Question about Washing Machines

1 Answer

A key is showing on the display of the washing machine and i cant get it to respond to anything and i cant work out how to remove the key

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,277 Answers

Hi from retired Englishman in SW France,

The key symbol probably indicates there is a problem with the door lock unless it is at the end of a wash (?). Either the locking solenoid or the door lock sensor is malfunctioning and requires attention. Sorry- Service call!
John C

Posted on Mar 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What needs to be done to respond to display of a key image?


that means it's locked. Enter the unlock code.

May 10, 2015 | Bosch Washing Machines

1 Answer

Machine will not start. Showing key symbol and beeping.


Child lock is on. Press and hold the child lock on the user interface for 5 seconds.

Dec 15, 2014 | Bosch Washing Machines

1 Answer

Maytag 3000 series


Difficult to answer without more information. Would be nice if you could remove the panel on which the screen is located and try to make sure that the wire harnesses to the board has not come loose.
You have already tried 'unplugging for ten minutes.'
Make sure the power outlet is 124V, appx. Plug in a toaster and see how it works.
If the board wont respond, you may need service help.
If not too old, call tech help of your supplier/manufacturer.

Oct 19, 2013 | Dryers

1 Answer

Cant run video plug-in not responding


Video Plug-IN? Are you saying there is no display on the lcd screen?

Shine a flashlight on the dark screen to see if you barelysee the icons on the desktop. If so, then the LCD Inverter is bad.

Plug in an external monitor and see if the display shows up on it. It can beany kind of monitor even the old big fat crt monitors as long as it has a vgacable to connect to your computer's vga port. If so that proves yourvideo card is ok. The video will show on most systems when you rebootwithout you having to do anything. Some systems will require you to hit the FN(Function key) + F1 thru F12. Hold down the FN key then hit the correctkey for displaying on the monitor (F1 thru F12). The correct key willnormally have CRT/LCD on it or it will have the icon of a display.

If you see no icons by shinning a flash light and the external monitor works,then your screen is bad. If you see no icons by shinning the flash lightand nothing shows on the external monitor, then most likely your video card isbad.

May 06, 2012 | Computers & Internet

1 Answer

My panasonic kx-fl501 fax message says please wait and the keys don't work


I realize this thread is old, but I just encountered the same problem with my Panasonic KX-FL501. Pressing #9000* does not work, as none of the key pads are responding. When I lift the receiver I get a tone. But the keys don't respond when I dial. Display shows "please wait"..... I've been waiting for hours.

Feb 08, 2012 | Panasonic KX-FL501 Plain Paper Laser Fax

1 Answer

My son has been pressing buttons and now there is a key symbol showing and i cant resume the cycle?


Press and hold the Start key for 4 seconds until the key symbol disappears from the display. You will then be able to use the machine.

Oct 18, 2009 | Bosch Washing Machines

1 Answer

Kenmore elite calypso doesn't respond to buttons except cancel


I've had a similiar problem on my calypso. In my case the key pad would go dead after washing or pushing stop after a few minutes. If I unpluged the unit for a few minutes it would work again. This would appear to be in the controller board. I removed the board and inspected it finding no problems. After re-installing the board the washer appears to be working again. My conclusion is that there is a loose connector/connection. I'd suggest you remove and re-install all the connectors on the controller board. This is the board closest to the power chord.

Good Luck, George S.

Sep 10, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Washer no working - KEY SIGN SHOWS ON DISPLAY


child lock is activated check handbook for info on disarming usually have too hold a button for 4 secs or more different on different models so cant be more specific hope this helps

Aug 05, 2009 | Bosch Classixx WFL 2066 Front Load Washer

3 Answers

CL on display panel - washing machine will not respond


CL stands for child lock to take it off press and hold TEMP and TIME DELAY at the same time and this should remove it

Dec 11, 2007 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...