Question about Baby Lock Esante
The Touch Screen on my Ese2 is messed up. I had it professionally recalibrated once and just did it again myself. The symbols beyond the 3rd one are off one choice. There is a horizontal line across the screen. Two repair men have told me that the Touch Screen needs to be replaced at a cost of $500.00 +. I am retired on a fixed income and cannot afford this. Can you help me? Please. I love to sew.
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you need software to trace/convert the image to vector and then to .pes and then you will need a blank (compatible brother/babylock) card and card reader box to transfer the file to and insert the card into the machine to emborider it.
If yo need images converted email me the image and i can convert it to an embrodery file for small fee.
hope this helps.
Posted on Jan 28, 2009
SOURCE: Thread is gettting caught in
It could be that your bobbin case popped out of position. Try removing and resetting it.
It could be that you have no upper tension, either lint in the tension discs or upper thread is mis-threaded and did not get down into the tension discs (make sure lifter lever is up when threading so the discs are open).
Posted on Jan 31, 2009
Many things can inter fear with the thread and cause it to break. A common problem is the thread getting wrapped around the top tension rollers on that machine. You can take off the "face cover" (side cover on the left) and look from the side and see if the 2 little rollers have thread wrapped around or underneath them. Start there.
Posted on Jul 25, 2009
Tips for a great answer:
Aug 03, 2017 | Sewing Machines
1. Turn the power on while holding down the [Start/Stop], [Reverse stitch], and [Needle position] buttons.
2. Touch the positions marked with crosses (+) on the touch panel in order from 1 to 5.
• Setting is successful if a single beep sounds when "5" is pressed.
• An error has occurred if two beeps sound when "5" is pressed. Repeat from position 1 again.
3. Turn the power off and then on again. Check that the screen display matches the positions on the touch panel
May 17, 2015 | Baby Lock Esante
Sep 12, 2014 | Sewing Machines
Mar 18, 2014 | Baby Lock Esante
Nov 19, 2013 | Sewing Machines
Sep 06, 2013 | Baby Lock Esante
Apr 25, 2010 | Baby Lock Esante
Nov 16, 2009 | Baby Lock Esante
Dec 25, 2008 | Baby Lock Esante
64 people viewed this question
Usually answered in minutes!