Question about Baby Gear

1 Answer

We've lost our metal/spring matress support that hangs off the hooks on the head/foot boards (very decorative heirloom style). can we find a new or used replacement anywhere. we have a grandson on the way!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 396 Answers

Be very careful with "Decorative heirloom" style cribs. The CPSC (Consumer Product Safety Commision)
at www.cpsc.gov warns that older cribs may be dangerous and not up to current safety standards.
If you look hard enough at flea markets and 2nd hand stores you may find the mattress support but
your crib may put your grandchild's life in danger. It is just not worth it when you can buy a new crib for about $100. If you can fit a soda can thru the slats on a crib, it is dangerous. You only get one life, one child's life and it isnt worth risking. Be safe and I hope you find a safe conclusion.

Posted on Mar 12, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Magnet on lid of soup Mate lost. thus he machine will not start. Magnet is a particular size. Where can I get a replacement? I'm in Perth Western Australia


contact the manufacturer on the net
go to an appliance repair shop and see if one is available
how big is the magnet and will cutting up a fridge magnet help
what about cutting up a magnet from a fridge door seal
just ideas to consider along with magnets from tools , diff plugs
small speakers ( head phones etc)

Sep 14, 2015 | Blenders

Tip

Heirloom 6005 won't do decorative stitches or zig.....


I found out the hard way. If your machine just refuses to do any zig zag or decorative stitches..check the Twin Needle Key. I replaced the mother board at a cost of $400 and then found out that was the problem.

on Mar 26, 2014 | Elna Heirloom Edition 6005

1 Answer

Kincaid Carriage House Sleigh Bed side rail split


This can happen if the bed is not securely fastened together. The headboard/footboard shouldn't be able to shake without moving whole bed.if they do the joints will fatigue and fail from everyday wear and tear weight probably not a factor as the stressor would be vibration of loose joints not weight stress. Is this common? Depends on design. Bed frames that screw tight it is common.frames that snap together not so much as there is nothing to tighten. design flaw seems more possible in that circumstance.

Dec 01, 2013 | Kincaid Carriage House Sleigh Bed

1 Answer

How do I assemble a Bassett crib model 5096-0505? I think I have all the parts. this includes a headboard, footboard, spring mattress support, mattress, two long iron rail support brackets, two sides, four...


where's the manual?
you can assemble it immediately!
have u lost the manual?

you can find the manual here:
Please use the form below to send us an email.
Infant furniture questions to juvenile@bassettfurniture.com


hope you could come to this sites there are many related manners all about mattress:
http://www.bestmattressreviews.com

Dec 06, 2009 | Bassett Mission Crib

1 Answer

I have a status crib which went bankrupt last year and need to find the bottom that holds the mattress.


I lost my bottom during a move. I fixed it by using a "wood" crib board (that holds the matress) and removing the J hooks, replacing it with strong chain about 6 inches long in place of all 4 J hooks, then using the original bolts, putting it through the end loop of the chain, into the crib to hold it firmly and safely in place. It's working safely and perfectly.

Jun 09, 2009 | Baby Gear

1 Answer

No directions to assemble a Simmons crib model 2746 76 219


Most of the cribs that you buy have directions on the bottom of the mattress board on how to assemble. They might not be word for word, but its pretty informative. Hey, it does have pictures! LOL

Apr 01, 2009 | Simmons Mattress Baby Gear

4 Answers

Instructions To Convert Jardine Madison Life Time Crib


To convert your crib to a Full Size bed you will need to purchase a set of full size bed rails (hook style for headboard and foot board). You can find this at any discount mattress store, or furniture outlet, it can range in price from $39.99 - $99.99. To install the rails you will see slots with bars on the headboard/footboard, this is where the hooks on the rails slide into. There are no bolts used to secure the rails to the headboard/footboard.

Jardine enterprises does not make a wood rail kit as was shown in some of the earlier ads for the Madison line of convertible cribs, and do not waste your time ordering the rail kit from Babies-R-Us as it is simply a metal rail kit (which you may be able to get cheaper at a local furniture/mattress store).

Use the lower daybed rail between the two front posts for the foot board. Another option for the full-size conversion is to purchase the metal rails (hook style) for a headboard only and not even bother with a foot board.

If you are still unsure of what you need to do for the full-size conversion please feel free to email me at gistecknician@aol.com.

Feb 21, 2009 | Baby Gear

5 Answers

Childesigns carrollton crib


I am not familiar with this crib, but I have been through many cribs and they all (so far) are adjustable to lower the mattress. You can figure it out by removing the mattress and matress board and inspecting the way the board is connected to the frame. Often there is a bar or rung that sits in a clip or groove at each corner of the crib just below the matress board. You may have to crawl underneath and look up at it. Usually you will be able to lower the platform without using tools, but be sure to take the weight off the platform by removing the mattress and board. Good luck.

Nov 14, 2006 | Childesigns Carrollton Crib

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Dorel UK
Dorel UK

Level 3 Expert

1629 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...