Question about Canon BJC 3000 InkJet Printer

1 Answer

Hi, My Canon BJC 3000 printer has the orange light flashing 7 times, followed by 1 green light. What does this mean and How can I fix it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 105 Answers

Hi,

7 orange followed by 1 green means Cartridge Error.

If you have recently replaced the ink cartridges then please check that they are installed properly and re-seat them if necessary.

If you have not recently replaced your ink cartridges then check the ink levels using the software that came with the printer.

Try replacing the ink cartridges and if that does not solve the problem then you can contact Canon support.

The details for Canon support in the UK can be found here:
http://www.canon.co.uk/Support/Consumer_Products/services_locator/index.aspx

Or in the USA:
http://www.usa.canon.com/cusa/support

Please rate my answer if this helps.

Many thanks,

Chris

Posted on Mar 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon bjc 3010 waste ink error


just clean your cartridge..align it properly when you it back..surely it put properly.

Feb 08, 2014 | Canon BJC 3000 InkJet Printer

1 Answer

What do it mean when a orange light comes on


It depends!!
At times paper jam and also at times ink cartridge is low or defective.
Also wrong position of cartridge gives that error.

Jan 14, 2010 | Canon BJC 3000 InkJet Printer

2 Answers

6 orange flashes and 1 green, won't print ??


6 orange flashes and 1 green, cartridge is in, well seated in the right slot and the contacts on the cartridge are clean and unblocked, but it still won't print. Any other advice, please. Thanks.

Nov 27, 2009 | Canon BJC 3000 InkJet Printer

1 Answer

I have a canon bjc 3000 printer and cannot print...it is flashing 4 orange lights followed by a solid green light...please help


Four orange flashes means the cartridge is out of ink. The ink cartridge itself is the BC-33, and it contains four ink tanks, BCI-3B, BCI-3C, BCI-3M, and BCI-3Y. If the printer had been working properly up until this point, check each of the ink tanks (they unlatch and come out of the cartridge) and replace just the empty one(s). If all the tanks have ink in them, it indicates the cartridge itself is bad, and you will have to replace the entire cartridge.

Nov 11, 2009 | Canon BJC 3000 InkJet Printer

1 Answer

Hi, i have canon bjc 3000 printer, and it has stopped printing. Also, it is flashing 4 orange lights followed by a solid green light. please help me. thank you


4 times says the ink is empty or not installed.
It has a sensor that checks the ink tanks, if ink is full you may have a bad sensor, or a paper scrap covering.

Sep 04, 2009 | Canon BJC 3000 InkJet Printer

1 Answer

Not printing from one computer


If the CHARGE/ERROR light is remain on orange with beep 1 times, it mean the paper is not properly set in the feed slot, just remove the paper and reload it properly.
If the POWER light is flashing green, that mean your print job is not finish yet.

YBC (/\)

Dec 15, 2008 | Canon BJC 55 InkJet Printer

1 Answer

Canon BJC 8500 WASTE INK FULL


.
How to Reset Waste Ink Protection Counter Canon Pixma IP8500 Printer

Instructions:
Resetting Waste Ink Counter Canon Pixma IP6000, Canon MP450, Canon Pixma IP8500

1. Turn off the printer.
2. Whilst pressing Resume button also press on POWER.
3. Then Press RESUME button and release POWER.
4. Then Press RESUME button again .
5. Then release all buttons.
6. Led Indicator should be green and stay green.
7. Click RESUME button 4 times if you wish to try again.

Then See Table Below:

Orange - Service test print ONCE - Orange - Service test print.
Green - EEPROM information TWICE - Green - EEPROM information print.
Orange - EEPROM initialization 3 TIMES - Orange - EEPROM initialization.
Green - Waste ink counter resetting 4 TIMES - Green - Waste ink counter resetting
Orange - Destination setting (Press Power then Press Resume 3x) 5 times - Orange - Destination setting (Press Power Press Resume 3x)
Green - Print head deep cleaning 6 TIMES - Green - Print head deep cleaning.
Orange - Green, Orange - Return to menu selection 11-13 TIMES - Orange, Green, Orange - Return to menu selection.
Green - Left margin correction 14 TIMES - Green - Left margin correction.

8. Turn off printer.
9. Restart Printer.
Good Luck!

Tinteiros - Magic Inkjet Flush (Ebay)

Nov 07, 2007 | Canon BJC 8500 InkJet Printer

Not finding what you are looking for?
Canon BJC 3000 InkJet Printer Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1983 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...