Question about Kenmore HE2 Plus Front Load Washer

2 Answers

Shows 5d - Kenmore HE2 Plus Front Load Washer

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

The following link explains the error in more detail and how to correct the suds error which you are facing

http://www.fixya.com/support/r3608687-sud_error

COURTESY:jsrock - A senior expert of fixya..

Posted on Mar 11, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 8,220 Answers

5d= Suds warning. Motor overamping tips off the control that their is trouble. Overworked motor ain't good. Items between tubs clogged pumps and overuse of detergent is the top 3 reasons for a suds error. For that puppy to be declaring an error means it has tried 3 times to add water and flush the soap.Too much detergent can trigger this error,also junk in the pump filter cleanout. Interesting video:

Service manual and more here

Shows 5d - themobilian_1829.jpg

Posted on Mar 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the code 5d mean on my washing machin???


5d is actually SD
it means SUDS
you have suds detected in the pump
Your using too much soap and the machine cannot rinse it
try one load with out any soap
from that load on you should not be using any more that a table spoon per load

Oct 20, 2009 | Washing Machines

1 Answer

F21 and 5d code


that is because there is a problem with your pump. you need to take the bottom panel off and untwist the pump filter if it has gone further you need to take the 3 screws out of the pump and clean the impeller. try cleaning the pump filter first though and let me know how it goes

Jun 24, 2009 | Kenmore Washing Machines

1 Answer

Canon 5d cannot format cf care


Hi there, did you check the card itself? SD cards have a locking switch on the side. Move the switch from locked to unlocked. Put it back in the camera and see if that helps.

Rob

Mar 02, 2009 | Canon EOS-5D Digital Camera

1 Answer

Under exposed pictures when using studio lighting with 5D


A black shadow at the bottom of the image is usually the result of using a shutter speed that is beyond the max flash sync speed of your camera. The max sync speed of the 5D and 20D is 1/200th. In a studio setting with wireless triggers there can be additional latency. Try using a shutter speed of 1/125th and see if that clears it up. You may be able to push it a little higher as pocket wizards are very good wireless triggers but don't use a shutter speed above 1/200th.

Jan 27, 2009 | Canon EOS-5D Digital Camera

2 Answers

Have a Abit A17 mother board that posting a 25 or 5D error code


I picked this up from an abit forum, It appears that it is quite common, look here, http://forums.hexus.net/abit-care-hexus/104674-abit-ab9-pro-code-25-error.html

Dec 21, 2008 | Abit A17 Guru Motherboard

1 Answer

My Monolta Dynax 5D judders on startup, then the shake reduction display flashes then it wont take pictures or turn off. It just shows br1 in viewfinder display


It would appear from other sites and users that the anti-shake mech has failed and the cost to repair outweighs the value so I will stick with my SonyA700, sell the lenses and filters I dont need and scrap the body. Thanks for the reply.

Aug 07, 2008 | Konica Minolta Dynax 5D / Maxxum 5D...

1 Answer

Out of funcion


This is a known issue with a fault with the charged couple device CCD.  If you contact Konica Minolta / Sony in your city they should replace it as a recall.

Jun 02, 2008 | Konica Minolta Dynax 5D / Maxxum 5D Body...

1 Answer

Mp3 player


I did a google search and here's what I hit.

Maybe a good place to start

http://www.consumer.philips.com/consumer/en/us/consumer/ce/_categoryid_MP3_AND_PORTABLE_PLAYERS_CA_US_CONSUMER#;filterStates=%5BFK_MP3_PLAYERS_SUBCAT%3Btrue%5D%5BFK_AUDIOVIDEO_PLAYER%3Bfalse%5D%5BFK_CD_MP3_PLAYER%3Bfalse%5D%5BFK_DVD_PLAYER%3Bfalse%5D%5BFK_AUDIO_DRM_PORTABLE_AUDIO%3Bfalse%5D%5BFK_AUDIO_AND_VIDEO_DRM%3Bfalse%5D%5BFK_PHOTOVIEWING_PORTABLE%3Bfalse%5D%5BFK_TWIN_SCREEN_PORTABLE%3Bfalse%5D%5BFK_USB_SLOT_PORTABLE_AUDIO%3Bfalse%5D%5BFK_SD_MMC_CARD_SLOT%3Bfalse%5D%5Bcompare%3Bfalse%5D

Dec 29, 2007 | Audio Players & Recorders

Not finding what you are looking for?
Kenmore HE2 Plus Front Load Washer Logo

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2290 Answers

fordexpert

Level 3 Expert

5537 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...