Question about Polaroid i832 Digital Camera

1 Answer

The lens cover is not opening or zoom lenz extending

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 111 Answers

This problem is caused because that the lens servo can`t move the unit of lens. this menssage mean that the sistem don't go out the lens.
You have to sincronise the mechanism of the lens, carefully disarm the unit and review that the gears are ok....

Thanks.

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Digital zoom error on an A600, lenz will not retract either


Have you tried spraying a can of compressed air into the lens assembly? All it takes is small piece of debris like a grain of sand to jam up the assembly.

Hope this helps

Jul 07, 2008 | Fuji FinePix A600 Digital Camera

1 Answer

Error code S0042, DIMAGE G600


The S0042 error code relates to a problem with the zooming mechanism (lens would not retract or extended)
Press the power button on and hold it down while extending and twisting the telescopic zoom lens. It might fix your problem. Let me know if it worked!

Feb 14, 2008 | Konica Minolta DiMAGE G600 Digital Camera

1 Answer

How to clean the lens from the inside


you can purchase lens cleaner Cd from market but best way to remove your CD rom cover and clean the lenz manually with lenz cleaner liquid are available in market or just use tissue paper.

Dec 06, 2009 | InFocus Computers & Internet

1 Answer

I dropped my olympus 540 zoom camera and lens cover is jammed


The problem you are describing is a problem with a sensor in the lens assembly of the camera. It seems to have failed and needs to be replaced. Following are the instructions to send your camera to Olympus for service.

http://olympusamerica.com/cpg_section/cpg_servicerepair.asp

Olympus will charge a flat rate repair fee for this product if beyond the one year factory warranty or the warranty is voided. The cost is $73 plus your local sales tax. This covers parts and labor, factory cleaning and diagnostic check, 6 month warranty and the cost of shipping the product back to you is all included in that price.

May 18, 2009 | Olympus SP-350 Digital Camera

1 Answer

My phone thinks the lens cover is closed when taking photos


This Seems to Be a Fault With Your Phone And May Not Be Able To Be Fixed unless done Professionally.
1. Take The Back cover Off your Phone And Take the Battery out Then close the lens cover, then put the battery bakc in then go onto camera and open your lenz, this might work, if not then your camera might not work. thankyou,

Dec 08, 2008 | Sony Ericsson W800i Cellular Phone

1 Answer

Automatic lens cover won't open.


Try this only as a last resort after blowing lots of compressed air in there to clean the mechanism. Also with the lens barrel extended, tap it with a pencil (a grain of sand is usually the culprit, this may help to dislodge it). If that doesn't work, it may be necessary to go in there. The following repair will expire your warranty, so be forewarned.

This blog post outlines repair procedures for stuck lens covers. An A400 is used as an example. But for the A620, you might want to extend your zoom all the way out before removing the camera's batteries. Also you'll be applying the ring loosening rubbing alcohol around the barrel's perimeter instead of the front as shown in the procedures.:

http://camerarepair.blogspot.com/2007/11/repair-of-stuck-lens-covers.html


Good luck, and remember to do this only as a very last resort. Oh, and if you do decide to try the repair, please post how it went.

Oct 17, 2008 | Canon PowerShot A620 Digital Camera

1 Answer

ZOOM ERROR


I used to get that error all the time with a earlier Fuji FinePix with the slide-over lens cover. If the cover wasn't pushed back completely, the lens would extend only so far and then give an error. Make sure that there's nothing (dirt, hair) on any of the lens surfaces and make sure the lens is fully extending when you do turn the zoom on. Don't let anything touch or bump the zoom while it's moving, either.
Not sure if this will help, since you have a different model. This is what worked for me, though.

Nov 16, 2007 | Fuji FinePix F470 Digital Camera

1 Answer

Lens cover stays open


Try blowing lots of compressed air around the open lens shutter to clean the mechanism. Or use a hair dryer for a few seconds (don't want to heat up the camera). Also with the lens barrel extended and pointed downward, tap the lens barrel with a pencil while you extend and retract the lens by powering the camera on and off. A grain of sand in the mechanism is usually the culprit, and you want to try to dislodge it.

You can open it up, but only as a very last resort. The above procedures usually work if you try them enough. But for those particularly nasty stuck mechanisms, here's an example repair on a Canon Powershot A400 (do this at your own risk, and it will void your warranty):

http://camerarepair.blogspot.com/2007/11/repair-of-stuck-lens-covers.html

Oct 30, 2007 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

Kodak DX6340 Lens Cover Does Not Open


Try blowing lots of compressed air around the open lens shutter to clean the mechanism. Or use a hair dryer for a few seconds (don't want to heat up the camera). Also with the lens barrel extended and pointed downward, tap the lens barrel with a pencil while you extend and retract the lens by powering the camera on and off. A grain of sand in the mechanism is usually the culprit, and you want to try to dislodge it.

You can open it up, but only as a very last resort. The above procedures usually work if you try them enough. But for those particularly nasty stuck mechanisms, here's an example repair on a Canon Powershot A400 (do this at your own risk, and it will void your warranty):

http://camerarepair.blogspot.com/2007/11/repair-of-stuck-lens-covers.html

Aug 13, 2006 | Kodak EasyShare DX6340 Zoom Digital Camera

Not finding what you are looking for?
Polaroid i832 Digital Camera Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Polaroid Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...