Question about Asko W620

1 Answer

Water inlet valve problems

I have a w620 that the tub keeps filling up when not in use, and it just started filling really slowly and not washing the detergent into the tub. I assume the inlet valve/solenoid is failing, is it possible to get parts for this washer so I can repair it myself?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Repairclinic.com has parts available.

Posted on Aug 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishwasher slowly fills after cycle


If water slowly fills in the tub when not in use.

a) Most likely your machine inlet water valve not seating properly and closing. Change the machine water valve.

b) May be sink drain water back flowing to the tub. But you have checked that.

So it has to be the machine inlet water valve.

Apr 11, 2015 | Whirlpool Dishwashers

1 Answer

Set it going, fills up ok, goes through washing cycle but after spinning and then filling up for next cycle it overflows


Rather hard to understand your problem from the wording in the question but what I understand to be the case is that your tub fills up with water and overflows after the cycle is finished. Perhaps overnight water slowly fills the tub. This is due to the water inlet valve not shutting off all the way. The Inlet valve assembly needs to be replaced.

Apr 27, 2011 | Washing Machines

1 Answer

The water level selector of my whirlpool white magic-splash washing machine is causing problem..it does not stop the water at the desired level..the water keeps on flowing into the tub and then overflows...


PRESSURE SWITCH
Your pressure switch stops the water and allows it to start the next cycle. It's a switch either in the control panel or at the top of the tub with a small tube connected to it which goes down between the inner and outer tub. As the water level increases the air in the tube is compressed until there is enough pressure to "make the switch" stopping the water from filling. This tube can get clogged and the switch won't work. Remove the tube and clean it out. Blowing on the tube when it's still connected to the switch will make the switch if it's working and clear.

Water inlet valve

If it fills with water and starts the cycle and the water keeps running in then your water inlet valve on the back where the water supply comes in is sticking. It needs replacing.

Mar 09, 2011 | Whirlpool Washing Machines

1 Answer

Water filling up slowly in the tub


The problem can actually be caused by the water inlet valve leaking by, or a faulty pressure switch. Both are fairly simple to replace. The following link explains how to diagnose the problem:

http://www.fixya.com/support/r3753262-front_load_washer_fills_when_not_in_use

I have included steps on how to replace both parts, and web resources to search for replacements. If the model number is correct, the replacement part numbers you may need are:

Water Inlet Valve - 8181694
Pressure Switch - 8181695

If you have any questions about this repair, please post back and let me know. I hope this helps you.

May 19, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Keeps filling up with water even on spin


Close the water supply valve and allow the machine to completely drain the water from the tub. Turn off the machine and disconnect it from the power outlet. Open the water supply valve. Replace the water inlet valve if water drips into the tub when the machine is off.

Start a new cycle if the machine stops filling when it is off. The control board or the water level switch is malfunctioning if it keeps filling even during the spin cycle. Indicate the model number for proper troubleshooting and repair assistance.

Feb 05, 2010 | Washing Machines

2 Answers

Water doesn't stop filling tub and tub overflows


the water level sensor is not working and needs to be replaced

Aug 31, 2009 | Washing Machines

1 Answer

Leak


Your inlet water valve where the fill hoses attach is stuck open.

Mar 18, 2009 | Washing Machines

1 Answer

Washer trips circuit while filling tub


Sound like the inlet valve coil may be shorted. Remove console and check wires from water valve to control. If wires look ok, the inlet valve has a problem

Mar 18, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Slow water delivery into machine


Check to see if there's good water volume coming through the hoses attached to the washing machine. If there is, check to see if the screens inside the water-inlet valve are clean. (The water-inlet valve is the device on the washing machine that the fill hoses are attached to.) If they're clean, you probably have a defective water-inlet valve. If so, you should completely replace the valve.

Q - My washer fills slowly with water, what can I do ?
A - Two things could be your problem...
1) - sometimes the screens in the fill valve or inside the ends of the fill hose get clogged up...use a tooth brush to clean them out. Don't forget to shut off the water first before removing the hoses to check for this.
2) - The fill valve itself may not be opening fully = time for a new fill valve.

Mar 14, 2009 | Fisher Washing Machines

1 Answer

Kenmore 80 series model #110.26882503 fills slowly


Yes, the only other thing I would do and you may have done this is to put the hose directly over in the washer tub and turn the water on to check the flow. If that's good then replace the water valve.

Dec 08, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Asko Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you an Asko Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...