Question about Samsung LN40A650A LCD TV

1 Answer

When I switch on the unit, i can hear the sound but there is no picture

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Hi! Welcome to Fixya!

If you are unable to view video on your television set, the issue may be that the TV's video input selection does not match.

The TV input source must match how the device for example DVD player is connected to the TV. At the back of Samsung's LN40A650A HDTV are three HDMI inputs, plugs for component input, an antenna input for the DTV receiver and a VGA input. Please check on what port the device is plug.

To correct the issue, use the TV's remote control and change the video input selection.

  • Press the Menu button on the remote control and navigate to TV Input
  • Only ones that are actually connected are highlighted and available.
  • If there are multiple device connected please make sure you select the device you want to connect.
You may also check if all cables are properly connected.

Thank you.

Posted on Mar 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No picture, VSCAN issus.


If you hear a kind of hissing sound then is a faulty ballast

Jul 18, 2008 | Philips 42PF7320 42 in. EDTV-Ready Plasma...

1 Answer

My Mitsubishi. TV model number 4543 played but no picture I can hear the sound but no picture.


check the leads in the back are in the right position -most of these are colour coded -white to white red to red yellow to yellow -otherwise you may have to use a hdmi cable or you may just not have the tv unit in the right settings -read your manual if you have one -these can be quite confusing so just play about with it but try and remember what youve done -otherwise see if unit has a factory preset switch you can push and it goes back to how it was set at factory...

Aug 07, 2014 | Televison & Video

1 Answer

Unit powers up, cd and radio seem to be operating properly, but no sound is heard, unit worked fine a few days before, all wires are conected, everything seems unchanged


Well...as you said...the unit powers up...so you don't have a "dead set".I don't know if the speaker can be disconnected from the unit.As a rule of thumb...it is very rare that both channels (left and right )fail at the same time...it is usually one channel while the other speaker still operates.This is what I want you to do...In a quiet room..get really close to the unit...Switch it on and listen for any sound from the speakers...get really close...you should hear a slight hum from the woofers and a high frequency "hiss" from the tweeters....If no sound is heard..switch the unit off..You should hear a "plip" sound...If not...switch it on again...you should hear a slight "bump" sound from the woofers...If you hear no sound from the speakers at all..there is a problem with the output stages of the amplifier section.If you do hear sounds fron the speakers,,Turn up the volume and watch for an increase visually on the display (such as ascending numbers).If there is no indication of a volume increase...The "mute" may be stuck on..Try switching it off and on...please let me know what happens after you do all the tests....Looking to hear from you......PEACE!!!
ok...

Jul 11, 2011 | JVC HX-Z3 CD Shelf System

1 Answer

Heater is not charging. input charge knob does not make a thermostat style click when rotated like all others in the house. Trip on consumer unit is fine and all switches are on.


I assume you are talking about a storage heater here. Most of these unit have a small trickle switch underneath or close to the thermostat switch that may need to be reset manually. Once you push the small switch you will hear a click sound which resets the unit and the heater should work as normal. It is a bit hard for me to pin point where exactly it is located but if you get back to me with a picture then I can help further. Good luck and if you have any question please feel free to ask but allow me some time to reply. Thanks.

Jan 17, 2011 | Heating & Cooling

1 Answer

Picture but no sound but when we put headphones in we can hear it whats wrong


without consulting my crystal ball for the type of tv and its features, check rear of unit for external speaker switch, speaker output setting in menu, etc. possible hardware faults include , faulty headphone socket not switching speakers on, faulty speakers etc.

Aug 10, 2010 | Televison & Video

1 Answer

Unit will not play dvd movie on screen. you can hear the sound from the movie and when you load the dvd it says picture off for your safety.


Hi,
You need to park your car to see picture in screen of Sony XAV-A1 because its engaged with hand break/ parking switch in your car.

As you know during driving, it is unsafe to watch movie.
Let me know if you have additional question.
Thanks.

Feb 14, 2010 | Sony XAV-A1 Car DVD Player

1 Answer

The 622 just stops playing, then you hear a


Sounds like a hard drive failure. Contact Dish Network for warranty/repair info.

Dec 15, 2009 | DISH Network ViP622 DVR DTV Receiver /...

1 Answer

No picture


unfortunitly sound is one circuit ,,while all the rest makes a picture. hearing a bang could mean a capacitor exploded, your fly blew up..or even you lost a tube. you need a tech. good luck

Aug 15, 2007 | Philips 60PW9363 60" Rear Projection...

1 Answer

Toshiba tz50v51 popping sound


Possible problems: * The TV set may be unplugged. * A fuse or circuit breaker may be blown or switched off. * The remote control unit (RCU) may be disabled. Solutions: * Make sure the TV/VCR are plugged in and the wall switch is on. * Check the fuse or circuit breaker. Test the outlet with a lamp. * Replace the RCU's batteries: if this fails exchange the unit.

Jan 18, 2006 | Toshiba TZ50V51 50" Rear Projection...

Not finding what you are looking for?
Samsung LN40A650A LCD TV Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...