Question about Computers & Internet

2 Answers

Kids put wrong bios password three time the shutdown not even power come to computer

Posted by on

  • Hi,
    Bios problems are the worse... do you have a laptop or a desktop computer?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Hi, how do u do?? You should check 2 part in your motherboard. Do these steps:
1. unplug your computer
2. open the case.
3. check the cable that come from the front of the case, and make sure that connected to motherboard. (where the power on button placed)
4. then remove the motherboard battey and wait 45 min. (the computer must be unpluged) (u cand use this video tutorial for removing the battery)
5. put the battery.
6. plug ther computer and power on.
it should work properly.
have fun.
Bye

Posted on Mar 12, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

There are a few different ways to resolve this issue
1. Call the manufacturer and ask if they have a reset or a way to get the password

2. Look in the manual and see if your laptop has a jumper setting that will reset the bio (including the password)

3. Just go to the manufacturers website and get the latest bios update and flash the bios

4. Remove the cmos battery leave it out for literally a week (7days) then replace it (best if the computeris off this entire time)- this way it forgets whats saved in the bios

Posted on Mar 12, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Toshiba Satellite and my kid entered my bios password wrong too many times and now it won't even come on! Help what do I do?


Remove the battery along with the cmos battery for about two hours to see if that clears up the cmos. If that does not do it then the bios is corrupted and you need to go shopping.

Jan 28, 2017 | Toshiba Computers & Internet

1 Answer

My hp 2000 laptop reads enter administrator password or power on password with a system disabled code 86632955


Try this Hope it works.5 to 8 character code on System Disabled screen

Laptop password system disabled codeAs the computer is booting, press F1, F2, or Del to enter CMOS setup.
In the CMOS setup, when prompted for a password, guess three times until you're giving the code. If, after entering the wrong password three times, the computer is displaying a 5 to 8 code, as shown in the picture, continue to the next step.
Write down the code and visit Dogbert's BIOS Password Backdoors scripts page to download Python and the free Python scripts to clear many of these types of passwords.

Dec 13, 2016 | HP Computers & Internet

1 Answer

I forget bios password for HP DL160 G6 server, how do i reset the password ?


  1. Shutdown your server.
  2. Go inside the server, and remove the CMOS battery. It should look like this.

4_15_2013_11_35_12_pm.jpg

3. Be sure to power down your server before taking it out. Be aware that once you take this out the system will forget a lot of it's time settings. This is the battery that keeps the computer's memory of time, date, and BIOS password when it's shutdown.

Apr 14, 2013 | HEWLETT-PACKARD HP ProLiant DL160 G6...

2 Answers

I tried to turn off my fingerprint security from acer travelmate 7730 laptop and now it started ask bios password. I dont know the password(never set it) three times wrong and system disabled and numb


hello try to connect the Acer support or search on Google for bios password. A lot of computer the come with a same bois password that company put on it. For example your Model is Acer may be the Company put Acer password for it . Even if you remove the bois battery from the motherboard and you see same thing again i think you will have to take it to Acer Branch the only help it their. i tried to find the password for you put can't find it. Please rate my comment thanks

Nov 21, 2011 | Acer Computers & Internet

1 Answer

What te bios password for emachine. I want to enable my ethannet which in BIOS set up. But I do not now the password of BIOS. I have not set up myself.


How to reset you bios password.

Step 1: Power off you computer and unplug power cable.

Step 2: Open the computer case so that you can see the motherboard.

Step 3: Find the 3 pin jumper on your motherboard and put it on the other pin. Ex: If it is on 2 and 3 you will want to put it on 1 and 2.


helpdeskman_0.jpg
Step 4: Plug your power cable back into you computer and turn it on. (Note: Your computer will not load you operating system.)

Step 5: Shutdown your computer and unplug it again.

Step 6: Put the jumper back into it original position.

Step 7: Plug your power cable back in and turn your computer on.

Now you bios password should be reset.

To enter the bios press the the F2 or Del key when your computer is turning on. (Note: This varies for different manufacturers.)

I hope that this helps you!
HelpDeskMan

May 21, 2011 | E-Machines T3418 PC Desktop

1 Answer

Acer aspire IE3450P BIOS Password


A BIOS password is a protection measure that can be used to stop someone powering up a computer system or making changes in some of the computers most sensitive areas. Many big name computer manufacturers such as Dell and HP lock the customers out of this area because they don’t want the customer changing anything and potentially damaging the machine (which the manufacturer may have to warranty). However, when someone like a computer technician or hardware enthusiast needs to make some hardware changes to the computer, they will need to access the BIOS. Here are some methods to bypass or remove a BIOS password.

