Question about Broderbund PrintMaster Platinum Version 18

2 Answers

Print Master 18 on vista has problem----When printing and say you choose to have 10 copies, it doesn't stop at 10 but continues until paper is gone---what to do?

Posted by on

  • jncrawford Mar 13, 2011

    I can use this printmaster on my laptop with XP just fine but it never has printed the number of copies we need on my PC with Vista. We have to put the number of pages we need in paper tray to get it to stop printing when we wish.

  • jncrawford Mar 13, 2011

    Can't find the application box you're talking about

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,574 Answers

Run PrintMaster 18 in compatibility mode...Right click on the application-->selecting Properties from the menu-->Select the Compatibility tab

Print Master 18 on vista - jackpot00_2.png
choose to run the program in Windows XP compatibility mode

Posted on Mar 13, 2011

  • Reparatii PC - Service IT

    Also try to Run the application in Administrator Mode.
    Right click on PrintMaster 18 and select Run As Administrator.

  • Reparatii PC - Service IT

    Right click on printmaster 18 icon select properties-->click on Compatibility tab ->check "run this program in compatibility mode for" and select Windows XP ..

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,570 Answers

Does before it works fine that you can print exact number you try to print? If yes, try to run the SYSTEM RESTORE. Go to start>accessories>system tools>system restore and choose previous date that works fine to back to original setting.

Uninstalling and reinstall the program might help as well.

Please leave message if you need more help. I get back to you soon.

Posted on Mar 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Continuous jam paper feed cl3500n


I THINK THE NUMBERS BUTTON HAD PROBLEM, TRY TO CHANGE THE NUMBERS BOARD & SEE IF THE PATTERN STILL PERSIST. IF THE PATTERN PERSIST ALTHOUGH YOU INSERTED NEW NUMBER BOARD, THEN YOU HAS TO GO IN SP MODE TO CHANGE PRINT SETTING

Sep 26, 2013 | Ricoh Aficio SP-C210SF Printer

1 Answer

I have Print Master Platinum 10 and my Windows operating system is Windows 7 are they compatiable? I tried installing the program but it doesn't install. Is this program too old for this operating...


I don't think Printer Master Platinum 10 will run on Windows 7. However, solution #3 on this page (http://www.fixya.com/support/t2129564-printmaster_platinum_10_version_will_not) references how to make it run on Windows Vista. The same is true for Windows 7. You can run almost any software in compatibility mode. Since they're up to version 18, I doubt it will work with Windows 7.
Hope this helps.

May 29, 2011 | Broderbund PrintMaster Platinum

1 Answer

Printing from a computer, get paper jam, clear it, then the printing sarts over from zero again, so get too many copies. Any fix in the software? The counter on the machine doesn't operate when...


You can work this around by using a little manual labor. Whenever the paper jams and doesnt continue from previous page, you can unplug the printer from the electricity. (not just the on/off button). This way it loses the document that was printing from the memory. Then you can send the doc for printing again by designating which pages to print.
ex. if your document was stopped at the 12 pg and it has 20 pages.. go to print> and then choose which pages to print i.e. 13-20.
I hope this helps.

May 22, 2011 | toshibadirect.com

1 Answer

Power went off when I tried to print


Would be helpful to know which operating system you are using and whether there where any warning light flashing. For starters review the following solutions.
Printer Does Not Start or Stops During Print Jobs

Inner Cover was open when you started printing.

Close the Inner Cover and press the RESUME/CANCEL button on the printer. The printer resumes printing.

Inner Cover was opened while printing is in progress.

Close the Inner Cover and press the RESUME/CANCEL button on the printer.

A page of print data being sent at the time of the error will be erased, so print that page again.

The printer has been printing continuously over a long period.

If the printer has been printing continuously for a long time, the Print Head may overheat. To protect the Print Head, the printer may stop printing at a line break for a period of time and then resume printing.

In this case, interrupt your print session at a convenient time and turn the printer off for at least 15 minutes.

Additionally, if the printer has been printing graphics or photos with intense colors continuously over a period of time, the printer may stop printing to protect the Print Head. In this case, printing will not resume automatically. Turn the printer off for at least 15 minutes.

i_expl.gif Caution

The Print Head and the surrounding area can become extremely hot inside the printer. Never touch the Print Head or nearby components.

Out of paper.

Make sure that paper is loaded in the selected paper source.

Reload paper if no paper is found in the selected paper source (Auto Sheet Feeder or the Cassette).

If the same paper is loaded in the other paper source, you can switch the paper source with the Paper Feed Switch or the printer driver to continue printing.

If both paper sources have run out of paper, confirm the selected paper source and load paper there.

Printing documents with plenty of photographs or illustrations.

When the POWER lamp is flashing green, the printer or the computer is processing data. Printing large data such as photos or graphics takes time for the printer and the computer to process, during which the printer may appear to have stopped operating.

In addition, when printing data that uses a large amount of ink continuously on plain paper, the printer may pause temporarily. In either case, wait until the process is complete.

i_note.gif Note

If you are printing a document with a large printing area or printing multiple copies of a document, printing may pause to allow the ink to dry.

