Question about TalkSwitch CT.TS001.124001.US Full-Featured PBX Telephone System

1 Answer

Unparking calls feature does not work

I don't have a flash key on my phone. What do I use.?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Press the hook-switch and release it immediately; this is what the 'flash' button simulates doing. In other words hang your phone up for half a second or less and you have sent a 'flash' signal. This will work with any analog phone. If you have ever used traditional call waiting from your home telephone it is exactly the same.

Posted on Feb 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the feature key to stop blinking?


These phones work on about 8 NEC phone systems, but most are just newer versions of the same system. So, most likely the callback feature has been activated. Someone internally calls you, you don't answer, they dial # to activate callback. You come back to your phone, see feature key flashing, lift handset, dial #, call goes to whoever set callback, then feature key stops blinking.

Jul 07, 2014 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

How can I make conference call or joint call fron vtech cordless phone


Hi,
To make two-party call on your Panasonic phone and ask the person on the other line to wait for a moment.
  • Check to see if your Panasonic phone has a flash key feature. If it does, press the flash key down and wait until you hear the confirmation tone. If the Panasonic phone you're using does not have a flash key, hold down the the hook switch for half a second, then release. Dial the number of the third person in your conference call. If you're inviting someone in-house to be a part of your conference call, dial their extension number instead. If you're dialing an outside line you may need to dial 9 before dialing the number.

  • Wait for the new addition to the conference call to answer and then press the Flash key again. Wait an additional two or three seconds before pressing the number three on your telephone keypad. Start your conference call. Once you've pressed the flash key followed by the number 3, as in Step 4, your conference call is established. If you wish to add additional participants simply repeat Steps 3 and 4.

    Regards


  • Jun 30, 2011 | Vtech Cordless 6041 Phone

    5 Answers

    My first line will not work anymore, it just dials and then the person dialing it gets a dial tone. So, I had to forward it to one of my other lines. How do I fix this?


    What do you want to change? What feature is programmed on the button?

    "EACH OF THESE CODES ARE PRECEEDED WITH THE ""FEATURE" " KEY"

