I just need a linki for the recovery management

Which operating system ?????.....
The HP Recovery Partition that comes pre-installed on most new HPs is like built-in insurance if your system becomes unstable or fails.
If the problem is severe enough, you may not be able to start the HP Desktop Recovery Manager from Windows but you can start it manually by following the steps below.

Disconnect all peripheral devices and power on the computer.
Press the F11 key after the computer first powers on to start the HP Recovery Manager.

Follow the on-screen instructions to back up recoverable files on the hard drive to an external drive or media.
Continue following the instructions to recover the hard drive to its original factory condition.
Click "Finish" when the recovery is complete.
Reconnect devices and reboot the computer.
Reinstall software and update Windows and HP to current settings.


Performing an HP System Recovery (Windows Vista)
HP Pavilion Recovery Partition
Accessing the recovery partition on your HP Pavilion laptop allows you to restore your computer to speed it up, eliminate a virus or repair your Windows operating system.
The Recovery Manager program makes it possible to restore your laptop to its settings as of a previous date or restore your computer to its original factory settings, which will erase all of your installed programs and personal data.
Using the recovery partition allows you to bypass the hassle of keeping track of recovery discs, which could be damaged in storage, rendering them useless when you need them.

Turn on or restart your HP Pavilion laptop.
Press "F11" when the "Press <F11> for recovery" message appears during the HP Pavilion boot process.
Select "Recovery Manager" from your list of recovery options and press "Enter."
The Recovery Manger program will open on your screen, and you can begin the recovery process.
Access Recovery Manager Within Windows
Click the "Start" icon or "Start" button in the lower left corner of your Windows home screen.
Click "All Programs" and then "Recovery Manager."
Click "Recovery Manager" again to open the Recovery Manager program on your HP Pavilion laptop.
using the hp recovery manager in windows 7

Which operating system ??..

HP Pavilion Recovery Partition
Accessing the recovery partition on your HP Pavilion laptop allows you to restore your computer to speed it up, eliminate a virus or repair your Windows operating system.
The Recovery Manager program makes it possible to restore your laptop to its settings as of a previous date or restore your computer to its original factory settings, which will erase all of your installed programs and personal data.
Using the recovery partition allows you to bypass the hassle of keeping track of recovery discs, which could be damaged in storage, rendering them useless when you need them.

Turn on or restart your HP Pavilion laptop.
Press "F11" when the "Press <F11> for recovery" message appears during the HP Pavilion boot process.
Select "Recovery Manager" from your list of recovery options and press "Enter."
The Recovery Manger program will open on your screen, and you can begin the recovery process.
Access Recovery Manager Within Windows
Click the "Start" icon or "Start" button in the lower left corner of your Windows home screen.
Click "All Programs" and then "Recovery Manager."
Click "Recovery Manager" again to open the Recovery Manager program on your HP Pavilion laptop.
using the hp recovery manager in windows 7
or
While restarting the computer keep tapping on the F10 key
on the next screen you will find start system recovery , and on the next screen you will find advanced options
in advanced option you will find an option for Destructive Recovery.. click that

If you are not able to run the recovery on the computer as above then you will need no use a set of recovery cds..... if you dont have them you can get it from HP..
or
HP Desktop factory settings
The HP Recovery Partition that comes pre-installed on most new HPs is like built-in insurance if your system becomes unstable or fails.
If the problem is severe enough, you may not be able to start the HP Desktop Recovery Manager from Windows but you can start it manually by following the steps below.

Disconnect all peripheral devices and power on the computer.
Press the F11 key after the computer first powers on to start the HP Recovery Manager.

Follow the on-screen instructions to back up recoverable files on the hard drive to an external drive or media.
Continue following the instructions to recover the hard drive to its original factory condition.
Click "Finish" when the recovery is complete.
Reconnect devices and reboot the computer.
Reinstall software and update Windows and HP to current settings.


Performing an HP System Recovery (Windows Vista)

if this is wireless try pushing the button on the top of your linky's if with the cable try reinstalling the software and restarting the computer.

Hi.

Please follow the steps to create the recovery discs using the HP Recovery Manager.


Click Start>AllPrograms>Recovery Manager.
Select Recovery Manager. This will open Recovery Manager.
Click Advanced Options. If you are using a laptopand operating on battery power alone you must connect to anAC power outlet before you can go to the next step.
Select Recovery disc creation. Click Next. The Recovery Manager will begin creating the necessaryfiles. This may take a while, so be patient until the bar has reached 100%.
Read the table of requirements thatappears. Depending on the type of discs you use, more or less may beneeded; if you use ordinary CDs, Recovery Manager will require more compared tofewer discs if DVDs are used.
Insert your first blank disc, havingmade sure it is fully labeled, such as "Recovery Disc 01" or"Recovery Disc 1 of 2". The optical drive of your computerwill have automatically opened. If not, open manually. Close the optical driveand click Next.
Understand and confirm you want to gothrough with the operation using the type of disc you have inserted by clickingNext.
Wait while Recovery Manager now createsthe first disc. This may take 20-40 minutes as it collects the files,writes the files and verifies the files to disc.
Remove the disc and insert the nextafter the first has been finished after clicking Next. Continue the creation of discs according to thenecessary requirements, up until the last has finished creating files.

Click Next after removing the disc and then Finish to complete the session. Congratulations! You havejust made yourself a set of recovery discs.

Use the recovery discs to recover yourcomputer in case of system instability or failure.

Thanks!!!!!

The Recovery Manager program makes it possible to restore your laptop to its settings as of a previous date or restore your computer to its original factory settings, which will erase all of your installed programs and personal data. Using the recovery partition allows you to bypass the hassle of keeping track of recovery discs, which could be damaged in storage, rendering them useless when you need them.


Instructions

Access Recovery Manager During Windows Startup
1. 1 Turn on or restart your HP Pavilion laptop.
   
2. 2 Press "F11" when the "Press <F11> for recovery" message appears during the HP Pavilion boot process.
   
3. 3 Select "Recovery Manager" from your list of recovery options and press "Enter." The Recovery Manger program will open on your screen, and you can begin the recovery process.
   Access Recovery Manager Within Windows
4. 1 Click the "Start" icon or "Start" button in the lower left corner of your Windows home screen.
   
5. 2 Click "All Programs" and then "Recovery Manager."
   
6. 3 Click "Recovery Manager" again to open the Recovery Manager program on your HP Pavilion laptop.
   

If you put the old hard drive back in your system and it works fine, log onto Toshiba's web site and download the updated drivers, firmware and BIOS. It is really easy to do.
Try this linkI hope it helps.

mpshyla

The reason for the CD is to configure the router to your cable modem. So if you reinstalled your computer you do not need the CD again. All you need to do is set the computer's Gateway back to your router. The links below will help you do this.

http://www.fixya.com/support/r4602477-check_change_computer_ip_address_in

Let me know if you have any more problems or questions.

Issken
http://www.fixya.com/users/issken

You will need to check the wireless settings of the router.
Is there any computer online using the router.
check the IP address on that computer.
If yes then you can open the router set up page on that computer.
router set up page is the page where you can check all the router settings.
Click Here for more information about the routers and network

If you have linksys hardware install the cd that came with hardware and get to linksys website and download latest driver. Reformatted cleans drive to zip data and you needed to reload XP to get it going so anything you installed after the system purchase you will have to reinstall.