Question about Car CD Changers

Open Question

Kenwood krc-388 instalation.

I wish to connect to car battery in tool shed-how do I connect? What wires where?

Posted by on

1 Suggested Answer

pjstanley
  • 185 Answers

SOURCE: How to connect an aux audio cable from Kenwood krc 705 to Ipod Photo

no sorry cant help

Posted on Apr 05, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to get the security code for Kenwood KDC-608OR


ok I just found this info online and they say it came from the service manual for that stereo so I hope it helps:

You will need a Kenwood RC-410 remote control. This remote works on KDC-519, KDC-X859, KDC-319, KDC-4019, KDC-MP919, KDC-X759, KDC-419, KDC-X459, KDC-MPV619, KDC-MPV7019, KDC-2022, KDC-2022V, KRC-435, KRC-535 and KDC-X959

To reset the code do the following:

1) Turn on the car.
2) The faceplate rotates out and the CODE - - - - prompt appears.
3) Press >>' and Auto keys simultaneously on the faceplate and hold for 4 seconds. (If the faceplate rotates back into the console push on the upper left top edge of the faceplate and it will flip back around. Press the Eject button and then try it again.)
4) The screen will still say CODE, but the - - - - will disappear! When this happens press the 5 key on the remote twice and it enters a K on the display on the faceplate. Hit the >>' key on the faceplate.
5) Press the 2 key on the remote three times and it enters a C on the display on the faceplate. Hit the >>' key on the faceplate.
6) Press the 2 key on the remote once and it enters an A on the display on the faceplate. Hit the >>' key on the faceplate.
7) Press the 7 key on the remote twice and it enters an R on the display on the faceplate. Hit the >>' key on the faceplate.
8) The radio goes into All Off mode and you are set! Hit the SRC button on the faceplate to select CD, Radio, etc.

Above information source = http://techbybucky.blogspot.com/2008/01/how-to-reset-security-code-on-kenwood.html

Jun 19, 2011 | Kenwood Car CD Changers

1 Answer

I have a Kenwood KRC 858 Cassette r ... we urgently need a code! can you help me please?


You can try 3510, as that is the code that is illustrated in the owners manual, but that is not guaranteed to work. If you have forgotten the code, then you will need to call Kenwood for assistance

Mar 28, 2011 | Kenwood Car CD Changers

1 Answer

LOOKING FOR COLOR OF WIRE TAKING POWER IN TO THE RADIO.IT IS A KENWOOD KRC-X858


red is the 12 volt power line. yellow is the memory line(constant 12 volts) . small red wire is the switchable 12 volt line that only has 12 volts when keys in ignition

Nov 17, 2009 | Car CD Changers

1 Answer

I have a kenwood krc-557l and dont know what wires are what...


Red is "Key on Pwr"
Yellow is "Constant Hot" always powered
Black is "Ground"
Blue is "Pwr antenna or amplifier remote turn on"

This is tapping my memory a little, however, I believe stripe is positive on Kenwood and solid is negative. The easiest way to test spkr wiring is to connect your pwr,gnd,etc. then make sure all other wires are individually taped barring one. Use any speaker, turn on the radio, connect one wire to pos & one to neg on spkr, look at the cone of the speaker, if it pops out, you have the correct wiring "in phase" if it's incorrect, the spkr will appear to pop "in". That's "out of phase" reverse your wiring.

Hope that helps

May 17, 2009 | Car CD Changers

1 Answer

Can't eject cd magazine - E-99 error message


I put a small pin in the reset button a few times and that then got the catridge to eject.

Apr 14, 2009 | Car CD Changers

1 Answer

Need a wiring schematic KDC C717


Black typically goes to ground.
Red goes to battery (+) (+ all the time)
Yellow typically goes to switched power (+ when ignition in run position)

Mar 06, 2009 | Kenwood KDC-C717 10-Disc CD Changer

2 Answers

Can't eject cd magazine - E-99 error message


I had the same problem. I opened up the unit and found out that there is a plastic gear that moves the loader. When worn the loader can not load tha magazines nor change cd's. I replaced the gear and the cd autochanger worked fine.

Gerald,

Kenya.

Dec 01, 2008 | Kenwood KDC-C717 10-Disc CD Changer

1 Answer

Kenwood kdc 1016 wiring problems


Hi

For a Kenwood KDC1016, the below listed wiring and color coding is followed:
Yellow - Battery B+12 terminal
Red - Accessory/Ignition B+12
Black - Chassis/Ground
Blue - Power Antenna
Blue-White - External Amplifier trigger
White - Front Left +
White/Black - Front Left -
Gray - Front Right +
Gray/Black - Front Right -
Green - Rear Left +
Green/Black - Rear Left -
Violet - Rear Right +
Violet/Black - Rear Right -

Hope this be of help/idea. Pls post back how things turned out or should you need additional information.

Good luck and kind regards.

Feb 06, 2008 | Car CD Changers

Not finding what you are looking for?
Car CD Changers Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car CD Changers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Car CD Changer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...