    **CONFIG NORSTAR CONFIGURATION PROGRAMMING (INSTALLER)
    **SCPLUS NORSTAR SYSTEM COORDINATOR PLUS PROGRAMMING
    (CICS AND ICS 2.0+)
    **ADMIN NORSTAR ADMINISTRATIVE PROGRAMMING (SYS Coordinator)
    **BASIC NORSTAR BASIC PROGRAMMING (CICS & ICS S.0+)
    **SET NORSTAR SET PROFILE
    **LINE NORSTAR LINE PROFILE
    **USER NORSTAR USER PREFERENCES (CICS & ISC 2.0+)
    **TIME NORSTAR TIME AND DATE (CICS & ICS 2.0+)
    *0 BUTTON INQUIRY
    *1 FEATURE KEY EXTERNAL AUTODIAL
    *2 FEATURE KEY INTERNAL AUTODIAL
    *3 FEATURE KEY PROGRAMMING
    *4 PERSONNEL SPEED DIAL
    *501 SELECT ENGLISH
    *502 SELECT FRENCH
    *503 SELECT SPANISH
    *6 RING TYPE
    *7 DISPLAY CONTRAST ADJUST
    *80 RING VOLUME ADJUST
    *81 MOVE LINE KEYS
    *82 DIAL MODES
    *831 AA ON/OFF (CICS)
    *832 CCR ON/OFF (CICS)
    *833 AA/CCR RECORDING MAINTENANCE (CICS)
    *84 AUTO LOG OPTIONS
    *85 CALL LOG PASSWORD
    *89 PROGRAMMED RELEASE
    *9 RUN/STOP
    0 SYSTEM SPEED DIAL
    1 SEND MESSAGE
    #1 SEND MESSAGE CANCEL
    2 RING AGAIN
    #2 RING AGAIN CANCEL
    3 CONFERENCE / TRANSFER
    #3 CONFERENCE SPLIT
    4 CALL FORWARD
    #4 CALL FORWARD CANCEL
    5 LAST NUMBER REDIAL
    60 PAGE GENERAL
    61X PAGE INTERNAL ZONE (1-6)
    62 PAGE EXTERNAL
    63X PAGE INTERNAL ZONE (1-6) PLUS EXTERNAL
    64 LINE POOLS
    65 MESSAGE REPLY
    #65 MESSAGE REPLY CANCEL
    66 VOICE CALL
    67 SAVED NUMBER
    68 RESTRICTION /COS OVERRIDE
    69 PRIORITY CALL
    70 CALL TRANSFER (BLIND)
    71 LINK (HOOK FLASH)
    72 TIMED RELEASE
    74 CALL PARK
    75 GROUP CALL PICKUP
    76 DIRECTED CALL PICKUP
    77 CALL DURATION TIMER
    78 PAUSE
    79 EXCLUSIVE HOLD
    800 TRUNK ANSWER
    801 CALL QUEUING
    802 GROUP LISTENING
    803 SHOW TIME
    804 WAIT FOR DIAL TONE
    805 TEST SETS (2.0)
    806 HIDE DISPLAY
    808 LONG TONES
    810 MAKE BUSY
    811 CALL INFORMATION
    812 ENTER CALL LOG
    813 LOG IT
    815 AUTO BUMPING
    817 IRAD TRANSFER (CICS ONLY)
    819 OUTGOING NAME AND NUMBER BLOCKING (4.1)
    #819 CANCEL OUTGOING NAME AND NUMBER BLOCKING
    82 CAMP ON
    83 PRIVACY CONTROL
    84 LINE REDIRECTON
    #84 CANCEL LINE REDIRECTION
    85 DO NOT DISTURB
    #85 CANCEL DO NOT DISTURB
    86 BACK GROUND MUSIC
    #86 CANCEL BACKGROUND MUSIC
    87 "SERVICE MODES (DR-3,4,5)"
    #87 CANCEL SERVICE MODES
    870 SHOW SERVICE MODES (CICS)
    871 EXTENDED RINGING (ICS)
    #871 CANCEL EXTENDED RINGING
    872 ALTERNATIVE RESTRICTIONS
    #872 CANCEL ALTERNATIVE RESTRICTIONS
    873 ALTERNATIVE ROUTING
    #873 CANCEL ALTERNATIVE ROUTING
    88 VOICE CALL DENY
    #88 CANCEL VOICE CALL DENY

