Question about Computers & Internet

1 Answer

My laptop has a booting problem - Computers & Internet

Posted by on

  • Dusitn Burris Mar 13, 2011

    Where does the problem occur when booting, and what is the error that you are receiving?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 89 Answers

1.Disconnect all external devices (printers, USB hubs, USB drives, etc...) and then boot up. If this corrects the issue then add the devices back one at a time until you discover the piece of hardware causing the issue. Then get any updated drivers\software for the device.

2. Use the"Last known good configuration" from the Windows Advanced Options menu.
If this option resolves the issue then look for any updates or software installs that may have caused the problem.

3. Boot to Safe Mode from the Windows Advanced Options menu.
If you can get into safe mode then the issue could be driver or software related.
From within Safe Mode run a System Restore.
4. Perform a Clean Boot.

Posted on Mar 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I add Boot devices to Boot Menu on Acer V5-122P which only shows the internal HDD


Because this is one of the thin client laptops all you have in the laptop is a Hard drive. and other boot device is a USB device that you plug in. As such the bios will not show it until it is plugged in and then you can select it to boot from.

Feb 10, 2015 | Acer Aspire V5-122P-0864 11.6" Touch...

1 Answer

Laptop acer


Itu menunjukkan yang laptop kamu boot menerusi rangkaian.
Kamu harus tukar pilihan boot dalam "BIOS setup" dan pastikan Hardisk ditempatkan pada boot yang pertama. Selamat mencuba.
______________________________________________________
It looks like the laptop is trying to boot on network,
you need to enter the bios setup and make sure the hardisk is assigned as 1st boot. Good Luck.. :)

Oct 30, 2013 | Lenovo ThinkPad T41 Notebook

1 Answer

Laptop won't boot


Computer does not boot upThe problem maybe the RAM, it is faulty or just needsreseating to make proper electrical contact.
Reseat the RAM and then boot up your laptop. If it still does not boot up thenremove the RAM module/s and take them to your friendly computer repair shop andget them to test the RAM for you.

May 20, 2012 | Gateway Computers & Internet

1 Answer

My tosshiba satellite A665-55186 wont go in to windows boot, what can i do??


Just like other computers, your Toshiba laptop may start failing to boot the operating system completely, or may fail to boot up at all. Boot problems are caused by virus infections and issues related to hardware and software. With the proper troubleshooting techniques, boot problems can be remedied to get the laptop into good working condition.

1. Perform initial hardware checks. Ensure that the laptop has enough battery life to boot up. Charge the laptop using its AC adapter and then try to boot the laptop again. If nothing happens, plug the AC adapter into another power outlet. If this does not help, check to see if external drives (flash drive, external hard drive, etc.) are connected into one of your USB ports. Unplug it from the laptop and press the laptop's power button. If the laptop powers on but fails to load the operating system, proceed to the next step.

2. Ensure that the hard disk is not disabled in the boot sequence in your BIOS. Otherwise, the laptop will fail to fully boot the operating system. Reboot the computer and press a key that will lead you to the BIOS page. Set your hard disk as your "first boot priority," or first in the "boot sequence." Note that the steps on loading the BIOS as well as navigating throughout the BIOS pages will depend on what brand of BIOS is installed in your laptop.

3. Choose boot to the "Last known good configuration" if you get an error page before the operating system boots up. If after choosing this option the computer reboots again, choose "Start Windows Normally," if this is in the list of options.

4. Consider repairing or reinstalling the operating system if the computer still fails to boot after the steps above. Repairing the operating system will retain your current data and settings. Reinstalling the operating system means reformatting or deleting all data in your computer and installing a fresh copy of the operating system.

I hope you find it very helpful. Best regards from fixya

Aug 15, 2011 | Toshiba Satellite A660 Series Notebook

1 Answer

I have an ibm t21...it booting to: invalid boot.ini file...booting from C:\winnt\ ntdetect failed.......................will not boot from here. can you help? i have a 'product recovery CD-Rom that came...


our user manual for the laptop should show a feature to boot from the cd or it usually on the laptop it self ( a function key ) that will let you boot from the CD.
Go here/ follow the recovery instruction / save to flash drive .
print out if needed .

here is the site instruction set:

copy/paste into URL or the address locator in browser.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4UFUYK

Aug 11, 2010 | IBM ThinkPad T23 2647 Notebook

1 Answer

I have laptop (lenovo E260) this laptop has problem in booting it does not make boot from CD also it has no USB boot so what can I do to fix this problem? It needs format because it does not work


Boot up the laptop and enter into your BIOS. You can do this by pressing F2 at startup. From there select the boot tab and rearrange the boot menu order placing the disc drive to be the first to boot from. Then save changes and exit. You can also select boot from external media (USB boot) and place it in the order you desire such as after CD but before hard drive. Then insert your recovery CD and upon boot it should prompt you to press any key to boot from CD.

Jan 07, 2010 | Lenovo ThinkPad R51

1 Answer

Please tell me how to boot the Windows XP by using USB drive


You have to press F2 or Del while booting to enter BIOS..THEN in boot device priority change first boot device as usb disk..

Dec 14, 2008 | Dell Latitude D610 Laptop Computer -...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...