Question about Canon MP610 Photo All-In-One Printer

1 Answer

Whenever i try to print anything my printer prints the first 5 lines or so and then just stops and moves on to the next page where it print the first 5 lines before giving up again.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 74 Answers

What type of document are you trying to print(PDF, MS Word doc, etc)?
Is the printer connected via USB cable, Bluetooth?

First thing I would do is try printing a different document or even a different type of document.
If printing different documents results in the same problem then I would uninstall the current drivers, download the latest drivers from Canon, then install those drivers and try printing again.
Also, if the printer is connected to your computer via USB cable verify the cable has no exposed wiring or try a different USB cable.

Posted on Mar 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to stop the stop the printer into moving to the next page after printing a single line


set up the page length to desired length on the computer where the printer is installed.

Oct 26, 2012 | Panasonic KX-P1150 Matrix Printer

1 Answer

My HP 5500 stops printing jobs on its own. If I hit continue, it keeps printing the same job and not moving on to the next one in line. It also prints all of page one and page two, but I have to pull...


Try unplugging it for 10 minutes to reset it.

also clear out all print jobs on the computer and then try again and let me know what the situation is after following the two directions I gave.

thanks

May 05, 2008 | Office Equipment & Supplies

1 Answer

Hello, my problem is that my laserjet printer p1005 doesnt print anything.. whenever i command it from my pc it doesnt do anything.. i tried changing cartridge but still same prob.... please helllppp...


First, print an Engine Test Page.

To print an Engine Test Page, open and close the cartridge door five times while the printer is in ready mode. The printer should print one page with multiple horizontal lines.

If the engine test page printed, is a comunication problem (PC configuration,PC/Printer conection/Driver bad installed)

Jul 18, 2011 | HP LASERJET P1005 Printer

1 Answer

Whenever I try to print out anything it puts it in pending or queue. How do I stop it from doing that?


please confirm which printer you have and how u send print command
as some printer come with quew and nest option to adjust the print in one page

Aug 22, 2009 | Office Equipment & Supplies

1 Answer

How do I realign my hp photosmart c4480 printer?


To align the print cartridges from the HP Photosmart Software
1. Load letter or A4 unused plain white paper into the input tray.
NOTE: If you have colored paper loaded in the input tray when you align the print
cartridges, the alignment will fail. Load unused plain white paper into the input
tray, and then try the alignment again.
2. In the HP Solution Center, click Settings.
3. In the Print Settings area, click Printer Toolbox.
NOTE: You can also open the Printer Toolbox from the Print Properties dialog
box. In the Print Properties dialog box, click the Features tab, and then click
Printer Services.
NOTE: You can also open the Printer Toolbox from the Print Properties dialog
box. In the Print Properties dialog box, click the Features tab, and then click the
Printer Services button.
The Printer Toolbox appears.
4. Click the Device Services tab.
5. Click Align the Print Cartridges.
When prompted, ensure plain white letter or A4 paper is loaded in the input tray, then
press the button next to OK.
NOTE: If you have colored paper loaded in the input tray when you align the print
cartridges, the alignment will fail. Load unused plain white paper into the input
tray, and then try the alignment again.
The product prints a print cartridge alignment sheet.
7. Load the page print side down on the right front corner of the glass, and then press
the button next to OK to scan the page.
When the On button stops flashing, the alignment is complete and the page can be
removed. Recycle or discard the page.

Jul 18, 2009 | HP PhotoSmart C4480 All-in-One Printer ...

1 Answer

Thick black line printing on the back of every page


your printer needs to be serviced and check printer alingnment

May 21, 2009 | Canon PIXMA MP530 All-In-One InkJet...

2 Answers

Printer will print first page and then jam


Lean your printer back a bit!
(put a book underneath both of the front corners).
This fixed it for me!

Mar 22, 2009 | Samsung CLP 300 Laser Printer

1 Answer

HP J5780 Problem-Line on printed pages


most likely you have a flat spot on the roller.
that is exactly what is going to happen, when the paper hits the flat spot or a low spot. the paper stops and skips. them the print is coming out smeared.
you can get a repair kit or replacement roller from HP.

Jan 04, 2009 | HP Officejet J5780 All-In-One InkJet...

2 Answers

Cannon Imageclass printing problem


You need to check your glass first to make sure it has no scratches. Then you can run a copy and open door to stop paper in the center of the machine, b4 it goes through fuser. If line is on copy, you have a bad drum. If not your upper fuser roller is bad.

Oct 19, 2007 | Office Equipment & Supplies

1 Answer

Deskjet HP 6940


this might be a software problem also. please specify which software you are using to print these banners. Thanks

Jun 12, 2007 | HP Deskjet 6940dt InkJet Photo Printer

Not finding what you are looking for?
Canon MP610 Photo All-In-One Printer Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2005 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...