Dec 08, 2010 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

When I try to copy or print I get a "Out of paper"--"Load paper in main tray"-- The main tray is always loaded with at least 24 sheets of 8.5 x 11 sheets of printer paper. What can I do? Thank you


Hi,
Kindly reset the product.
Turn the printer OFF remove the power cord.
Wait 30 sec and plug the cord
Turn the printer ON
Remove all the papers before doing the above changes
See to it that you feed upto 10 or 25 sheets and not more.
  1. Open a document in the program being used to print.
  2. Click File , click Print , and then click Properties . The product Properties dialog box appears.
  3. Click the Paper/Quality tab.
  4. Choose the appropriate paper size from the Size is drop-down menu.
  5. Choose the appropriate paper type from the Type is drop-down menu.
  6. Click OK and then click OK again to print the document..
  7. If the issue is not resolved, continue with the next section.


Jan 30, 2010 | HP Photosmart 3310 Printer

1 Answer

The printer does not print. It feeds paper and


Visit HP support for this problem (XP):

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01853840&tmp_task=solveCategory&lc=en&dlc=en&cc=ca&lang=en&product=443024

If you have Vista, change query to read "Printer prints blank sheets of paper" > Choose Vista instead of XP

Dec 05, 2009 | HP Photosmart 8250 InkJet Printer

2 Answers

Will print test page but nothing else


i've had the same problem with the same printer. mostly it happens on my vista home premium laptop printing remotely to the printer which is connected to an xp home machine. i found that i need to stop and then start the print spooler. on either of these operating systems you can do this by right clicking on the My Computer (XP) or Computer (Vista) icon and choosing "Manage." Once Computer management is open, go to Services and look for Print spooler. Right Click on Print Spooler in the list. choose stop. wait for the print spooler to stop, then right click again and choose Start. That should clear your stuck deleting document.

Dec 04, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Brother MFC-8440 will not print or copy


YOU HAVE TO RESET.
TURN OFF THEN PRESS THE STOP /CLEAR BUTTOM THEN TURN ON KEEP PRESS ABOUT 10 SECOND THEN IT WORK .

Oct 15, 2008 | Brother MFC-8440 All-In-One Laser Printer

1 Answer

I am fairly new to PCs. I recently purchased a Toshiba 205 and have Vista SP1.  I purchase Print Shop Delux 22 and started the installation process before I read the statement about don't start...


Hello, Encore Software has released a patch to make Print Shop Deluxe 22 compatible on Windows Vista.

Here is what they say here:

http://support.encoreusa.com/kb.asp?id=571

Problem I am looking for the Vista compatibility patch. Solution This Windows® Vista update will detect and repair The Print Shop® 22 and PrintMaster® 17 applications already installed on your computer. After applying this update The Print Shop® 22 and PrintMaster® 17 will operate normally on computers running Windows® Vista.

Update Instructions
1. Click the link located at the bottom of this page.
Note: For Microsoft® Internet Explorer® the File download dialog may appear. Select Save this program to disk and click OK.

2. Choose a location (e.g., the Desktop) and click Save. The download process will begin.

3. When the download is complete, close the Download window.

4. Locate and double-click the Broderbund_Print_Update.exe file that was downloaded to begin installing the update.

5. Follow the onscreen instructions to complete the installation.
Note: Depending on system or user account settings, you may encounter several interruptions during the installation process. If so, please click Continue or Allow in order to proceed.

6. Launch and use The PrintShop® 22 or PrintMaster® 17.


Click here to download Broderbund_Print_Update.exe (26.7 MB)

Aug 21, 2008 | Computers & Internet

1 Answer

Not printing on last copy


My guess is it?s probably the print head. These things are designed to print on single sheets so even though it?s probably well within specs it still doesn?t have enough force to push an image to the last page. Less likely but never the less a possibility this could also be caused by inconsistent paper in the two boxes. Continuous feed, multi-part forms in a box are made by several manufacturers and have different characteristics. -You might try flipping the box of forms from the printer that works to the one that doesn?t just to make sure it?s not the forms. When I used to use multipart forms we would place orders for several boxes of the same form and occasionally some would be from a different manufacturer. The paper looked the same but the characteristics were way different. By the way we tried to do four-part but could never print beyond three part forms. Our fix was that we decided we only needed one in-house copy. -If the problem doesn?t follow the paper then I would suspect the print head. Panasonic print heads are fairly easy to replace and fairly inexpensive so I would try changing it out. With a lot of use the print heads do wear out so even if this doesn?t solve this problem you?ll have a spare when your vertical characters start looking wavy?. Let us know if you have any other questions and please don?t forget to rate this post.

Feb 14, 2007 | Panasonic KX-P2023 Matrix Printer

Not finding what you are looking for?
Broderbund PrintMaster Platinum Version 18 Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Broderbund Computers & Internet Experts

Cindy Wells

Level 3 Expert

5052 Answers

Martin Murray

Level 3 Expert

1623 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a Broderbund Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...