Question about Philips 51PW9303 51" Rear Projection HDTV-Ready Television

2 Answers

Philips tv 102cm rear projection

Tv has lines across top and bottom of screen,also everything is in double vision

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am having a similar problem with my 51pw9303. Are the two convergence ICs about 2 inches by an 1.5 inch (quite large competed to all other IC on the PCB) and soldered to the main PCB?
I guess I am trying to find out which ICs to replace.
What about the resistors where are they at?

Thank you in advance

Posted on Aug 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 8,617 Answers

You need to replace both convergence ICs they are STK392-120 and you will also need 4 of the 6.8 ohm 1watt resistors. You can get replacement ICs and resistors at the following link and they provide free instalation instructions with pictures.
http://servicemanuals.vstore.ca/

Posted on Aug 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red and blue streaks across the screen top and bottom


The Convergence Amp IC's are bad. You should call a good TV Tech for this repair.

Jul 11, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

My 60" Magnavox projection tv has verticle double vision giving a red line across the top of eveything. All titles and captions are red over white.


hi

this type of problem occurs because of 3 issues..
1.colour wheel
2.jungle 45e3 ic on D- board
3.cathode ray tube...
check them...

thank u..///please rate it

Jul 04, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Color lines in tv screen


it's an lcd filter fault it's betwine lamp and screen before mirror, seems like u will need to replace it but it hard to say without look at it.

Mar 22, 2009 | Philips 55PW9363 55" Rear Projection...

1 Answer

Model 43FDX01B double vision with red ark across bottom . and no user manual.


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 10, 2008 | Hitachi FDX Series 43FDX10B 43" Rear...

1 Answer

Phillips 60" projection TV Double vision


This is a convergence problem and is either bad connections at the convergence ICs or defective ICs. If you can solder, you can repair this yourself. Let me know if you wish to repair this and I can provide you with additional details.

Dan

Aug 08, 2008 | Philips 60P8341 60" Rear Projection...

1 Answer

Philips rear projection tv prob


You need to replace the conversion ICs. Both of them.

Mar 09, 2008 | Projection Televisions

1 Answer

Tv screen waves and is double


No. You have bad convergence output ic;s and probably at least 1 burnt resistor. This liely will have to be reconvergec in the servcie menu after the aprts are changed.

Jul 12, 2007 | JVC AV-56WP30 56" Rear Projection...

1 Answer

Double vision


theunit needs convergence ic's

Mar 05, 2007 | Philips 43P8341 43" Rear Projection...

Not finding what you are looking for?
Philips 51PW9303 51" Rear Projection HDTV-Ready Television Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68427 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...