Hey i just got this X blade computer a week ago. It's been working just fine other then i have to press F1 to start cause it doesn't recognize. Just today it wouldn't start up freezing on a black screen and has once showed me a blue screen. It has a bios program i dont know how to mess with at all i really need some help fast please

Go into BIOS Setup, and disable the FDD

Regards,
joecoolvette

did you replace your filter and blow out your injectors

panasonic WER961P replacement blades for beard trimmer panasonic er240 cutter replacement parts.

panasonic er240 replacement blades

Hey, greatings from lithuania

i have the same problem. Couple days ago i changed the battery from another sansa clip ant it worked fine, pc recognized sansa again :/ i think that the battery is dead , detailier the microchip wich is on the battery..

while computer starts before pressing f1 key press del key... you will go into the bios of *********** board... you can change these alert settings there... you will have an option that says wait for F1... select NO to that option and save the settings and exit from bios...

i had same problem last week i ended up having to use a recovery disk to format my hd ... i also had the boot sector write message it came up after a while of pressing f1

Your monitor is fine, the problem here is with your computer, and sounds like a virus. Time to competely reinstall windows, or have a tech look at the computer.

hey man, check out this site. it may help.http://powerstrokenation.com/forums/showthread.php?t=19630

To recognize more than 3.5GB RAM you must use a 64 bit operating system
ordinary 32 bit O/S only recognize max of 3.25 to 3.5GB ram

First, try by reinstalling Nero 7. If that doesnt work, it could be that your graphics driver does not have enough built in memory, and you will probably need to replace that. You could try installing the latest version of the driver for your graphics card first..

How much RAM do you have on your system? 128MB should be fine, but I recommend at least 512 MB installed.

Check these first and let me know how it goes..