    FEATURE 900 CODES ARE USED FOR OPTIONAL EQUIPMENT SUCH AS:
    "VOICE MAIL, ACD, DIAL BY NAME, DOOR PHONE, ETC."
    THE FOLLOWING ARE SOME COMMON USAGES:
    9** "RAD PROGRAMMING (RAD 2, FASTRAD)"
    9*0 RAD TRANSFER (ALL BUT CICS IRAD'S)
    9*1 CHECK FEATURE CODES FOR VOICE MAIL
    9*2 SMDR Admin
    9*3 LOGGER TIME STAMP
    9*3 VMI Codes(this was on an 8x24, came up on this code rather than F9*9)
    9*4 NORSTAR DOOR PHONE PROGRAMMING
    9*5 FLASH LOW RANGE CHECK FEATURE CODES
    9*7 ACD ADMIN MAINTENANCE SESSION
    9*9 VOICE MAIL INTERFACE (VMI) CODES
    900 SMDR,enter an account number to be logged with the call
    901 ACD LOGIN
    901 VMI Admin
    902 ACD UNAVAILABLE
    903 VOICE MAIL HIGH/LOW RANGE SELECTION (DISABLED AFTER USE)
    903 ACD CANCEL WRAP
    904 ACD HELP
    904 FLASH ACD LOW RANGE LOGIN/OUT
    905 ACD CATEGORIZE
    905 FLASH LOW RANGE DN IDENTIFIER
    906 ACD RECORD CALL
    906 FLASH LOW RANGE VM TRANSFER
    907 FLASH LOW RANGE VM INTERRUPT
    908 STAR TEXT (OBSOLETE)
    908 FLASH ACD LOW RANGE BUSY MODE
    909 ACD ANN. MAINTENANCE
    909 FLASH ACD LOW RANGE QUEUE STATUS
    910 FLASH LOW RANGE LEAVE MESSAGE
    911 FLASH LOW RANGE OPEN MAILBOX
    912 FLASH LOW RANGE OPERATOR CONTROL
    913 ACD CALLS QUEUED
    913 FLASH LOW RANGE SYSTEM ADMIN LOGIN
    915 NORSTAR VOICE MAIL 2ND LEVEL ACCESS (PSWD=ACCESS2)
    920 ACD ADMIN SESSION
    921 ACD ROUTING SESSION DAY/NIGHT
    922 ACD ADMIN STATISTICS SESSION
    923 ACD GROUP STATISTICS SESSION
    960 DIAL BY NAME (CINTECH NSVM OPTION)
    961 DIAL BY NAME ADMIN (PSWD=1234)
    980 VM SEND MSG TO ANOTHER MAILBOX
    981 VM LOG INT MAILBOX
    982 VM OPERATOR STATUS(PSWD=OPERATOR(67372867))
    983 VM ADMIN PROGRAMMING (PSWD=1020000)
    983 VM SOFTWARE LEVEL(LOGIN THEN OPTION 9)
    984 VM TIME AND DATE(STARTALK Pswd=1020000)
    984 AUTO FOREWARD TO VMAIL(NSVM4.0)
    984 FLASH ACD LOGIN/OUT
    985 "VOICE MAIL DN INQUIRY(RESET VM ADMIN PSWD 9,73738767793)"
    986 VOICE MAIL TRANSFER
    987 VOICE MAIL INTERRUPT
    988 VOICE ACTIVATED NAME DIALING (NSVM 4.0)
    988 FLASH ACD BUSY MODE
    989 RECORD CALL (NSVM 4.0)
    989 FLASH ACD QUEUE STATUS

    Jun 23, 2011 | NorStar M7310 Corded Phone

    1 Answer

    Hola tengo una centralita Partner acs y no me funciona la tecla de flash de los telefonos sencillos (no son avaya) que necesito programar?. I have a pbx Partener ACS, the key of flash does not work in the...


    To program a flash key press feature 00. then press the key you want to be a flash button, then press feature 03. Press feature 00 again to exit programming.

    Apr 27, 2010 | Avaya Corded Phone avaparp18d

    2 Answers

    Message Indicator Light Continues to Flash


    Don't know about other models, but I just called RCA small business phone support (800-511-3180) to find out how to clear the message light indicator on my 25210 2-line cordless phone when it continues to blink but there is no message.

    All you have to do is hold down the delete button for a few seconds and it will clear. Hope this helps someone else from going batty!

    Feb 12, 2009 | RCA 25414RE3 Corded Phone

    1 Answer

    Where can i find instructions for using features Norstar M7031


    The feature codes will not help you troubleshoot the system at all. But here you go:


    "EACH OF THESE CODES ARE PRECEEDED WITH THE ""FEATURE" " KEY"

