Question about Standard (CRT) Televisions

1 Answer

Adjusting TV Volume

We are a 120 room hotel. We would like to program the volume on our t.v.'s so they are all set at the same level. We just bought a master remote for the Zenith Concierge H2534Y3 t.v.'s we have. When we press menu there is no way to preset the volume control.

Joe Ruiz
Best Western Socorro Hotel and Suites

Posted by on

  • BWSHS Aug 01, 2008

    This information was very helpful. Thank you for your help.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 78 Answers

Hi Joe,

If you do not have it available, you can access the user guide for this product at http://www.zenithservice.com.

Page 29 should be the beginning of instructions on using the installer remote. Reference the chart to find the menu line for start channel/volume. Depending on your set, this may be on line 10 or 11. You also may find options for minimum or maximum volume, as well as many other settings using this chart.

The next page gives specific information concerning this feature. The number you enter into this menu line determines the channel (with 0 being Aux and 255 turning the feature off). Volume is determined by actually setting the volume when on this menu line.

Hope this helps,
Jason,
Go Ahead. Use Us.

Posted on Jul 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a way to set the volume so i dont have to keep changing them all the time


hello, are you referring to the volume of the TV set when you change channels? to reiterate every time you change channels the volume also changes? in this case I do not want to speak too much but I'm almost certain that television providers are required to adhere to a volume leveling standard which would require television broadcast stations to broadcast at a certain volume level for unity. Are you watching cable television? I happen to know that not all cable television providers level they're broadcasting some do.I notice that you are using a CRT unit are you attempting to use a converter box with the unit? If you are using a converter box there may be a chance that volume level is one of the options in the menu, I can not say there is much at all you can do about this.
As an alternative your television set maybe damage and the volume maybe adjusting randomly or in a way other than intended.

Good luck and thanks
Questions? Just ask!

Nov 25, 2015 | Standard (CRT) Televisions

1 Answer

MY PANASONIC CT-36HL43G HAS A PROBLEM WITH THE VOLUME. IT ONLY SHOWS UP TO 63 ON THE SCREEN AND THAT ISN'T LOUD ENOUGH. ANY ANSWERS ?


Volume might be locked at "level 63". Refer its user manual to get details about how to unlock the volume. If the set is in Hotel mode, this might happen. If you wish to get out from Hotel mode to Normal mode [if it is so] you have to enter its service mode option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.

Oct 25, 2014 | Standard (CRT) Televisions

1 Answer

My hotel tv turns on to 66, how do i get it to turn on to channel 3


Most hotel sets have a master remote for setting up channels, volume levels, picture settings, etc. You will have to get a master remote for this adjustment. Thanks for using fixya.

Nov 14, 2009 | Standard (CRT) Televisions

1 Answer

The sound level is significantly lower when I switch from the TV to the DVD player. I've connected just as the manual says.


Assuming it's a fairly modern (10 years or less) TV, somewhere in the settings menus you should be able to find a setting for adjusting the relative volume of the input that you've connected the DVD player to, e.g. Scart.
If you can find it, adjusting this setting should help.
If not, may be stating the obvious but is the DVD volume set very low ?'

Sep 22, 2009 | Standard (CRT) Televisions

2 Answers

My tv was purchased from a hotel and the volume is 'locked' at the mid-point. how can i fix it?


you cant. these tvs are manufactured like this to keep the volume at an acceptable level so that this tv volume does not disturb the next room. Unless this tv has an audio output (red, white) to output the tv audio to an external audio source such as a surround sound system then the volume is what is. Altough a good buy a tv is from a hotel it comes with limitations. Take it to pawn shop to sell then buy another tv not from a hotel.

Aug 15, 2009 | Zenith B36A24Z 36" TV

2 Answers

Concierge Hotel TV - Volume Control


If there are no chasis numbers on the outside you may want to open the cast and check for numbers there. Then you might be able to google the number and find a manual. some TV's willl enter the menu or rest by pushing two buttons at once on the set. This could change your channel selection however.

Nov 14, 2008 | Standard (CRT) Televisions

2 Answers

Headphones for tv


Roy, easy way to do that is go to wally mart, K-mart sears etc. and get a set of "rca wireless headphones" they are inexpensive and the headphones have a volume control built into them so you can have it as loud as YOU want, and the wife can set the volume on the tv where she wants, bought a set for my father-in-law and he loves them, (he`s very hard -of -hearing) you can even walk out of the room with them on and still hear the program, buy them for yourself as a christmas present, enjoy, BMW Rider

Dec 07, 2007 | Standard (CRT) Televisions

1 Answer

Bush 22" LCD TV


Hi.

What is the TV model number ?

Nov 29, 2007 | Bush 5693D 24" TV

1 Answer

Philips tv


you probably need a hotel master remote, i.e. the philips rc2573gr:

http://salestores.com/philipsr.html

Oct 17, 2007 | Philips 36PT41B TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68197 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...