Question about Nokia 6300 Cellular Phone

2 Answers

My 6300 was working perfectly and i just finish back up and i want to update software. so i just unplug the usb cable and after that my mob does not open even i press the on button many time as usual way hold for a second. but blue light still on so pls suggest me what i have to do now. eveything happand when i upedate the software pls pls help me i need some important mob no. which only i feed inside thanks in advance. nj

Posted by on

  • neerajjainhk Mar 14, 2011

    thanks to let me know, so that mean we do not update our mob from internet? and how can i do your choice no 1 now? when the mob is not showing anything on screen?

  • neerajjainhk Mar 14, 2011

    my 6300 was working perfectly and i just finish back up and i want to update software. so i just unplug the usb cable and after that my mob does not open even i press the on button many time as usual way hold for a second. but blue light still on so pls suggest me what i have to do now. eveything happand when i upedate the software pls pls help me i need some important mob no. which only i feed inside thanks in advance. nj

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,574 Answers

Just press simultaneously these 3 buttons: on/off + * + 3 (HARD RESET)
If still won't turn on ,your nokia phone must be properly flashed by flashing machine at Nokia Care Center in your area.

Posted on Mar 14, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 438 Answers

Neeraj,

There is always a risk in updating the phone's firmware over the internet. One small glitch in the internet connection and you can render your phone useless. I lost my Nokia E61i two years back this way. The phone had to be replaced by Nokia as it was under warranty.

While the phone is being updated it has to reboot once and then do some more procedures. I hope you did not disconnect it during the process?

You have two choices now. 1. Try to update once again. and

2. If that does not work then go to Nokia Care for the needful.

All the best.

Posted on Mar 12, 2011

  • Vinay Kumar Mar 14, 2011

    Neeraj,

    Please connect the phone to the computer and see if PC Suite works on it. if the phone is not recognized then that means that you are left with choice 2 only. Your phone is beyond Do It Yourself phase. Choice 1 was to check if you could do it yourself. Please visit the nearest Nokia Care.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 6300 was working perfectly and i just finish back up and i want to update software. so i just unplug the usb cable and after that my mob does not open even i press the on button many time as usual way...


Its an software problem you have to flash your mobile obviously you cannot able to take informations stored on your phone. Try switch on your mobile by power on + call+3 by pressing 3+call button switch on the phone

Mar 14, 2011 | Nokia 6300 Cellular Phone

Tip

"Unable to Open Theme Corrupted" in Nokia 6300


Hello Friends,
Here am trying to give a Solution for the Problem "Unable to Open Theme Corrupted" in Nokia 6300.I had tried many attempt to Solve this Problem.Finally found out a Simple and Easy Solution for this Error -instead of wasting money by giving in any Shops for Flashing the Phone(Software Update).If this problem occured in 6300,then there cannot be Possible to Apply any theme or even Open a Nokia Default Theme.The Error might be Displaying on Start up of your Device(Nokia 6300) and when trying to Aplly a Theme.
Requirements:-
A Computer having USB connectivity
c4229dd.jpg
Nokia Dke 2 Cable
b4b0e20.jpg
Nokia 6300 Faulty Phone
fb1bcf1.jpg


You have to follow steps mentioned below to Eradicate/Solve this Problem.
  • Download Oxyfile (To Download Click here)
  • Install it on your Computer
  • Connect your Nokia 6300 with Specified Cable
  • Open Oxyfile Software Click on 'FILE BROWSER'
a0b6a74.jpg
  • Click on C: drive(Mobile System)
030d1a2.jpg
  • Click on Plus icon of Gallery to Expand
d75ff79.jpg
  • Click on 'Themeactive'
  • Delete the file 'Theme.ini' and Other files in that Folder(Ensure Delete of File Theme.ini)
ab34fa5.jpg
  • Unplug Your Mobile from Cable
  • Switch it OFF for 10 Seconds and Switch ON again
You are Done and Ready to Use..Your Problem Solved Now.Now you can Apply any theme on your Phone....I like to know your FEEDBACK....
>After Done this-it is better to Make an Update only if you want to get Benefit of Full Flash[Instead of Doing from a Service center]..
Download Updating Software from Here OR go to this Link
  1. Download and install Nokia Software Updater (this need only be done once).
  2. Connect your phone to your PC with a suitable USB cable and open Nokia Software Updater.
  3. Follow the on-screen prompts until your update is complete!
NOTE:Battery Should be FULLY charged When Starting an Update Process.Do not TRY to Remove Cable When Updating is in progress(Phone may be Permenently damaged if Unplugged)....Now your Phone look Newer than ever.....
Thanks for Reading this text ...If you like this Post-Don't Forget to VOTE ME....Keep Using FixYa....

****************************************************************************************
To Solve "only 70 sets allowed setting discarded" in Nokia 6300 Click here

on May 30, 2010 | Cell Phones

1 Answer

I can't open my 6300 because i forgot my password..please help to solve this problem.. tnx, FCC ID: PPIRM-217 IC: 661U-RM217 Type: RM-217 Model: 6300 MADE IN CHINA 359835/01/718610/3


1. first install phoneix service
2. open it
3. In Phoenix, click File>Manage Connections.
4. Now click New.
5. Now select the type of cable you are using. If you are using DKE-
2, CA-53 [N-Series] cable, select USB.
6. Click Next. It will find your product and say FOUND. If it doesn't

find any, you can try changing your cable type by clicking Back.
7. Click Next and then Finish.
8. Now your cable type [USB] appears in the connection list. Select

it. Click APPLY and then CLOSE.
9. Now select File>Open Product.
10. A list of RM code will open. Select your phone's RM code. Like

RM-133 for Nokia N73. Click OK
11. Now select File>Scan Product.
12. Your phone's firmware info will appear at the extreme bottom of

the Phoenix window.
13. Now go to Flashing>Firmware Update.
14. A window will open.
15. On that window click Browse button [the one with three dots].
16. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
17. Click Ok.
18. Click Refurbish.

19. Now your actual flashing has started. Don't touch your phone or press any button until the flashing has finished. Also don't touch your data cable and your computer system.
20. At the end Phoenix will tell you to remove your phone as the

flashing has finished.
21. Now wait for your phone to reboot into latest firmware.
22. The flashing procedure takes 8-9 minutes, a lot faster than Nokia
Software Updater.
Flashing dead phones [Which show only white screen on startup
this will reset your password

Jan 09, 2011 | Nokia 6300 Cellular Phone

1 Answer

Hi everyone i 've got nokia 6300 doesnt work becuause i try to update it through the internet nd during the updating i disconect the usb cable i dont know what happen so please find me solution for it.


Hi,

If you want a home remedy, it is really to update the software again - low chance of working. Highest chance of working is of course to send it into Nokia Care. But must remember to back up information first.

Jul 12, 2010 | Nokia 6300 Cellular Phone

2 Answers

I want to update it software version via USB cable


Nokia 6300 firmware update
Subject: how to update firmware for Nokia 6300 to the latest official version

1. You need download and install NSU - Nokia Software Updater (http://europe.nokia.com/support/download-software/device-software-update/download#) and run it to ensure that all is ok! (don't forget to switch on and connect Nokia 6300 via USB with PC)
2. You need to download and install NSS (Nemesis Service Suite) (http://www.b-phreaks.co.uk/index.php?main_page=page_2), the latest version of NSS was 1.0.38.15 (select "Virtual USB Device" mode)
3. Close NSU if it's not closed and load NSS then click icon "Scan for new device"
4. Click icon "Phone Info" and button "Scan" inside it
5. If all is ok you'll see some lines with Phone Version, Phone IMEI and so on
6. Click button "Read" and remember your "Product Code"
7. If your want to clean your phone go to tab "Tools" and switch to subtab "Factory Setting", choose option "Full Factory" then press button "Reset" (NOTE!!! all personal data and settings will be cleared!)
8. Return to tab "Phone info" and type in the field "Product Code" the following code 0537621 (or any code from (http://www.expansys-usa.com/ft.aspx?k=96957)) for version 7.21, or code 0557624 (or any code from (http://www.a2phone.com/6300-rm-217-dp20-900-sw-0730exe)) for version 7.30, select option "Enable" then press button "Write"
9. Close NSS, run NSU
10. Now NSU should update firmware to version 7.21/7.30 (or any latter build) (http://europe.nokia.com/support/download-software/device-software-update/can-i-update)
11. Repeat stages 3 - 5
12. Type in the field "Product Code" the code that you remembered before, select option "Enable" then press button "Write"
13. Close NSS
14. Use you clean phone with new firmware!

Mar 17, 2010 | Nokia 6300 Cellular Phone

1 Answer

Download songs tp nokia 6300


download song from net.and copy to ur pc...then copy to ur mob thro ur nokia usb cable or thro nokia suite

Aug 07, 2008 | Nokia 6300 Cellular Phone

1 Answer

How to update 6300


goto nokia site and update ur new version of ur mob software..this update will takes place upto 2 hour..

Aug 05, 2008 | Nokia 6300 Cellular Phone

2 Answers

Nokia 6300 incompatibility with Nokia PC suite


You need the latest Nokia PC Suite installed on your PC.
Then do an update of your phone software. Nokia PC Suite v6.85

WARNING
When updating software on Mobs, be sure to:
HAVE A FULLY CHARGED BATTERY INSERTED;
PUT IT ON GENERAL PROFILE;
TURN OFF YOUR PIN NUMBER;
CONNECT YOUR CHARGER TO YOUR MOB AND SWITCH IT ON;
DO NOT ----- DO NOT ---- TOUCH YOUR PHONE WHILE THE UPDATE IS GOING ON;
THIS CAN TAKE 30 MINUTES OR MORE.
And obviously don’t unplug the phone from the PC.
Be patient, you may have to do a restart or two on your mob afterwards. Even remove the battery to get it going again (not recommended). But give it plenty of time.
It is also wise not to use your PC while updating software, just in case the PC freezes.
If the PC freezes during an update, you’re up the creek without a paddle...

I did an update on a Sony Eric 810i it took nearly two hours.
More... Your phone turns itself on and off, sometimes more than once while updating software, you should leave it well alone during the update.

Mar 30, 2008 | Nokia 6300 Cellular Phone

3 Answers

Software Upgrade


install the cd that came with the phone, once that is done and you have connect you phone via usb cable to the pc, switch on the phone then when the pc has located and recognised your phone go to the update column and the pc will search nokia site for a new upgrade.

Dec 11, 2007 | Nokia N70 Cellular Phone

28 Answers

Nokia N73 software update problem


during software update N73, the phone does not switch on. what can i do

Aug 07, 2007 | Nokia N73 Cellular Phone

Not finding what you are looking for?
Nokia 6300 Cellular Phone Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...