Question about Kenmore 40494 / 40495 / 40499 Electric Single Oven

1 Answer

Kenmore Electric Range Model 790.9092. After 9-hour power outage, unable to reset clock on control panel. It will light up the correct time, then go black. The manual states that the oven will not work correctly without the clock.The oven will heat and burners work. KC

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 3,053 Answers

Hello, krcondit2

I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my personal time to see if I can help. Even though this Informational site may not have your exact model or brand, this site will help you a lot. Here is a site link about everything you want to know about ovens and possibly yours, from
repair to trouble shooting it. Now go easy on me, I am just trying to help. If it does great if not, I am sorry.


http://home.howstuffworks.com/how-to-repair-an-oven.htm




Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help , I would appreciate it.

Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.

Thanks, Mike


http://beta.fixya.com/users/mc1bean

Posted on Oct 28, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wolf ovens getting err message after power outage


I had a Wolf 30F wall oven with a similar problem
after power outage. It wouldnt stop beeping with error message related
to temperature control. My solution was to turn power of at circuit
panel, then reset by pressing and holding the clear button for 5
seconds.

Also note: in my case I had to close the display
before switching the panel off. When I tried to the reset process with
the panel showing, it wouldn\'t reset.



To reset other
various parts of the control panel Instructions said:



Time-of-Day Clock

Immediately after the oven is installed, set
the 12-hour clock to the current time of day. It may need to be reset
after a prolonged power failure. The clock is visible on the control
panel during all modes. If the upper oven timer is set, the clock will
not be visible in the upper oven control panel display.



SETTING CLOCK

1) Touch CLOCK.

2) Touch number pads to
set current time of day.

3) Touch CLOCK or ENTER to start
clock.



24-HOUR CLOCK

The time-of-day clock can be
changed from a 12-hour clock to a 24-hour clock. After the clock has
been set, touch TEMPERATURE for three seconds, touch CLOCK, and then
touch ENTER. Follow the same sequence to change back to the standard
12-hour clock setting.



Fahrenheit to Celsius

The
oven can be changed from Fahrenheit (°F) temperature to Celsius
(°C).

Oct 26, 2012 | Wolf Range Ovens

1 Answer

Ge profile oven lock button won't go off


  • 1.Press the "Clear/Off" button on the control panel to reset the oven. This will clear the lock setting and unlock the door.

    2.Allow the oven to cool to room temperature to avoid turning the lock on again during this heating cycle.

    3.Reset the oven to the temperature you require to finish cooking by pressing the correct temperature control on the control pad.

    or

  • 1.If your GE Profile microwave won't turn on, unplug it, then plug it back in. A power outage may have occurred due to a power surge. Check your home's fuses and circuit breakers.

    2.Set the clock of your GE Profile microwave. Certain models will not operate until you set the clock. Select the "Clock" key and type in the correct time.

  • 3.Hold down your microwave's "Off" button. You may have accidentally hit the control-lock feature on your GE Profile microwave. Hold down the "Off" button for three seconds to turn the lock off.

  • 4.If the sensors of your GE Profile microwave are not working correctly, remove the food from the machine. If the sensors detect food-surface temperatures over 200 degrees Fahrenheit, it will not work properly until the area cools down.

  • 5.Contact GE Support if you are unable to resolve the issue on your own. Call the GE Support hotline or browse the help library on the GE website. You can also schedule a service visit on GE's website.

  • Nov 22, 2011 | GE Profile JK915 Electric Single Oven

    1 Answer

    My Kenmore Electric Range model 790.9661 seems to have a control board problem. Before replacing the $200 part, just wanted to make sure it was the problem. The clock works, but the oven temperature side...


    From your description it sounds that the board is the problem. I found the control panel you need for a lot less than $200 though.
    I found one online from a store that I have bought from many times. Part and shipping is about $153. They sell brand name stuff too and they have great service. I hope that this helped you.

    Control Panel

    Good Luck from a bored repair man!
    Joey
    http://www.pricedrightparts.com/products/Frigidaire-Control-Panel-316402715.html

    Jun 11, 2011 | Kenmore Ovens

    1 Answer

    I have a Kenmore Ultra Bake Stove, we had a power outage and neither the oven nor burners works. The code on top reads PF 5Ab. What can i do to reset the stove?


    PF is usually power failure.
    If "PF" appears at any other time, a power failure occurred. To remove "PF"and to reset the clock, press STOP/CLEAR.

    Unplug the unit for half an hour or so to see if it will reset.
    If not try to get into the diagnostics so you can see if there is a stored
    error code

    Feb 15, 2010 | Kenmore 40494 / 40495 / 40499 Electric...

    1 Answer

    My range is beeping f1 where the time should be


    HI. This will be a control fault. Possible touch pad issues detected. Use the procedure below to isolate the problem.

    1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so double check before continuing.
    2. Gain access inside the control panel.
    3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.
    4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.
    5. Turn the power back on.
    6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound).
    7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.


    Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not necessary. Simply replace the ERC (Clock).

    Jan 07, 2010 | Kenmore 40494 / 40495 / 40499 Electric...

    1 Answer

    The electric circuit breaker kicked off and when it was reset, we are unable to get anything with the oven to work. the time comes on at 12:00 and then it starts beeping and a f 1 light appears


    with kenmore F1 is a power failure in side the clock control
    your whole clock will need to be replaced
    go to www.appliancepartspros.com
    type in your model number and look in the control section

    Oct 20, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

    2 Answers

    Error message on Kenmore oven


    F-1 is not good. It basically means the EOC (electronic oven control is bad). There is a little test here for a little info:

    This simple test will help determine whether the ERC (Electronic Range Control or Clock) or the touch pad is defective when F1 error code is present.

    Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not necessary. Simply replace the ERC (Clock).

    Warning: If you feel in any way uncomfortable performing this test or making this repair, please contact a qualified appliance repair technician.

    1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing.
    2. Gain access inside the control panel.
    3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.
    4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.
    5. Turn the power back on.
    6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound).
    7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.

    Sep 04, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

    1 Answer

    Advantium zsc2001fss no power no lights


    I have same unit...power outage made unit come back on and it then requested user to set the clock, but the display shows the hours but won't accept the pushputton to lock it in. I had to look at the control panel today to see how hard it would be to replace.

    To take off the front vent panel: first take microwave out of the built-in space, disconnecting the power cord. Then the top outer metal skin can be unscrewed and removed, which exposes the screws that hold in the front top vent and the control panel in place.

    Feb 21, 2008 | GE ZSC2001FSS Advantium Electric Single...

    1 Answer

    Power outage issue


    You unit is stuck in the "Display Model Mode". Hold the stop/clear button for at lest five seconds in insure the interlock activates. If it does not activate then the electronic range control (erc) is not functioning. Replace the erc (Clock/Display.)

    Jan 10, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

    3 Answers

    Electric Kenmore Ultra Bake Oven


    I finally found my manual to the range, and to change from celsius to fahrenheit press the BROIL button for 5 seconds. A tone will sound, and the temperature should switch to Fahrenheit.

    As far as the code PF 5ab--it could be PF Sab which means the power went out during Sabbath mode. Try pressing and holding TIMER OFF for 5 seconds. If that doesn't work, then open the oven door, press STOP/CLEAR, press both the HOUR "up" and "down" arrow pad at the same time and hold for 5 seconds, "Sab OFF" should appear. Press START to accept the change, then close the oven door.

    Dec 13, 2007 | Kenmore 40494 / 40495 / 40499 Electric...

    Not finding what you are looking for?
    Kenmore 40494 / 40495 / 40499 Electric Single Oven Logo

    85 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kenmore Ovens Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Dan Webster
    Dan Webster

    Level 3 Expert

    8220 Answers

    Brad Brown

    Level 3 Expert

    16166 Answers

    Are you a Kenmore Oven Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...