Question about Computers & Internet

2 Answers

My compaq presario sr1000 computor won't stop beeping from the inside and it says no signal on the monitor

Posted by Anonymous on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Great advice. removed one of the ram modules and pc started first time.

Posted on Mar 20, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

1 short beep and 1 long beep means its a memory problem.
Shut down your computer, then open your computer case and replace the memory module.If you have 2 or more modules ,try starting the pc with one.If it fails, try a different single module.

2 short beeps and 1 long beep repeating for 5 times means its a graphics card issue.
Shut down your computer, then open your computer case and unplug the graphics card, then plug it again.If this doesn't help, try with a different(confirmed working) graphics card.

Posted on Mar 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do the power supply plugs go on the inside of a compaq presario sr1000


WATCH OUT FOR ELECTRIC POWER.YOU HAVE TO BE MOORE SPECIFIC.

Jun 10, 2013 | Computers & Internet

1 Answer

Compaq presario beeps 3 times, won't boot


3 Beeps is usually a RAM issue. Try re-seating your RAM in their slots and rebooting.

Feb 05, 2012 | HP Compaq Presario SR5262NX Desktop PC

1 Answer

I have an Compaq Persario SR1000. When switching on it will only display a "No Input signal" on the monitor. I have tried pluging in a separate video card but still get the same message. Any ideas what the...


Well if you have tried it on two units, and it says the same thing."No Input signal" then, the unit has gone faulty and it cannot "Lock" onto the synchronization pulses coming from the Video card in the PC. This is a very common fault, often it is the power supply, or faulty capacitors, or the driver.

May 24, 2010 | Compaq Presario SR1000T (568657) PC...

1 Answer

I have an old 2005 compaq presario SR1000. I also have a Dell flat panel 1704FPT. I have tried hooking it up to the compaq tower and it will come on for a few seconds then a message will show saying that...


Bring up the monitor menu. There should be a button on the monitor itself. Find the signal input, change from analog to digital (DVI-D). That should take care of it.

Jan 28, 2010 | Compaq Presario SR1000T (568657) PC...

1 Answer

I have a sr1000 compaq presario, i did a system recorvery, every thing checked out ok, but it will not open microsoft windows, it stays in a please wait mode, also would another type of monitor make a...


Your windows file has been corrupted what you gotta do is to format the drive in which you stored windows files.and then re install windows again.
It will work fine..

Jan 26, 2010 | Compaq Presario SR1000T (568657) PC...

1 Answer

Compaq Presario SR1000


Unless compaq displays that message when the computer goes into sleep mode, it could be a virus.

Nov 09, 2008 | Computers & Internet

2 Answers

Compaq Presario SR1000 desktop boot up problem


nothing to do with the ram ... this motherboard sometimes locks, ( dont ask me why) but if you take out the power cord for 5-10 minutes and then press and hold the front power button on the machine (about 10 seconds) it will reset the board. Plug in the power cord and the basic items, sound, video etc ( some usb devices tend to stop it booting to) boot into windows. Then add the rest of your usb devices ..

Mar 23, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...