Question about Samsung SF-565P All-In-One Laser Printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have an SF-555P and have installed numerous cartridges. The last one was a Samsung brand and it didn't have the little fuse taped on the top. I never knew what this was fur until I had problems. When I first installed the new cartridge the "Toner Low" display remained lit. I shook the cartridge and it persisted but it printed well. Then about 100 pages later I got the "TONER EMPTY" and the printer stopped. After researching the issue I found that the fuse is actually a reset for the printer counter and when the new cartridge was installed without the fuse, it never reset.
You will need a 5X20 Fast acting fuse, no greater than 315 ma. You can buy a 4 pack from Radio Shack for about $3 (P N 2701046). Install it with a piece of electrical tape in the slot on the toner cartridge and make sure the contacts are exposed. The printer will blow the fuse and reset the counter. Don't use a bigger fuse, a slow-blow or anything that won't burn open quickly or you will be buying a new printer.
Posted on Aug 16, 2010
SOURCE: have a cru fuse error
CRU stands for "Customer Replaceable Unit". If the fuser was brand new, then you got a bad power supply board. The hassle of replacing both parts is not worth the money. Sorry.
Posted on May 28, 2008
I'm guessing that it''s remanufactured?
There is a small fuse on the front of the cartridge that may have not been replaced (or not installed at all). This is required to reset the toner unit - it basically blows at installation.
You can try this -it applies to another similar model, but may work for your as well to reset manually:
Press "Menu"....1934 (you may have to press "#" before the number??)
display will read something like "Tech mode"
Keep pressing "Menu" until displays "new cartridge"
Then press "yes", or "ok" or whatever applies to reset.
Please rate me
Posted on Mar 31, 2009
Tips for a great answer:
Nov 02, 2013 | Samsung SF-565P All-In-One Laser Printer
Mar 02, 2011 | Samsung SF-565P All-In-One Laser Printer
Feb 18, 2011 | Samsung SF-565P All-In-One Laser Printer
Mar 18, 2010 | Samsung SF-565P All-In-One Laser Printer
Dec 22, 2009 | Samsung SF-565P All-In-One Laser Printer
Nov 02, 2009 | Samsung SF-560 Plain Paper Laser Fax
Sep 23, 2009 | Computers & Internet
May 13, 2008 | Samsung SF-565P All-In-One Laser Printer
Feb 05, 2014 | Samsung SF-565P All-In-One Laser Printer
171 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: