Logitech web cam

Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to run the support software - Microsoft DirectX . This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11
To start the DirectX Diagnostic Tool, click Start, click Run, type dxdiag in the Open box, and then click OK.

Procedure to re-install Logitech software
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Logitech
Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.
Connect your webcam when prompted.

1st You download Webcam Driver.
software or drivers
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Hello, can you tell me your exact model of your cam? and I gonna get your driver for you

You can download the software from the below link..
http://www.logitech.com/index.cfm/support_downloads/downloads/&cl=gb,en

select the appropriate product and download the drivers.
Thank you.

need to download drivers for Logitech quickcam for notebooks 4.9mm can you help me pleasse

you can find it on the web:

http://www.logitech.com/index.cfm/435/243&cl=us,en

you can find drivers and software for other logitech items at there website:

http://www.logitech.com/index.cfm/support_downloads/downloads/&cl=us,en

Hi,

You can download here from Logitech. Just pick your operating system.

HI YOU CAN DOWNLOAD THE SOFTWRE FOR LOGITECH WEBCAM FROM THIS LINK http://www.logitech.com/index.cfm/support_downloads/downloads/&cl=gb,en

bye,
take care& have a nice day

lost software for cam

when you were installing the software did a taskbar pop up appear and tell you that hardware was found, and then proceeded to install the cam and inform you that the Logitech STX is now installed and ready for use? If not then the cam may need to be tried in another usb port as of yet it has not been recognised by windows. Also if this is being used on a laptop, sometimes there is not enough power amps being sent be the usb port to recognise, again trying a different port may solve that. If all else fails re install the software again, but make sure windows is allowing the cam to work, as sometimes there is an updater programme that works in conjunction with the cam to update drivers etc, this will probably be being dissalowed by either windows or your internet security programme and any part of the software that is being blocked may be stopping your cam also.