Question about Exercise & Fitness

2 Answers

I have a Sportcraft TX 390. My husband has figured out the problem, I need another electronic board. Where can I order another one?

Posted by on

  • 1 more comment 
  • coastalstorm Mar 13, 2011

    Hi the Name of treadmill is

    Sportcraft TX 390

    model# 3-1-04-039F FH

    serial # CEB 05012186

    Hopefully this helps

    Thanks so much

    Robin

  • coastalstorm Mar 13, 2011

    Hi

    Here is the Model # from the front of the cover down by the on/off switch

    Model# 04039

    Thanks again

    Robin

  • coastalstorm Mar 14, 2011

    Great..thanks

    I had already spotted those websites online yesterday. I am going to phone the company tomorrow and see what they can do...if it is nothing..then i guess I'll have to buy another treadmil...

    Thanks for trying to help.

    Robin

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 17,970 Answers

You have a short in the motor control board? Unfortunately Sportcraft went out of business and I have no supplier to give you for the replacement.


Could try in this sites:

- http://www.fitnessrepairparts.com/brand/View/67/SportCraft

- http://www.healthandfitnesshelp.net/equipment/where-to-find-sport-craft-treadmill-replacement-parts/


Hope helps.

Posted on Mar 13, 2011

  • ZJ Limited
    ZJ Limited Mar 14, 2011

    OK, I hope that you found answer in this sites and assist phone number. Keep in touch.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 271 Answers

Can you give me the complete brand and model#?.

Posted on Mar 13, 2011

  • Android Man
    Android Man Mar 13, 2011

    ok, are you getting the model from the label at the frame or only from the hood. in order to get parts from website I need the model from the label at the frame usualy at front or side.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a console-mother bo9ard for a Sportcraft TX 420 treadmill?


Assuming it is not a beanbag chair/treadmill, I suggest contcting Sportcraft directly for their input on where to obtain the board.

Jul 10, 2014 | Sportcraft Furniture

1 Answer

Need to order a control board


I am not sure they carry these boards but most certainly worth a call is Allied Electronics. If they don't have one I know they will steer you the right direction.

May 14, 2014 | Sportcraft Tx350 Treadmill Motor Speed...

1 Answer

The threadmill stops when i step on the decke. Why?


1) this hapeen has a protection to the electronic system, the machine keep safe the electronic soft and hardware.producing a shut down.
Lube the DECK BELT, inmediately.

2) LUBE the rollers bearing too very well

3) TEST the input voltage motor, if there are the motor need repair.

4) Test the output voltage board, for input voltage motor, if there are NOT the board is faulty.

God bless you
9_4_2012_12_32_59_pm.gif

Sep 03, 2012 | Sportcraft Tx 4.9 Model 4041 B Walking...

1 Answer

I need the assembly instructions for a sportscraft basketball hoop


Request instructions from Sportcraft. Note spelling of Sportcraft.

Aug 05, 2012 | Sportcraft Arcade Hoops With Electronic...

1 Answer

I have a sportcraft tx 2.5 and was cleaning it and some water got into the housing where the motor and circuit board is located. Now all I get is the number 7 on the display and it won't run.


Dear Sir:

1) Please unplug the machine
2) Put with air gum machine, and pass in all board and circuit for heating.NOT OVERHEATING.
3) Wait for 24 hours. if you have some infrared lamps, will be better.NOT OVER EXPOSED.
4) Turn ON the machine, and proof, if the problem remain, the board is faulty. and replace.
5) However try to RUN the software calibration for better diagnose, troubleshooting, and fix it. see the block diagram attached.
God bless you
6_10_2012_12_47_33_pm.gif

Jun 09, 2012 | Sportcraft Tx2.5 Tx 2.5 Treadmill Motor...

1 Answer

My sport craft arcade hoops with electronic score board is not turning on


I have problem with Sportcraft basketball arcade hoops control box. When I press on buttons on, play, up and down, some it responds, but most of the time it is not responding. Where do I get the control box list, diagram, and where to buy toggle switch?
Thanks,

May 27, 2012 | Sportcraft Arcade Hoops With Electronic...

1 Answer

My Sportcraft TX-400 Treadmill shuts off after 7 seconds


Dear sIR:
This by lack of LUBE, in your schedule maintenance DECK BELT. maybe the belt is worn.
2) Lube the roller bearing.
3) Align the belt see the diagrams
4) Test the input voltage motor, if there are voltage motor, the motor need repair.
5) Test the output voltage board, for input voltage motor, if there are NOT the board is faulty.
Now you can RUN the software calibration for diagnose, troubleshooting. See my personal TIPS for HELPs too.

sincerely. God bless you
5_7_2012_12_41_57_pm.gif5_7_2012_12_42_19_pm.gif

May 06, 2012 | Sportcraft TX 400 Walking Belt

2 Answers

Sportcraft


Last time Arcade Hoops replacement parts I bought from amazon. Take a look on this link Amazon com Arcade Hoops replacement. I hope this was helpful. cheers

Mar 13, 2012 | Sportcraft Arcade Hoops With Electronic...

1 Answer

What transformer will work on sportcraft electronic dartboard


The Sportcraft dartboard transformer that I have shows the following data:Model No: D9 - 10Input: 120V 60Hz 25WOutput: 9VDC 800mAHope that helps

Jan 22, 2012 | Sportcraft Multiple Lighted Electronic...

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

658 people viewed this question

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

914 Answers

Tom Chichester

Level 3 Expert

33322 Answers

Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...