Question about Graco Imonitor Vibe 2791vib Digital Baby Monitor

1 Answer

Hello, My Graco monitor shows a red light instead of the normal green light and it says "discard jetez". It also beeps. What could be wrong?

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I just fixed my unit that had this same problem. You have to re-pair the two units... Turn the parent unit off. Hold the "volume down" button while you turn the parent unit back on. The unit should beep and flash all volume lights. Release the volume button and the press again for ~2 seconds. The volume lights will light up and stay on. Next, turn the nursery unit off and then back on. This should re-pair the two. I hope it fixes your problem!

Posted on Sep 20, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On the front of the monitor all lights are green besides the very bottom one is red. what is wrong


that happens whe the receivers loose the communication with the transmisor

check if everything its well connected or has battery charge

Mar 26, 2011 | Graco Imonitor Digital Baby Monitor

1 Answer

I just bought a second hand baby monitor from graco and they have charged but the one on my room is flashing a red light and continuosly beeps why???


When mine is red I check two things, that it's sitting flat in the charger and that all plug ins on all units are in snugly. The other thing is sometimes the main unit in the babys room is turned off so make sure the switch on the side is on. Hope it helps.

Jan 26, 2011 | Graco Imonitor Digital Baby Monitor

2 Answers

My graco monitor has one red light and a row of green, instead of all green, and it is not making any sound anymore


Try pairing the parent and nursery units again. First, turn off all of the units. Place the broken parent unit within 5 feet of the nursery unit. Turn on the parent unit. Turn on the nursery unit. Within a few seconds, the top 4 green LEDs should shut off. Then you'll hear a few beeps and the connection LED should turn from red to green. If this doesn't work, power off and try again using the AC adapters instead of battery power. I did it without plugging in the parent unit but the battery died as soon as the units paired up again. It's working fine from the docking station though.

Dec 15, 2010 | Graco Imonitor Digital Baby Monitor

2 Answers

I have a Graco baby monitor, it started making a noise for the last 2 days, could it be a battery problem (even with power connected)? The monitor is about 1.5 years old.


Annoying! happens to us too frequently, but this works. We ended up buying a new one and returning our broken one after owning for three months From Manual:) 5. Turn on the Nursery Unit using the On/Off switch on the side. The green power light should come on. 6. Within a few seconds, the Parent Unit will lock on to the Nursery Unit and the top four (4) green LEDs will shut off. A second later, you will hear a series of beeps and the connection LED should change from red to green. Your monitor is now ready for use. 7. If the top four (4) LEDs do not shut off, power off the Parent Unit and the Nursery Unit and repeat steps 4 and 5 above. 8. If the connection LED on the Parent Unit does not change from red to green and the unit begins to beep, press the channel "ch" button on the Nursery Unit. Within a few seconds, the Parent Unit should lock in on the Nursery Unit and the connection LED should change from red to green. You may hear an audible beep during this process. 9. If the Parent Unit is still unable to lock in on the Nursery Unit (connection LED will be red and the unit will beep), power down both the Parent Unit and the Nursery Unit. Wait for 10 seconds then hold the volume down button on the Parent Unit while pressing the On/Off switch. When the unit powers up, you will hear a single beep and all of the soundlights will illuminate. Release the volume down switch and within 2 seconds you will hear two beeps and all of the Sound Light LEDs will stay lit and the bottom LED will be red. 10. Repeat steps 5

Oct 12, 2010 | Graco Baby Care

1 Answer

Red light and beeping as if its not charged but green charge light turns on when i charge it. no sound from babys room


I just fixed my unit that had this same problem. You have to re-pair the two units... Turn the parent unit off. Hold the "volume down" button while you turn the parent unit back on. The unit should beep and flash all volume lights. Release the volume button and the press again for ~2 seconds. The volume lights will light up and stay on. Next, turn the nursery unit off and then back on. This should re-pair the two. I hope it fixes your problem!

Aug 03, 2010 | Graco Digital Deluxe Imonitor Baby Monitor

1 Answer

Base unit appears to be working, but neither of the charged handsets will work. Both are showing red and beeping, but will occasionally go green for a second before going back to red and beeping.


The units aren't paired. Call Graco at 800-345-4109 to have them walk you through pairing it. I'll try to explain what they just walked me through:

-Turn off all units. Make sure nursery and 1st parent unit is plugged directly into wall.
-Hold negative volume down on 1st parent unit. Keep holding it down.
-Press on button on 1st parent unit and let go.
-When you hear a beep, let go of negative volume button on 1st parent unit and then press it again.
-When you hear the second beep, let go of the negative volume button.
-If you have done it correctly, the 1st parent unit should have one red light at the bottom and the rest of the lights should be green.
-Turn on nursery unit and the 1st parent unit should pair with it.
-Repeat the above with the 2nd parent unit.

Nov 18, 2009 | Graco Imonitor Digital Baby Monitor

1 Answer

Monitor Problems


1. check the monitor on other PC if the problem is same that means the VGA cord or the Pins have gone faulty.

2. Just bend and cable and keep monitoring the display where it stablises to normal, and tie thw cacle at that point with something.

Apr 29, 2008 | Computers & Internet

Not finding what you are looking for?
Graco Imonitor Vibe 2791vib Digital Baby Monitor Logo

2,761 people viewed this question

Ask a Question

Usually answered in minutes!

Top Graco Baby Gear Experts

Joyce Nokleby

Level 2 Expert

70 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

john milligan

Level 3 Expert

514 Answers

Are you a Graco Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...