Question about Clarke Power Products Welding Tools

1 Answer

I need a flowmeater for my clark 180. Where can I find one to fit the little hose

Posted by Anonymous on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 407 Answers


You can use any flowmeter the trick os to take off the original outlet and use a barb hose adapter 1/4" male thread and 3/16" hose barb. You can find all these at your near Praxair store or any other welding store.

If this was useful to you please vote. Thanks.

Posted on Mar 13, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I've got a Bajaj Pulsar 180 dtsi. I want to fit blue colour bulb inside the tail light along with red.

C just need to get a strip of lights strip and it should come with a little battery pack and I think you can tape it in there somehow. He's dubbed double-sided tape

Feb 23, 2015 | 2007 Bajaj Pulsar 180

1 Answer

Aeg aqua control hose fitting

May I have the complete model number, please? so we can get started?

Feb 03, 2014 | AEG Washing Machines

1 Answer

Compressor runs, builds up pressure, but wont come out of hose/???

When the pressure regulator fails, no pressure will be available at hose. Replace the regulator with generic available at Lowes or bypass. To bypass the regulator (this method will give you full tank pressure to hose) remove the safety valve (or gauge if it threads directly into tank) and install a tee fitting. On one side of tee fitting reinstall the safety and the other port is for quick connector. You can also install a regulator here if you would like to save time and the old regulator is difficult to remove. Good luck

Feb 12, 2011 | Clarke Power Products Inc AC2001 2HP 4...

2 Answers

Clarke pro 90 gas mig welder wont penetrate

I have the same problem, please that´s some one knows how to fix this?

Apr 19, 2010 | Clarke Power Products WE6480 MIG95 Flux...

2 Answers

Have Clarke MIG 130 EN. replace Power Cable Assembly 23000054

Your local welding supplier would be you first choice. you will be able to fit an alternative power cable, dosn't have to be Carke,

Jan 22, 2010 | Clarke Power Products Clarke 130EN Mig 110...

1 Answer

631 clark skid steer won't drive or steer the left side? the chain is still on the sprockets.

With all the hyd pressure released, need to unhook the 2 big hoses going to the hyd motor on the chain case on the left side and CAP OFF with fittings. Next start the machine and SLOWLEY move the travel control for the left side a little front and back, you should hear a loud growl from the hydrostat, showing that it is pumping under load. Dont do this long, but enough to test. No noise means the problem is in the hydrostat, possiably bad slipper plate, rotating group or both high pressure relief valves.If you have noise the problem is in the hyd motor. Good luck and be carefull!!!

May 09, 2009 | Bruder Cat Skid Steer Loader

Not finding what you are looking for?
Welding Tools Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Clarke Power Products Welding Tools Experts


Level 2 Expert

50 Answers

Wade Mobley
Wade Mobley

Level 3 Expert

475 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Clarke Power Products Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides