as a xmas gift, so I really thought I was just an idiot when it came to operating the camera.. glad to know its just a crappy product; I still don't have a resolution though... sorry

Jan 01, 2010 | Samsung Digimax S730 Digital Camera

4 Answers

How to unlock a cathedral electronic safe ea25


After opening the electronic safe (with the pre-set factory code of 159B) locate the small red button on the
inside of the door near the hinge.

2. Press the red button and then release it, you will hear a beep. DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED THAT YOUR NEW SECURITY CODE HAS BEEN ENTERED CORRECTLY.
3. With the door open, enter your own personal security code, which can be 3- 8 digits long, and confirm your new code by pressing the letter “B” on the electronic touch pad. Before you close the door, try the new security code to make sure the lock release the knob so you can turn it and retract the live action locking bolts.
If the code fails, go through steps 1-3 again. If the code works successfully, then you should lock the safe. When you open the safe in the future enter the security code you have set followed by the letter “B” and turn the knob.

If the incorrect security code is entered 3 times you will have an automatic lockout for 20 seconds before you can try your code again. If the incorrect security code is entered 3 additional times there will be a 5- minute lockout before the code can be tried again.

BATTERY REPLACEMENT
This safe uses 4- AA batteries. Under normal use, batteries will last about 1 year. When the battery is low, a red light will come on warning you that the battery is low. To test the batteries, enter your security code. If the batteries are low the red light located in the middle of the top of the keypad will start to flash.

To replace the batteries, open the safe door with your security code and turn the knob. Push the batteries cover plate, which is located on the back of the door, and replace the old batteries.

YOU MUST PROGRAME YOUR SECURITY CODE AFTER YOU REPLACE THE BATTERIES. SEE STEPS 1- 3 UNDER “ENTERING YOUR SECURITY CODE”.
TROUBLE KEY
A “Trouble key” has been provided in case you forget or lose your security code. Remove the small central panel from the front of the faceplate. Insert the key and turn it counter clockwise. Then turn the knob on the door towards the right. This will manually open your safe. If you lose your key, you may purchase a replacement key by referencing the serial number located under the central panel by the lock.
MAINTENANCE FOR KEY AND ELECTRONIC SAFE
If the door of the safe starts to rub on the door frame, open the door per the instructions above. By the door hinges you will find a threaded stem. Use an Allen wrench to tighten the threaded stem. This will help realign the door and give you trouble free access to the contents of your safe.

Nov 01, 2009 | Home Security

5 Answers

Sentry safe S3877 have key and know combination but battery dead


Use paperclip to push in pin size hole below keyboard and then slide panel to right. Battery box is right there. Replace batteries and then was already to accept code.

Apr 08, 2009 | Sentry Fireproof Safe

1 Answer

Outlook problum


Unistall Outlook and then reinstall it. Make sure that all the updates are downloaded after you reinstall it as well.

Aug 07, 2008 | Microsoft Office Professional 2007 Full...

8 Answers

Safe mode


To get your 550 out of safe mode, follow these steps.
1. Remove the batteries.
2. Hold the '2' button down.
3. While still holding the '2' button down, replace the batteries.
4. The remote will boot into the normal functionality.

Note: If the 'Off' button is held down while inserting the batteries, the remote will boot into 'Safe Mode'.

Sep 29, 2007 | Logitech Harmony 550 Remote Control

1 Answer

No picture come out after trun on poer


I think maybe your battery is Kaput? will it work OK on just the power supply with battery removed...? If so then thats ya problem need a new battery... It also may be a software conflict or a power management issue try working in "Safe" mode see if it stays same. If it does then some settings are wrong return to all "Defaults" see if that works.

Jul 30, 2007 | HP Pavilion zt3340us (PF087UAR) PC...

1 Answer

Suddenly the batteries have started dying after 2-3 photos


did you try using lithim recharge battery i my self had the same problem with 1sd pentax ithout my camera was naced

Mar 25, 2007 | Olympus Camedia D-580 / C-460 Digital...

Not finding what you are looking for?
Mesa 2 Hour Fire Safe 4.0 Cu. Ft. Electronic Mfs100e Logo

504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mesa Home Security Experts

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

15478 Answers

yadayada
yadayada

Level 3 Expert

75130 Answers

Are you a Mesa Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...