Question about Hotpoint First Edition FEW12 Front Load Washer

1 Answer

When i switch my washing machine on it trips the elrctricity

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 1,525 Answers

Hello theres a bad earth on the washer could be number of things. 1 the interlock on the door 2 circuit board fault 3 motor gone down to ground 4 bear wire touching the metal part of the washer. you will some 1 with an insulation tester to do a test also with power off check the plug socket for loose wires and the washer lead for splits or loose connecton hope it helps

regards
shaun

Posted on Mar 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, i go into the test mode and it starts on 18 and when it gets to 14 the house electricity power trips off.Any idea what part do i need to replace?


How can I figure out why my washing machine is tripping the ...

diy.stackexchange.com/.../how-can-i-figure-out-why-my-washing-machi...
Aug 17, 2012 - 110.24872300) washing machine which up to this point has been ...Note what is happening when it trips (is it starting to spin, starting to drain, filling, etc.).... If the outlet trips when the washing machine isn't running and isn't ...

Washing machine tripping RCD « Singletrack Forum

singletrackworld.com/forum/topic/washing-machine-tripping-rcd
Switching on the plug socket that the washing machine's plugged into caused no problems, but switching the machine itself on trips the RCD. ... then its possibly the water fill solenoid as most cycles start with a water fill. ... I've always guessed it is theelectricity/water combo somewhere in the machine so err on the side of ...

Nov 29, 2015 | Washing Machines

1 Answer

Trip switch cuts out when i use washing machine


Main board power circuit fault.disconnect main PCB and reconnect power cable .you can identify the fault. Replace main pcb.

Sep 01, 2014 | Indesit Washing Machines

1 Answer

My washing machine it tripping the mains board out, changes plugs and sockets and its still doing it - any ideas? perhaps the bushes?


sounds like water is getting into the electrics....or your trip circuit has became week...try switching the trip switch from another circuit.

Jul 21, 2010 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Zanussi jet stream iz16s tripping ouy rcd once filled up with


Hello,
It would seem to me that the heating element needs replacing from the information you have supplied especially as it performs most of the other functions like filling and spin and drain.
Good luck

Mar 17, 2010 | Washing Machines

1 Answer

Hotpoint 9537 washing machine tripping electric


You have a problem with Live feed shorting to earth on a main component. You need to switch off machine and seek a qualified electrician ASAP

Sep 03, 2009 | Washing Machines

1 Answer

Washing machine


the problem you are have there is if the machine is bolwing a fuse becauce the heater element is falty replace the heater and all shall be fine again noffie....

Apr 05, 2008 | Indesit W 123 Front Load Washer

3 Answers

Hoover CA230 1300 Special Edition Washing Machine


Should you have to use un due force to get the filter undone on the Hoover 1300 special deition washing machine

Jan 14, 2008 | GE S8000E

Not finding what you are looking for?
Hotpoint First Edition FEW12 Front Load Washer Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

freddyfox

Level 2 Expert

236 Answers

ptpumpman

Level 3 Expert

407 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...