Question about Canon PIXMA MX700 All-In-One InkJet Printer

1 Answer

Error code 5100 i have turned off machine, unplugged at electrical source. After 30 min replugged in to electrical source, turned on printer. Pressed print button. Machine processes for a few minutes then error code 5100 appears on screen.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 287 Answers

Hello and Welcome

Error 5100 means that the cartridge can not be detected by the printer.
Actually the printer is not actually loading the cartridge and showing you the error 5100.

To solve these follow the following steps. I hope it works

  1. Turn off printer
  2. Remove both the cartridges from the printer
  3. Use a clothe moistened with alcohol to clean the surface contact on the cartridges where the terminals inside the printers touches
  4. Return the cartridges
  5. Turn on the printer.
Error will be removed

Further assistance i am here to help

Please don't forget to click on Four thumbs which are given below if it is helpful
THANKS & Keep Using Fixya


Posted on Mar 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 01241 on singer quantun XL 6000 ??


unplug machine for 5 min and replug into electrical outlet. resets it.

Feb 18, 2015 | Singer Quantum XL-6000 Computerized Sewing...

1 Answer

50.0 fuser error


Hi,
SOLUTION: Follow the steps listed below:
  1. Turn the printer off and unplug it for 30 minutes; then turn the power back on.
  2. Try a different power cord. DO NOT use extension cords to plug the printer in.
  3. Remove the surge protector or UPS/CVT device and connect the printer directly to a power source.
  4. Try a different electrical circuit. There could be an issue with the line voltage going into the printer from the power source.
  5. Turn the printer off and unplug it. Let it sit for 30 minutes to let the fuser cool off. Carefully remove the fuser; IT MAY STILL BE HOT USE CAUTION. Examine the fuser, if any damage is apparent the fuser may need to be replaced. If no damage is noted reinstall the fuser, plug the printer back in and power it up.
For More info Source... Hp Error Code 50 Service Errors 50 Fuser Printer Repair

Thanks,
HP Printer Support

Jun 26, 2014 | HP LaserJet Pro P1102

1 Answer

Service error 5100 and 6000


Canon tells you to unplug the machine without the head in for 30 minutes.
Replug into outlet and cross fingers./
If that does not work you may need a new printer

Feb 11, 2014 | Canon PIXMA iP1800 Printer

2 Answers

My Whirlpool Duet Front Load Washing Machine is showing a F28 error. What does that mean?


F28 is a communication error which usually means there is a connection that has come loose. Removing the top and unpplugging and replugging the connectors in will fix 75% of these codes. If the bottom toe panel is not on it will also give you an F28
  • Unplug or turn the circuit breaker off for 30 seconds.
  • Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
  • Press the Pause/Cancel/Stop button twice to clear the display.
  • Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts if you have any further questions message me back and please remember to rank how this opinion has helped in your appliance situation when our chat has concluded Thanks again Rick
  • Jan 16, 2011 | Whirlpool Duet GHW9150P Front Load Washer

    1 Answer

    Have a kenmore elite he3 which stops the cycle w/ 40 min. remaining and flashes back and forth the 2 initials ''F'' and ''H'' on the screen. Don't have a manual to check


    If the control has turned on the fill valve and after 8 minutes the flow meter has detected 10.5 gallons of water and not detected a pressure switch trip, the valve will be turned off and the failure code will flash in the display.
    1. Unplug the washer from its electrical source and wait for 30 seconds.
    2. Replug the cord into the electrical source and try to start a normal cycle or a cancel drain cycle.
    3. The machine should start the pump out mode and empty the water.
    If, after 30 second, the machine has not detected water entering into the machine, the valves will be shut off and the failure code of FH will be displayed.
    1. Check all hose connection and valves, both hot and cold, are turned on completely.
    2. Verify that water is at the fill hose connections at the back of the washer.
    The main control has sensed a component failure in the machine and will be needing a diagnostic visit for a possible repair or replacement.
    DrakeTech

    Feb 23, 2010 | Washing Machines

    1 Answer

    Service Error 5100 Prints part of page then stops. Tried the suggested solution by Canon at the time of service error notice (turn printer off then back on, unplug from power source then replug, etc.) to...


    5100 is a carriage error, usually caused by grease on the clear encoder strip behind the carriage assembly. You can clean the strip with a damp Q-tip just damp with plain water.

    Nov 25, 2009 | Canon PIXMA iP6700D InkJet Photo Printer

    1 Answer

    Error 5100


    1. check the user manual if you had one for that error code,
    2. and I suspect the ink level of your printer,
    3. and also check if there is any paper jam exist,
    4. disconnect the power source for 2 mins and turn on again.
    5. try to print again.

    Apr 01, 2008 | Canon PIXMA MP510 All-In-One InkJet...

    3 Answers

    Error code 5100


    Error code 5100 /this error is an error within the printer. This error means that there is
    something obstructing the printing process. Check inside your printer through the gears that
    you can see under the lid. There should be something obstructing the gears such as dirt or
    in my case popcorn. Check VERY thoroughly.

    Mar 23, 2008 | Canon Pixma MP500 All-In-One InkJet...

    Not finding what you are looking for?
    Canon PIXMA MX700 All-In-One InkJet Printer Logo

    640 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Canon Office Equipment & Supplies Experts

    kakima

    Level 3 Expert

    102366 Answers

    old marine
    old marine

    Level 3 Expert

    1921 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...