NOTE: Do not try to guess the password on a pass worded Hard Drive. 3 wrong guesses will often result in the information on the hard drive being lost forever.
How to Bypass or Remove a BIOS Password by Removing the CMOS Battery:
The simplest way to remove a BIOS password is to simply remove the CMOS battery. A computer will remember its settings and keep the time even when it is turned off and unplugged because these parts are powered by small battery inside the computer called a CMOS battery. If we pull out this battery, the computer will forget a lot of its hardware settings, including its BIOS password. This should not be performed on Laptops if you are not experienced working with laptop hardware.
remove-battery.thumbnail.jpgAnyway, open up the computer case using a screw driver and locate the flat, circular and metallic CMOS battery. It should look something like the picture to the right. Some computers have this part standing upright.
Once you have located it, observe how the latches are holding it. There are many different ways to remove a CMOS battery but the most common way on newer computers can be seen in the picture below.
remove-bios-battery.thumbnail.jpg Make sure to power down the computer, unplug the power cables and unplug any USB devices if they are powered. The computer must not be able to get power from anywhere for this to work. Take out the CMOS battery and wait 10 – 25 minutes before putting it back in. The reason for this wait is because the computer can still store power in its capacitors even though everything is unplugged. The waiting period allows enough time for them to discharge.
Plug everything back in, power up the computer and enter the BIOS again. If everything went well there should be no more password. In some cases, if you get weird error messages during boot up now, you will need to go to “Load BIOS Defaults” in BIOS and save the changes to fix them.


Please rate me if this solution works for you

Thanks......Have a great time.


Jul 19, 2010 | Acer Computers & Internet

1 Answer

Phoenix bios setup utility is requesting a password


Actually, if you do not know the password it is best not to guess because 3 wrong guesses would result to losing the data on your hard drive forever.

the simplest way to remove a bios setup utility password is by removing the cmos battery. computer will remember its settings and keep the time even when it is turned off and unplugged because these parts are powered by small battery inside the computer called a CMOS battery. If we pull out this battery, the computer will forget alot of its hardware settings, including its BIOS password. This should not be performed on Laptops if you are not experienced working with laptop hardware.

1. open up the computer case using a screw driver and locate the flat, circular and metallic CMOS battery. please refer to the picture below. Some computers have this part standing upright.


9b1e193.jpg
Once you have located it, observe how the latches are holding it. There are many different ways to remove a CMOS battery but the most common way on newer computers can be seen in the picture below.

2. Make sure to power down the computer, unplug the power cables and unplug any USB devices if they are powered. The computer must not be able to get power from anywhere for this to work. Take out the CMOS battery and wait 10 – 25 minutes before putting it back in. The reason for this wait is because the computer can still store power in its capacitors even though everything is unplugged. The waiting period allows enough time for them to discharge.

3. Plug everything back in, power up the computer and enter the BIOS again. If everything went well there should be no more password. In some cases, if you get weird error messages during bootup now, you will need to goto “Load BIOS Defaults” in BIOS and save the changes to fix them.

Apr 13, 2010 | Computers & Internet

3 Answers

Power-on password forgotten! How can the computer be started?


The Power on Password is set from the BIOS configuration. Ask that person who borrowed your Compaq for the password. Once you have this password, you can enter the BIOS configuration and remove/disable this password.
Depending how old you Compaq is, removing the BIOS battery and main battery for 15+ mins may remove this password and restore the BIOS to the factory default (insert both batteries again) and configure the BIOS Date and Time etc.
BUT if the the password is stored on an EEPROM chip then removing will not fix this problem. There are no backdoor passwords available.

Nov 19, 2009 | HP Compaq nx6110 PC Laptop

1 Answer

The computer comes no with password


The new mpc support site is back online at http://www.mpcdrivers.com
Mpc notebooks have a bios password ability. Once that password is set, you cannot log into the pc without it. The only method is to have a repair shop replace the bios chip with a new one.
There is no password utility that will bypass this.

Mar 31, 2009 | MPC Computers TransPort X1000 Notebook

1 Answer

Sony vaio pcg-k25 won't stay on after pressing the power button. it powers up to the window to enter my password then turns off on it on. sometimes won't even reach that far, just the led lights go on than...


Please perform the following troubleshooting:

(i) Remove and reseat the RAM modules.
(ii) Remove the Battery and reinsert it after cleaning the metal contact.

If the issue persists even when the AC Adaptor is connected then try to get into the BIOS and check if the Computer restarts or shutdown automatically. Restart the Computer and press the F2 key as the VAIO logo appears to enter into the BIOS window. if the Computer shutdown even when in the BIOS then service will be required otherwise try reinstalling the Operating System.

Jan 22, 2009 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...