Question about Canon PIXMA iP1800 InkJet Photo Printer

3 Answers

My installation software cd is damaged and i can not install my printer

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 287 Answers

Hello thanks for using Fixya
With non availability of installer cd just download its driver, You will surely make able to communicate your printer with computer.You can easily & free download the driver of Canon Pixma iP 1800 Inkjet Printer

After open it, Follow the given Installation Instructions: Download the version of the driver that corresponds to your operating system by clicking on the appropriate link above. A window should then show up asking you where you would like to save the file. Save the driver file somewhere on your computer where you will be easily able to find it, such as your desktop.Now Go to the location where you saved the file and double click on the file. Then simply follow the on-screen instructions for installing the driver. Further assistance i am here to help

Please don't forget to click on Four thumbs which are given below if it is helpful
THANKS & Keep Using Fixya

Posted on Mar 12, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 173 Answers

Hey there,
You can find the drivers etc from this website: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1800#DriversAndSoftware
Simply click to select your operating system (OS), and then you can download the files and install.
Hope this helps! If it did, feel free to rate me. Thanks for using FixYa.

Posted on Mar 12, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 310 Answers

You find a free driver in www.canon.com. If a have been usefut please give me a vote :)

Posted on Mar 12, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i install and connect my cd for my printer, coz my cd player disc of my cpu is damaged


In this case, you could download the software for your printer from its manufacturer website and run installation from the obtained file(s).

Aug 13, 2011 | Targus Computers & Internet

Tip

How to install a printer without the install cd.


You lost, broke or damaged your installation cd for your printer and the software is corrupt and needs reinstalled or you want to hook it to a different computer. What should you do?

You can install a printer without the cd.

First connect the printer to the USB port if that is how it hooks up, this is the most common hookup. Power the printer on. Give the computer, which should already be running, some time to recognize the printer. It will ask for the disk (cd) or if you want to browse for it. Cancel the setup at this time.

Google your printers brand. Go to the company web site. You should see a link to 'drivers and downloads' click on this. A page will open usually with a search engine. Input your model. You should be presented with software for your model printer to download. Follow the instructions and download the software to your desktop.

When done close the internet and click on the software you just downloaded. It should start an install. Follow the instructions and install the software. Reboot your computer and go to the printer setup. Find your printer and open the maintenance menu. You should be able to do a test print at this point. If your printer prints a test page you are done.

I would save the downloaded software to a file which you can easily recognize and burn it on a cd.

Thanks for using FixYa and for the great rating.

hardrocko

on Oct 11, 2010 | Office Equipment & Supplies

1 Answer

I need an installation cd for my 1410v printer scanner and copier my installation disk is damage


You can download all the CD software from the HP site in -> SUPPORT -> DOWNLOAD -> etc... just enter the model number of your printer and your all set...

Cheers!

Jan 12, 2011 | HP PSC 1410v All-in-One Printer

1 Answer

I could not connect the printer but I have the CD driver. There is a problem when i try to install the dhe driver. The scanner is Ok without any problem.


A damaged CD, check for scratches or dirty stains, to be wiped clean before reinstallation. Check the Disk driver for malfunction by trying another functioning CD in driver. The printer would hardly function the installation CD installed. meanwhile check on the acquiring software drivers on the website of the printer manufacturer. examples, www.microsoft.com should provide compartible codes to priter repairs.

Dec 21, 2010 | Computers & Internet

1 Answer

Cannot open Solution Center. HP does not recognized its opwn product


1).You might have the software CD supplied by the HP along with the printer you purchased, Please try to re-instal the software by using the supplied CD. If you try to instal the software again , a message will prompt you to reinstall or repair the already installed software. So, you must mark tick mark agasinst the repair and incert the CD in the CD Drive of your conputer which was supplied by the HP.Your problem will be solved automatically.i.e. your printer will be recognised by your computer. If your computer failed to recognise your printer , even though HP software was reinstalled, try to solve your problem with the following solution.

2).Kindly check the power cable. It may have damaged. So please try to contact 'HP authorised service center' in your area. They may check the cables attached to your printer and if they were damaged you may purchase the power cable from them for nearly Rs.600/-. If you are having warranty , the power cable may be supplied by the 'HP authorised service center, free of cost. Hence , I think your problem may be solved permanently.
But, don't try to purchase the power cable at any sales counter.

Sep 27, 2010 | HP Computers & Internet

1 Answer

Where can I get an installation CD for my X6100


Go to the lexmark site and download the software. You can put it on your computer directly and once you have it you can burn it to disk if you want.

Nov 08, 2009 | Lexmark X6100 Flatbed Scanner

2 Answers

Setup CD-ROM damage


drivers can be download from:

http://software.canon-europe.com/products/0010170.asp

Dec 19, 2008 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Officejet4315v all-in-one cd is damaged. can't install software need website to go to so i can download soft ware


Hi, try updating your printer drivers:

Create a new folder on your desktop and name it newhpdrivers(substitute your manufacturer in new name). Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop. Power down your computer. Reconnect the printer to the computer and turn printer on. Power on pc. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done


anaanymous

Oct 13, 2008 | HP Office Equipment & Supplies

Not finding what you are looking for?
Canon PIXMA  iP1800 InkJet Photo Printer Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1992 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...