Question about Wurlitzer Jukebox CD Player

1 Answer

The CD number display is flashig with a number 8 and the Jukebox will not respond at all to the remote or manual keyboard for disk selection Thanks Andrew

Posted by on

  • andrew_allwo Mar 12, 2011

    Only in the sense that this could be a major problem and an indication that the repair could be expensive at around $500



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 11,800 Answers

In the 1015 model - the one in the picture, the error 8 signifies that the controller of the player is no longer communicating with the cd mechanism: either the mechanism has failed and it will have to be replaced or the controller has a defect in itself.
The only way to fix that is to open the unit, test and diagnose it and replace the failed part. That is a job that only a well qualified personnel should do - contact Wurlitzer here
to obtain the data on the closest certified repair shop. Beware, the repair will be expensive, over $500.

Posted on Mar 12, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Keyboard on jukebox not working

You need to get the service manual and go through the regular steps of troubleshooting. It could be a bad connector or broken solder joint on the keyboard- I would have to see the unit.

Dec 08, 2012 | Audio Players & Recorders

2 Answers

I purchased a used Wurlitzer 1015, question When selecting number 51 is a code number 82 and does not play can you explain me this, what the problem is thanks

The number of Cds in the carousel can be set on the Credit unit to stop it playing fresh air if for example you only have 50 Cds and not a whole 100. Sounds like yours is set to 50 so won't play anything over 50.
I 'think' this is what you do.
On the computer credit unit...
Service Switch ON...Press LT button.
Press 5 on the keyboard once.
Enter 0000
Service Switch off.
Press LT or turn machine off/on.

Aug 03, 2011 | Wurlitzer Jukebox 1015 One More Time...

1 Answer

I have just installed the remote conrol kit in my 1015. Selection and volume controls working okay on remote. Not able to make selection from buttons on jukebox - does remote overide this function? ...

Sounds like you have put the cables in the wrong place. Put the keyboard cable back as it was and test to see if the keyboard works.
The mysterious "power" button does nothing unless you have a kit that it activates which turns the power off.

Jun 01, 2011 | Wurlitzer Jukebox 1015 One More Time...

1 Answer

I need the number pad or keyboard for selecting songs for my wurlitzer rainbow jukebox.

I can either sell you a complete new keyboard assembly or economically repair yours. Please email

Apr 29, 2011 | Wurlitzer Jukebox CD Player

1 Answer

The numbers "1" and "0" are not operational on the

If you pull the keyboard apart, there are rubberized membrane keypads above the circuit board. Be sure the board hasn't oxidized. You will find the keypads are all linked together and every 2nd one is not used. Cut out a couple of the spares and put them over the keys that don't work and see if that helps. You may have the same problem with the rubberized keypad on the remote.

Hope this helps.
Mike Graham

Dec 24, 2010 | Wurlitzer Jukebox 1015 One More Time...

2 Answers

I have a rowe ami laserstar and cannot remember how to initialize when adding a new disk. Can you please help.


Place the service switch into service, SERVICE MODE should be displayed on the keyboard display.
Type 31 and the display will show PROGRAM INIT enter the CD numbers that you have changed and press the popular button after each number.
After you have entered all the CD changes place the service switch back to normal and the initialization will begin.

Ala Hood

Oct 17, 2010 | Wurlitzer Jukebox CD Player

1 Answer

I have a wurltzer CD 100 disk player. I think the

Either the CD player, CD control unit, or Selection & Credit Computer are defective. I can help over the phone with troubleshooting, please email

Jul 30, 2010 | Wurlitzer Jukebox CD Player

1 Answer

Display panel flashes 126, keypad nonresponsive HELP!!

hi if its the same as the wurlitzer on emore time i have the manual and service programme on a disc if u need one email me

Feb 17, 2007 | Wurlitzer Jukebox Princess 120-Disc CD...

2 Answers

Number 8 flashes on display screen and disk changer is stuck

The #8 indicates either the settings for the amplifier is too high so tryi turning down both channels and/or the fuse Si3 on the amplifier panel inside the wurlitzer is blown

Aug 19, 2006 | Wurlitzer Jukebox 1015 One More Time...

Not finding what you are looking for?

Open Questions:

See all Wurlitzer Jukebox CD Player Questions

Wurlitzer Jukebox CD Player Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wurlitzer Audio Players & Recorders Experts


Level 3 Expert

2237 Answers

Donald Chadwick
Donald Chadwick

Level 1 Expert

9 Answers

The Knight
The Knight

Level 3 Expert

74887 Answers

Are you a Wurlitzer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides