Question about Kodak Office Equipment & Supplies

1 Answer

After I put new ink in the printer it doesn't print correctly. Black is fine but the color only comes up in pink and blue.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 158 Answers

Take the color cartridge back out then put back in making sure to fully seat it. Also, you could have an old cartidge where the ink has dried. Also after replacing ink you need to calibrate the head via the printer utility program. Speaking of that after you have reseated the cartridge open the utility and see if it has something that says "Clean Head" or something to that effect. If none of that works then return the cartridge where you purchased and get a defective return for replacement.

Posted on Mar 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Put a new color cartridge in yesterday. First pages printed greens instead of blue. Now only prints pink and red. No other color or even black. I ran a test and it comes out ok.


Try cleaning the print head with something like isopropyl. I had a canon that did the same because the machine was fairly old, had a little use that lead to ink drying on the head and blocking the pransmission of the inks to paper. That may be the issue hopefully. Sometimes compatible cartridges cause problems because they are not correctly chipped.

Jun 16, 2015 | Lexmark Z730 InkJet Printer

2 Answers

I have never used the Photo ink Cartridge #58. It intal pic shows putting it where the black one goes-does this mean I would use the color and the photo one at the same time instead of the black one?


Yes correct.The photo cartridge has to be inserted, where you install black cartridge.The photo cartridge gives finishing touch to the photos which you print.The actual photo comes from the color cartridge only, but for lightness and darkness, the color(ink) from photo cartridge gets used.In photo cartridge there are three color ink, that are light pink, light blue and grayish black.In color cartridge there are three color ink, that are pink(magenta), yellow and cyan( blue).------------- This are the details.Thank you for using fixya.

Mar 24, 2011 | HP Deskjet F340 All-In-One Printer

2 Answers

My printer is printing in pink color how can i change it to black


Sounds like your black cartridge is either empty or clogged. Take out the black cartridge and press the print head against a moist paper towel. You should see a nice black rectangle, if you don't you could try placing the print head on a wet paper towel for a few minutes to wick out the ink (ink may seep through the paper towel so beware what surface you do this on). If after this there is still no ink flowing, buy a new cartridge.

Dec 18, 2009 | Office Equipment & Supplies

1 Answer

Replaced cartridges


keep cleaning untill it starts to print clearly, you may reuse the same paper for that purpose, if you don't see any progress after 10 cleans, consider getting lasser printers, they are immune to print head drying and save alot of money on ink replacements. go with brother color or black and white series. I switched and don't have problems anymore

May 20, 2009 | Canon i450 - Printer - color - ink-jet -...

1 Answer

Printer S400 won't print out blue and pink ink


Hi..

The nozzles have gone bad...it needs to be serviced or replaced...i appreciate your efforts yoy put in to fix the problem thats best we can do after all its a machine.if the printer is in warranty contact the manufacturer.

Regards,
debroy

Nov 25, 2008 | Canon S400 InkJet Printer

1 Answer

Hp psc 1510 prints reddish-pink color


the photo come out pink and i buy yesterday can you help me hp 1510

Oct 30, 2008 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

PROBLEMS WITH COLOR NOT PRINTING


pictures are coming out with a green tint

Aug 01, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Hp 970Cse not printing correct colors


Get a new color cartridge or make color adjustments in whatever program you are using to get the printer all fired up. Scotto

Nov 15, 2007 | HP DeskJet 970cse InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5123 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...