Question about Epson Office Equipment & Supplies

1 Answer

Was printing labels and the feeder pulled the page through crooked so it jammed. I pulled the paper out, it ripped, I opened the printer and got the remaining peices out and shut off the printer. When I turned it back on, the screen read ;A printer error has occurred. Turn off the printer, ten press On button to turn on. See your documentation." and the buttons flash. I did as advised with the same screen when it came back on. I also shut it off, and the ,no avail. It still shows the same error message. Please help!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 182 Answers

ALthough you didnt give the model of the printer this has helped reset it on other epson printers.
unplug the printer from both USB and Power.
Hold down power button and then plug in the printer while the power is held down.
if this doesn't do it try holding down the paper button and the power, while plugging in. since this can be tricky, plug it into a power strip so you can power off and on easily. This is a help at the bottom for a R220 that mentions somthing similar.
http://files.support.epson.com/htmldocs/pho22_/pho22_rf/parts_1.htm

Posted on Mar 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I align the HP Laserjet 1020 to print straight? Its printing crooked every time. No two sheets are in the same position


Most likely to be a page feed problem, look online to clean page feeder rubber rollers.
Try here for the pdf manual which covers problem with jams and skewing
http://www.hp.com/ctg/Manual/c00264334.pdf

Mar 05, 2015 | HP LaserJet 1020 Printer

1 Answer

I am trying to print a label through the document feeder and keep receiving error messages on my Brother MFC9320CW AllInOne Printer .."Open the Top cover and pull out all 4 drum units completely and...


Try putting more than one sheet of labels in the paper tray. Even if you're printing one label, it helps the printer grab the paper without that error somehow. If you're already using more than one sheet, I don't know. Good luck either way!!! :)

Jan 18, 2011 | Office Equipment & Supplies

2 Answers

I am printing several pages and there is a jam. I


It will re-print it after you clear the jam. Just pull it out pulling slowly and evenly and it will come out.Also you can see directions on HP.com. Steven 818-888-0006

Mar 06, 2010 | HP LaserJet 3055 All-In-One Printer

1 Answer

Hp deskjet 5550 is grabing the paper but paper prints crooked


You may have a paper jam (small paper cut) in the feeder ytry to check it and see if you can clean it...or you may bent the feeder...open it and let me know

Sep 13, 2009 | Office Equipment & Supplies

1 Answer

HP laserjet 4L paper jam after printing one page.


You need the pick up rollers replaced. Call your service centre to replace pick rollers as these are feeding the pages crocked

Aug 31, 2009 | HP LaserJet 4L Printer

1 Answer

Pixma MP780 paper jam


Sandra, on the feed swich which way is the arrow pointing to the front feeder? or to the back feeder? Get a bright flashlight and inspect the back very carefuly. I had the same problem and found a label off of a shirt inside, don't ask me how it got there I havent a clue. But it did fix the problem. You can also try turning it on and off a few times.

If the arrow is pointing to the front paper feeder then the jam is in the front, if it is pointing to the rear that is where there is a problem. Hope this will help. Leo

Mar 15, 2009 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

I865 flashing 3 times


That's a "paper jam" error that can be fixed by removing all paper and pressing the resume/cancel button. Then replace the paper in the feed chute.
The printer can straighten out a crooked feed to a very limited degree. The photo feeder attachment can interfere with a really full 8x11 feed. The i860 is very susceptible to overfilling the 8 1/2 x11 feeder without notice until you try to print. I usually remove the photo feeder until I need to print photos, and keep the regular paper feeder no more than 3/4 full. I pull out the regular paper when printing photos.

Feb 24, 2009 | Canon i860 InkJet Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...