Question about Panasonic PT L735U Multimedia Projector

1 Answer

After tuning on PLT735U, we get proper display and then less than 10 seconds later, it shuts down.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 100 Answers

Do any of the lights turn a different color or blink? Please let me know as this can tell me more specifically what is happening.
Many time projectors turning off like this can mean overheating.

  • Check the filter on the projector, this is usually behind a small plastic piece that is held in place by a small clip
  • Carefully wash the filter and let tap dry with a paper towel. Be sure to have it completely dry before replacing it.
  • Make sure all of the other opening on the projector are free of dust/dirt as this will restrict airflow as well

I little dust will do a lot of harm, keep it clean and you should be all good.

The full manual fo the unit can be located here:
http://www.ferris.edu/TAC/LabsClassrooms/documents/PTL735U_manual.pdf


I hope this helps,
Magoo

Posted on Mar 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my dryer shut down before the clothes are dry?


Bill, probably a bad moisture sensor, if you can locate sensor you may be able to clean it. See links below for more info.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.partselect.com/Repair/Dryer/Shuts-Off-Too-Soon
What to Check when your Dryer Shuts Off Mid Cycle

Appliance Repair Forums

Clean Your Dryer Moisture Sensing Electrodes to Ensure Proper Automatic...

Mar 03, 2016 | Whirlpool Dryers

Tip

HELLO TUNE TRICK FOR AIRTEL( legal)


<b>hi Guys...<br />im 1st tym posting mah Trick Which im using from Last 2 months...<br />THIS TRICK HELPFUL FOR THOSE WHO MAINTAIN LOW BALANCE ON PHONE (LESS THAN 10/-)<br /><br />WITH THE HELP OF THIS TRICK U CAN USE HELLO TUNE FOR 10 DAYS @RS 5 ONLY...<br /><br />Now trick is here...<br />.<br />Keep balance app. To zero.. keep balance rs 1 or less than 2...<br />Now call 578785 (toll free) and acticate ur Favorite Hello Tune...<br />after activating.. Ur balance goes to minus 5 (-5)..<br />Dats it...<br />UR HELLO TUNE WILL BE ACTIVATE FOR 10 DAYS... (15 + 10 for just 5 rs.)<br />NOW RECHARGE.. Airtel wont charge u anything later...<br />..<br />.<br />now when ur 10 days are going to over Reduce ur Balance to 1 or less Than 2..<br />Keep ur balance low untill Ur Hello Tune subrcription renew..<br />After 10 days airtel again do ur balance to -5 and renew ur hello tune for 10 days...<br /><br /><img src="smile.gif" /><br />Thats the 100% legal trick.. Working 100% in delhi...<br />Im using it for last 2 months...<br />Enjoy...<br />And reply if its working in ur state or not.??<br />Hit thanx for my work...</b>

on Jan 29, 2011 | Cell Phones

2 Answers

Revs up and down and shuts down will not idle cold


tuned up is it, (spark parts, filters?)
stalls? hot and cold or only cold.
or due to stalling cold can never get engine hot to 180F.?
there are over 50 causes, the tests are 10x less.
1: can you save the stall with a fast right foot.???????
and what size engine?

May 06, 2015 | 2002 Isuzu Rodeo

1 Answer

Nuvico nvjv 4000 beeps and shuts off


sometimes these will go into an automatic sleep mode and will restart once you power it down and restart..

Jan 19, 2014 | Nuvico NVJV-4000N Video Recorder

1 Answer

Error.6500


If the device is not functioning properly or to clear memory, reset it.
1. On the operator panel, press and hold the ON/OFF button for one second. (The display will go blank.)
Note: It may be necessary to unplug the power cord if pressing the ON/OFF button does not shut off the printer.
2. Wait approximately ten seconds and then press the ON/OFF button again.
3. Wait until the device has completed its cycling process before submitting another job request.
or
To clear error messages displayed on the LCD or if the printer is not functioning as expected, it may be necessary to simultaneously press Stop/Reset and ON/OFF buttons.
1. With the printer powered on, press and hold down the Stop/Reset button then press the ON/OFF button.
2. Once the printer is powered off, hold down Stop/Reset and then press ON/OFF.
or
The 6500 error can be something that needs repair or complete replacement as well. If your printer is less then 12 months then you can contact Canon Tech support for repair or replacement under warranty.
For toll-free technical support*, please call 1 (800) 828-4040 during regular business hours (currently Monday-Friday 10:00 a.m. - 10:00 p.m. EST, excluding holidays).

Nov 22, 2009 | Canon PIXMA MP170 All-In-One InkJet...

2 Answers

Monitor turns on for less than a second, then off. I bought a 19" Samsung LCD monitor (953BW) about 10 months ago and the first time I used it, it would only switch on for a split second and shut down. ...


Although the OP was 2009. I had this problem.

I simply replaced the power board. Which I bought from ebay for $20AUD.
It was real easy to remove as well. Just have a look for youtube videos.

Fixed!

Aug 31, 2009 | Samsung 953BW LCD Monitor

2 Answers

Come on, boots up, then shuts down 5 - 10 minutes later.


check your power options make sure you don't have hibernation enabled, its in the system control panel. try booting from a linux live cd like Ubuntu which you can download for free. If it runs fine under linux, its a windows problem, if it keeps shutting down its a hardware problem. Could be bad ram, or CPU overheating.

May 09, 2009 | Computers & Internet

1 Answer

My t.v. shuts off after a few minutes


try this link...it tells you what the LEDs indicate. Apparently the cover on the back is not sealed properly, my guess is that it is a fan not working properly or some other reason the set is overheating.

http://downloadcenter.samsung.com/content/EM/200604/20060404091311750/EN/3_sub.htm

Oct 31, 2008 | Samsung HL-S4266W 42" HDTV

2 Answers

MyFi loses proper index to recorded music


Sometimes this will fix itself if you take the battery out. Otherwise, the best way seems to be to empty the memory, and start all over, recording on a blank slate. These are really pretty awful machines, with endless problems.

The on/off switch on mine just broke, and I say "good riddance."

Feb 03, 2008 | Delphi MyFi SA10113 XM Radio Receiver with...

1 Answer

TV keeps on trying to auto tune


I would try first unplugging the set for about 30 seconds to see if that clears up the problem. If not, then it could be anything from a bad connection or component inside the set, and with it being made by a 4 letter word company, pitch it and get a different brand set. Check out epinions.com before plunking down the money on another model first. May save some headaches later.

Dec 19, 2006 | Sony FD Trinitron KV-28FQ75 28" TV

Not finding what you are looking for?
Panasonic PT L735U Multimedia Projector Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...