Question about LG 32LD350 32 in. LCD TV

1 Answer

New LG 32LD350 - Allowed TV to auto-program channels, and for some reason, it skipped past channel 4 during the tuning process. When I select channel 4 in the tuning options, it comes up as no signal. On the old TV, channel 4 came in just fine - it is a local station that we have gotten for years. Other TVs in the house connected to the same antenna get channel 4 clear as ever...Any thoughts?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 635 Answers

When you are auto tuning the system will not store a channel which is week by its standard ( at least 60% signal strength ) This done to avoid grainy picture and hissy sound.
You can go into manual tuning and store it.

Posted on Mar 11, 2011

  • T?th L?szl?
    T?th L?szl? Mar 30, 2013

    My set in manual tuning sows for a moment signal sterngth and normal quality, but while I want to add channels the signal disappears and so on again. Antenna is perfect, other set works well. The analog channels are normal.

  • T?th L?szl?
    T?th L?szl? Mar 30, 2013

    ..my 32LD350 2 and a half years old :-( .

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If there is no channels after scanning is it the outside antenna?


Do you see any channels [as a glimpse], during auto-tune. If you see them for a moment during channel auto scan, and do not store them in the TV memory, after the channel scan has been finished; the fault is with the TV itself. If you do not see that glimpse of programs during channel auto scan, there are two possibilities.
1. The tuner of the set is faulty.
2. The set do not get any signal to process [might be antenna].
http://electronicshelponline.blogspot.com/

Aug 14, 2016 | Televison & Video

1 Answer

Why does 32ld350 not find channels after i used RCG input?


There's no reason. The two things are not connected. Make sure you have the TV on the digital tuner, and not the analogue one.

Sep 07, 2014 | LG 32LD350 32 in. LCD TV

2 Answers

All channels permanently deleted accidently, can I restore them


Auto tune the channels as found in the manual
  1. On your remote, press Menu.
  2. select Channel and press OK on your remote.
  3. select Auto Tuning and press OK on your remote.
  4. select Yes and press OK on your remote.

Nov 10, 2013 | LG 32LD350 32 in. LCD TV

1 Answer

Toshiba Freeview Tv, Model 19A 615 DB. Re-tuning I pressed Menu, Set-up, Restore Defaults, then Yes to delete previous settings, and OK. Absolutely nothing happens, Help please?


hi,
To Re- tune your TV you have to go to the Auto tuning option in the menu. do the following procedure for auto scan all the available channels.

To tune the free view analogue channels do the following procedure.

1. Press the Menu/setup button on the remote.
2. Select Auto tuning and press enter.
3.Select the country and press enter.
4. Select start and press enter.
The automatic tuning will search for available broadcasts and should store the channels in the correct order. During the search the sound is muted. When all programs have been stored, the normal TV screen will appear.
If you can sent your email address through fixya then i will sent the user manual for Toshiba 19A 615 DB.
ok
.

Sep 07, 2011 | Televison & Video

2 Answers

How to tune channels first time when you purchase a new Sony Kdl 32EX600 LED tv?


Hello
Do connection to the antena if you wants to set the TV auto tuned.
During this initial setup, you can perform the following:

1 Select the language for the on-screen display text.
2 Select HOME or Retail mode. [Here you have to select "Home" mode if the set displays "Retail"

3 Connect cable or antenna, then select OK to run Auto
Program

• If you have cable and antenna available, please connect cable first.

• IMPORTANT: Auto Program is only effective when cable or

antenna is connected. If you cancel Auto Program before completion some channels may not be
available.

4 Auto Program will scan for available channels from the signal source directly connected to

the TV's CABLE/ANTENNA input and may take sometime to complete the process. Follow
the help text provided on the screen to run Auto Program.
OK.

Feb 23, 2011 | Sony KDL40EX600 TV

1 Answer

How do I tune a sony trintron without a remote


Hello
You can autotune your Sony TV without a remote control. Fist connect it to an external antenna or cable whatever may be, to its antenna socket at the back side.

After you have finished connecting your TV, you can use Auto Program to set up your

channels. During Auto Program, the TV will automatically search for available channels and
program receivable channels.

[1] Press POWER button on the TV to turn it on. The Initial Setup screen appears.

[2] Press CH+ button on the remote control or on the TV front panel to start Auto Program, or press CH-- button to exit.

The Initial Setup screen appears each time you turn on the TV until you perform Auto Program.

To perform Auto Program again

1 Press"MENU" button on the front panel of your TV.
2 Press "RIGHT ARROW button to highlight Channel Menu.
2 Press DOWN ARROW BUTTON to highlight CABLE or ANTENNA AND PRESS [+} to select.

4 Press UP arrow or DOWN arrow to highlight On or Off according to how you connected your TV. Press [+] to select.

4 Press F or f to highlight On or Off according to how you connected your TV. Press to
select
5 Press DOWN arrow button to highlight Auto Program. Press [+]to search for channels
6 After Auto Program finishes, press MENU button to exit.
OK



Dec 18, 2010 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

We can't get any of the channels don't know where to start from menu area


Hello

You just do autotune to receive all channels. In this mode TV will tune through the entire channel band automatically, and finally will stop tuneing, and will show the first channel receved. You must be patient for these time. about two or three minutes, without disturbing is process. The tuning process follows.

Auto Tuner Setup

In Auto Tuner Setup, the TV automatically scans

t h rough all available channels, memorizing the active

ones and skipping over blank ones or channels with

weak signals. This means when you scan (using the

CH A N N E L +/- b u t t o n s ) you will receive only clear,
active channels
P ress the ME N U b u t t o n
Press UP or DOWN buttonTo AUTO TUNER SETUP
Press Right or Left button to operate
Press Vol+ or Vol (--) to choose CABLE or AIR
Press UP or DOWN button to move to START
Press Right or Left Button to start Auto Tuner Setup

Tv will show "NOW PROGAMMING" display.
Programming will take approximately 1 to 2 minutes.
After all it will show
PROGRAMMING OVER

Some cable systems experience interference from radio frequencies on cable Channel 95. You may delete this channel from
your scan by removing the "X" next to it on the Channel Summary screen.

Nov 29, 2010 | JVC AV-27120 27" TV

1 Answer

Can't figure out how to turn on cable on Sony Trinitron TV


Setting Up the TV
After you have finished connecting your TV, you can use Auto Program to set up your
channels. During Auto Program, the TV will automatically search for available channels and
program receivable channels.
(Make sure CABLE is connected on coaxial and you are not using any other connections such as cable box, hdtv or satellite antenna)

1 Press to turn on the TV. The Initial Setup screen appears.
2 Press on the remote control or on the TV front panel to start Auto Program, or press
to exit.
To perform Auto Program again
1
Press .
2 Press g to highlight Channel Menu.
3 Press f to highlight Cable. Press to select.
4 Press F or f to highlight On or Off according to how you connected your TV. Press to
select.
5 Press f to highlight Auto Program. Press to search for channels.
6 After Auto Program finishes, press to exit.
To reset the TV to factory settings
1
Turn the TV on.
2 Hold down on the remote control.
3 Press and release the POWER button on the TV front panel. The TV will turn itself off,
then back on.
4 Release .
✍ When you start Auto Program wait until it is finished; otherwise it will skip over channels that are
available. Perform Auto Program again to program receivable channels.
✍ The Initial Setup screen appears each time you turn on the TV until you perform Auto Program.
Initial Setup
Auto Program [CH+]
[CH–]
First please connect
cable/antenna
Exit

Jan 17, 2009 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

#4 & #5 buttons do not work on my remote. Channel 55 wont come in either on my tv


I had that problem 2 my channels disapeared one by one and some will skip yes...

I always use on my remote controll :

1 menu
2 Ch tuning
3 auto

and then wait untill it has found all the channels

Oct 02, 2008 | Orion1934 19" TV

1 Answer

Program channels


TV SETTING
1. Press the MENU button.
2. Use or button to select the TV setting menu, then press or button.
3. Use or button to select the Channel no. setting and use the or button
to change from AIR (over-the-air broadcasts) to CABLE (cable/satellite broadcasts).
4. Use or button to select the Tuning mode and use the or button.
5. Use or button to select the Auto tune and press or button to
confirm the selection. The unit will immediately search through all possible TV
channels and store those channels with signals in memory. After this is complete,
the unit will switch to the first channel found.
6. To exit the MAIN MENU and return to the normal screen, press the EXIT button.
Note : In DVD mode, this option is not available.
Remarks:
1. Channel no. : 2-69 channel for Air mode, 1-125 channel for Cable mode.
2. Tuning mode : Air or Cable mode are available.
3. Auto tune : Searches for usable stations and stores them in memory.
4. Skip : ON - Skip weak channels. OFF - No channel skip.
5. Fine tune : The frequency changes to allow fine tuning.
6. AFC : Auto frequency control.
7. MTS : Select the Mono sound/Stereo sound/Secondary Audio Program (SAP).
21
TV SETUP
MTS (Multi-channel Television Sound) SETTING
This feature allows reception of sound other than the main audio for the program.
1. Press the MENU button.
2. Use or button to select the TV setting menu, then press or button.
3. Use or button to select MTS menu, and press or button to select the
options (Mono, Stereo, SAP)
4. To exit the MAIN MENU and return to the normal screen, press the EXIT button
on remote control.
Note:
• MTS only operates while in TV mode.
• The SAP (Secondary Audio Programs) feature allows a TV station to broadcast
other information, which could be audio in another language.
RESTORE SETTING
If you reset the TV to the factory settings, all your present settings on picture &
sound will be erased and replaced by the factory’s default settings. However, picture
setting in PC mode and parental setting will not be erased.

Jul 15, 2008 | TruTech PLV1615T 15 in. LCD Television

Not finding what you are looking for?
LG 32LD350 32 in. LCD TV Logo

1,060 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

73665 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...