Question about Zenith MBR3447 Remote Control

1 Answer

How do i program my remote - Zenith MBR3447 Remote Control

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

Hello;

Without knowing the codes for the specific brand names and models of your devices, this is how you program the Zenith MBR3447 for your TV, VCR, DVD Player, CD Player or Audio Receiver:

TV

1. Push the "Power" button on the TV to turn it on.
2. Press and hold the "PRG" button in the upper left corner of the remote. Release when the indicator light, located in the top center of the remote control, comes on.
3. Push the "TV" mode key located at the top of the remote.
4. Enter 0 -- 0 -- 0 on the remote's number pad, then press the "Enter" button.
5. Aim the remote control in the direction of the TV's IR sensor and push the "Power" button. Pause a second. If the TV fails to shut off, push the "Power" button again. Repeat until the TV does shut off. Each time the "Power" button is pressed the Zenith MBR3447 tries using a different TV device code from its code library to turn the TV off. Therefore, when the TV finally does shut off it's an indication that the remote is temporarily programmed with the correct device code to control the brand of TV you're using.
6. Press "Enter" to save the current code.

VCR

1. Push the "Power" button on the VCR to turn it on.
2. Press and hold the "PRG" button in the upper left corner of the remote. Release when the indicator light, located in the top center of the remote control, comes on.
3. Push the "VCR" mode key located at the top of the remote.
4. Enter 0 -- 0 -- 0 on the remote's number pad, then press the "Enter" button.
5. Aim the remote control in the direction of the VCR's IR sensor and push the "Power" button. Pause a second. If the VCR fails to shut off, push the "Power" button again. Repeat until the VCR does shut off. Then press "Enter."

DVD Player, CD Player or Audio Receiver

1. Push the "Power" button on the device your programming the remote to control to manually turn it on.
2. Press and hold the "PRG" button in the upper left corner of the remote. Release when the indicator light, located in the top center of the remote control, comes on.
3. Push the "AUX" mode key located at the top of the remote.
4. Enter 0 -- 0 -- 0 on the remote's number pad, then press the "Enter" button.
5. Aim the remote control in the direction of the device's IR sensor and push the "Power" button. Pause a second. If the device fails to shut off, push the "Power" button again. Repeat until the device does shut off. Then press "Enter."

Posted on Mar 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you program it to a GE universal remote


these are the codes
LG: 004 005 009 012 050 057 080 156 227 338

  • How to Program a GE Universal Remote ' Techwalla https://techwalla.com/content/program-ge-universal-remote Lost your Remote? Need help programming your GE Universal Remote? Most TV's, VCR's, DVD Player's, Cable and Satellite Boxes will work with a GE universal...
  • How to Program GE Universal Remote: Quick Steps www.brighthub.com > Electronics > Home Theater > Home Media 2011-04-18 · How to Program GE Universal Remote Using the Code Search Function. If you've tried the codes listed for your device brand and are unable to get your ...
  • GE Universal Remote Codes and Instructions ' direcTutor www.directutor.com/content/ge-universal-remote-instructions Goto GE remote Codes. Direct Code Entry for GE remotes with 4 digit codes. 1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
  • How to Program a GE TV Remote ' Techwalla https://techwalla.com/content/program-ge-tv-remote GE universal remote controls allow users to program multiple devices onto a single remote. The remote control uses codes to detect the device, and you can...
  • GE Universal Remote Quick Start Guide - YouTube Youtube
    • BY JASCOPRODUCTSCOMPANY
    • 3 MIN
    • 216K VIEWS
    2013-04-18 · Video embedded · http://www.jascoproducts.com Eliminate remote clutter with GE Universal Remotes
  • How to Program a GE Universal Remote Control ' eHow www.ehow.com > Tech > TVs > Remote Controls
    • BY EHOW ELECTRONICS EDITOR
    Programming a Jasco/GE Universal Remote Control takes about seven steps. As with programming other remotes, you need to know the code of the component you are ...

  • May 09, 2016 | LG "32"" inch New 2011 HD LCD TV With HD...

    2 Answers

    Code for programming to a LG 4K tv?


    1. LG UHD 4K Television - LG.com‎

      Adwww.lg.com/UltraHD4KTVRatings:Reliability 9.5/10 - Picture quality 9.5/10 - Features 9.5/10
    Search Results

      Find Your Comcast Remote Control Programming Code

      customer.xfinity.com/...tv/finding-your-remote-control-programming-co...
      Learn Comcast remote codes and more information on how to program your remote control. ... To Watch On Demand Programming with XFINITY TV:.

      DIRECTV - Remote Control Code Lookup

    Jan 01, 2016 | LG Televison & Video

    2 Answers

    What is the code for programming universal remote for philips 19 in tv model 19PFL3504D/F7


    How To Program A Philips Universal Remote ' Codes For ...

    codesforuniversalremotes.com/program-philips-universal-remote/
    Here is how to Program any Philips Universal Remote Control. Turn on the device you ... Remote Control Codes December 21, 2015 at 1:19 pm. Stephanie,

    Codes For Universal Remotes ' Universal Remote Control ...

    codesforuniversalremotes.com/
    Universal Remote Control Codes For TV & Audio. ... Codes for Philips Universal Remotes · Sanyo TV Codes for Universal Remotes · Codes for .... I have an 19 inch Emerson flat screen and a RCA universal remote. Please help with the code ..

    Dec 28, 2015 | Philips Televison & Video

    2 Answers

    Mediacom 1056B03 remote control code to program a sony blu ray player


    Thanks! Code 1516 worked to program my sony bdp :)

    Feb 11, 2013 | Televison & Video

    2 Answers

    Program RCA universal remote with Panasonic TV


    If you have the owner manual for the remote try all the panasonic codes or google for that with the model number of the remote--not all remotes will program for all models and if programs it may be missing key features the original remote had.

    Nov 04, 2012 | RCA Universal Remote Control

    2 Answers

    How do you re-program a remote to a television?


    Check online. Go to google type in what kinda of remote it is. Type in program codes for ''''''' your remote''''' and instructions on re-programming. They usually have all the guides online for the remote controls.

    Dec 06, 2010 | Televison & Video

    2 Answers

    I'm trying to program my sansui tv with my universal remote


    Instructions for programming your RCR311B can be found here ...
    http://audiovox2.info/docs/rca_acc/man/RCR311BN_DOC_OM.PDF

    Aug 15, 2010 | RCA RCR311B Remote Control

    1 Answer

    Can only program one remote or keypad. which ever


    You are going to have to do a process of elimination. I think you have either a bad remote or a bad keypad. Try programming a remote and then the keypad. If only one works then go with the other remote and the keypad. If only one works then program the two remotes. If the two remotes work then the keypad is bad or if you can program one remote and the keypad then the other remote is bad. Get rid of the bad one.

    Oct 08, 2009 | Sears Craftsman LiftMaster Chamberlain...

    3 Answers

    Program my remot


    http://www.directv.com/learn/pdf/System_Manuals/Hughes/HNS_SD_HBH.pdf
    remote programming instrutions start on page 49 of the PDF file and give step by step instructions for programming your remote

    Feb 26, 2008 | Hughes HRMC11 Remote Control

    Not finding what you are looking for?
    Zenith MBR3447 Remote Control Logo

    682 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Zenith Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    74106 Answers

    matt martin
    matt martin

    Level 3 Expert

    1210 Answers

    Computer Repairing
    Computer Repairing

    Level 3 Expert

    14641 Answers

    Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...