Question about Kenwood Radio TK 260 360 270 370 2100 3100 Compatible Battery

2 Answers

My new used kenwood tk370

Hi ,just reading the form and i just got my new used radio's today .
I turn them on and all i get is error where it on.
I dont know much about programming these units and wondering if you could lend a hand.
All i have is the 2 radio's and the charger.
thanks in advance ,gord.m. vancouver b.c. canada.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

If you have a continuous BEEP on any channel, maybe the seller has just wiped the CH Memory before selling to you. Just reprogram.

If you mean you cant program because software says (Check COM port and settings....) check your COM port selection, Be sure you have the right software.
(Each Radio model has is own programming software).

Also, check if you have voltage at the jack when using a Serial Cable.
Some radio wont program because the regulator for External mic is dead. When there's no voltage available to feed the TTL-RS232 Converter in the cable.
If no voltage is present at the side jacks, no external microphone will work and you'll need to use a Selfpowered USB Cable to program.

Posted on Sep 08, 2012

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

If you have not resolved this problem yet. I fear that your radios may have a CPU problem. in any case here is a URL that explains how to program your radios. http://www.repeater-builder.com/kenwood/field-programming-tk-x70.html

Pat N5SLI

Posted on Aug 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm tryin' to programming kenwood tk 2107 by kpg55d, when i press read data from radio gives me check connection error? please give me help


Hi,

To help you find a solution, you will require the user manual for your radio, if you don't have a copy then try this: join yahoo group SPECIFIC to your radio Make/Model, there is a wealth of info there and you may be able to download manuals, schematics and other stuff for your radio, if available and all this is free.

I hope this helps you to find the solution.

Regards,
Peter

Mar 12, 2013 | Radio Communications

3 Answers

Radio won't recognize my new IPod Nano


hi!!!!

check the cord
or the port of you new ipod

Oct 31, 2008 | Kenwood KDC-MP435U CD Player

1 Answer

Manual for kenwood tk370


Hi,

Manual for Kenwood TK-370, yes please!!!

I don't know wheter you are looking for one or your making one available.

please don't be shy, give as much info as possible, so we aren't guessing.

Cheers,
Peter

May 24, 2012 | Kenwood KNB-17AM, TK-280, TK-290, TK-380,...

1 Answer

Error message on kenwood KDC-237 car radio


no,it need to go on a machine to have code reset or removed,any car stereo store should help

Dec 23, 2009 | Kenwood KDC-MP235 CD Player

1 Answer

Instructions for Kenwood CD Receiver with USB Interface(car radio


CLICK HERE for a PDF version of your manual

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Jul 04, 2009 | Kenwood Car Audio & Video

1 Answer

Kenwood iPod Interface


I have a Pioneer Premier Deck in my van and I get the same problem I just unplug it and plug it back in

Mar 06, 2009 | Kenwood eXcelon KDC-X579 CD Player

3 Answers

Kenwood radio TK270G


HI I'm seeing a different software number...
See: http://www.nielsoncom.com/kenwood/TK-270-370.pdf ( KPG-56D )
One thing you might try is programming off the front panel if "Field Programming" has been "enabled" in the software
See: http://www.repeater-builder.com/kenwood/field-programming-tk-x70.html it's slow coming up but interesting.

Is the transfer cable USB or 9 pin? I know I have had problems with laptops and had to go back to a desktop and it would work fine. I know some of my Motorola programs I have to use a old slower computer because the computer's speed. The new computers won't work with some of the older radio programs. I know my Yaesu VX-7 has the same problem with uploading, I'll get it out today and see what I did to fix it...

Nov 04, 2008 | Kenwood Radio TK 260 360 270 370 2100 3100...

2 Answers

Yaesu Ft-60R with Kenwood TK-3107


ok guys!! i have gold for your prob huhuh
go to this website and u can get anything about all model TK
http://www.twowayradioearpieces.com/Programming-Cable-for-KENWOOD-C178-1.htm

Oct 31, 2008 | Kenwood FreeTalk XL TK-3101 (15 Channels)...

2 Answers

Keewood Protalk 2 way radio xls receives , but doesn't transmit


Hello jf1111,

It could be a low battery. Does the screen go completely blank when you attempt to transmit? Two way radios draw a lot more power when transmitting then when receiving so a low battery might cause the radio to cut out when you press the Push-to-Talk and then the radios might appear to turn back on when you release the PTT. If this behavior persists even after charging the battery then the battery or charger (or both) might be defective.

If the battery isn't the issue then the radio could be programmed incorrectly. Does the problem occur on all channels or just one? The Kenwood ProTalk requires dealer programming with a software kit to set the frequencies for each channel. A channel that is programmed for an out of bounds frequencies would generate an error when the PTT is pressed. You might need to have the programming checked out by your local Kenwood Two-Way radio shop.

Best Regards,
Ken
"Go Ahead. Use Us."

Jun 20, 2008 | Kenwood ProTalk XLS TK-3131 (15 Channels)...

1 Answer

Motorola and Kenwood compatibility....


Hello!! First of all, any radio in the right frequency will work with any other, to work just need the following features: -Frequency, 154.700 which is correct as you said. - the Squelch code, this could be PL or DPL. The XV2100 has a table of codes that you can try, as you dont know this code form the Kenwood, you will need to check one by one. If you have the chance to send the Kenwood to some to "Read" the radio parameters( freq.,Code, ETc) you can look those parameters on the XV. Hope this can help, any comments neto-rola@hotmail.com Good Luck

Jan 20, 2007 | Motorola XV2100 (1 Channel) 2-Way Radio

Not finding what you are looking for?
Kenwood Radio TK 260 360 270 370 2100 3100 Compatible Battery Logo

673 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1654 Answers

michael galang

Level 2 Expert

138 Answers

Jason

Level 2 Expert

211 Answers

Are you a Kenwood Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...