    **CONFIG NORSTAR CONFIGURATION PROGRAMMING (INSTALLER)
    **SCPLUS NORSTAR SYSTEM COORDINATOR PLUS PROGRAMMING
    (CICS AND ICS 2.0+)
    **ADMIN NORSTAR ADMINISTRATIVE PROGRAMMING (SYS Coordinator)
    **BASIC NORSTAR BASIC PROGRAMMING (CICS & ICS S.0+)
    **SET NORSTAR SET PROFILE
    **LINE NORSTAR LINE PROFILE
    **USER NORSTAR USER PREFERENCES (CICS & ISC 2.0+)
    **TIME NORSTAR TIME AND DATE (CICS & ICS 2.0+)
    *0 BUTTON INQUIRY
    *1 FEATURE KEY EXTERNAL AUTODIAL
    *2 FEATURE KEY INTERNAL AUTODIAL
    *3 FEATURE KEY PROGRAMMING
    *4 PERSONNEL SPEED DIAL
    *501 SELECT ENGLISH
    *502 SELECT FRENCH
    *503 SELECT SPANISH
    *6 RING TYPE
    *7 DISPLAY CONTRAST ADJUST
    *80 RING VOLUME ADJUST
    *81 MOVE LINE KEYS
    *82 DIAL MODES
    *831 AA ON/OFF (CICS)
    *832 CCR ON/OFF (CICS)
    *833 AA/CCR RECORDING MAINTENANCE (CICS)
    *84 AUTO LOG OPTIONS
    *85 CALL LOG PASSWORD
    *89 PROGRAMMED RELEASE
    *9 RUN/STOP
    0 SYSTEM SPEED DIAL
    1 SEND MESSAGE
    #1 SEND MESSAGE CANCEL
    2 RING AGAIN
    #2 RING AGAIN CANCEL
    3 CONFERENCE / TRANSFER
    #3 CONFERENCE SPLIT
    4 CALL FORWARD
    #4 CALL FORWARD CANCEL
    5 LAST NUMBER REDIAL
    60 PAGE GENERAL
    61X PAGE INTERNAL ZONE (1-6)
    62 PAGE EXTERNAL
    63X PAGE INTERNAL ZONE (1-6) PLUS EXTERNAL
    64 LINE POOLS
    65 MESSAGE REPLY
    #65 MESSAGE REPLY CANCEL
    66 VOICE CALL
    67 SAVED NUMBER
    68 RESTRICTION /COS OVERRIDE
    69 PRIORITY CALL
    70 CALL TRANSFER (BLIND)
    71 LINK (HOOK FLASH)
    72 TIMED RELEASE
    74 CALL PARK
    75 GROUP CALL PICKUP
    76 DIRECTED CALL PICKUP
    77 CALL DURATION TIMER
    78 PAUSE
    79 EXCLUSIVE HOLD
    800 TRUNK ANSWER
    801 CALL QUEUING
    802 GROUP LISTENING
    803 SHOW TIME
    804 WAIT FOR DIAL TONE
    805 TEST SETS (2.0)
    806 HIDE DISPLAY
    808 LONG TONES
    810 MAKE BUSY
    811 CALL INFORMATION
    812 ENTER CALL LOG
    813 LOG IT
    815 AUTO BUMPING
    817 IRAD TRANSFER (CICS ONLY)
    819 OUTGOING NAME AND NUMBER BLOCKING (4.1)
    #819 CANCEL OUTGOING NAME AND NUMBER BLOCKING
    82 CAMP ON
    83 PRIVACY CONTROL
    84 LINE REDIRECTON
    #84 CANCEL LINE REDIRECTION
    85 DO NOT DISTURB
    #85 CANCEL DO NOT DISTURB
    86 BACK GROUND MUSIC
    #86 CANCEL BACKGROUND MUSIC
    87 "SERVICE MODES (DR-3,4,5)"
    #87 CANCEL SERVICE MODES
    870 SHOW SERVICE MODES (CICS)
    871 EXTENDED RINGING (ICS)
    #871 CANCEL EXTENDED RINGING
    872 ALTERNATIVE RESTRICTIONS
    #872 CANCEL ALTERNATIVE RESTRICTIONS
    873 ALTERNATIVE ROUTING
    #873 CANCEL ALTERNATIVE ROUTING
    88 VOICE CALL DENY
    #88 CANCEL VOICE CALL DENY

    FEATURE 900 CODES ARE USED FOR OPTIONAL EQUIPMENT SUCH AS:
    "VOICE MAIL, ACD, DIAL BY NAME, DOOR PHONE, ETC."
    THE FOLLOWING ARE SOME COMMON USAGES:
    9** "RAD PROGRAMMING (RAD 2, FASTRAD)"
    9*0 RAD TRANSFER (ALL BUT CICS IRAD'S)
    9*1 CHECK FEATURE CODES FOR VOICE MAIL
    9*2 SMDR Admin
    9*3 LOGGER TIME STAMP
    9*3 VMI Codes(this was on an 8x24, came up on this code rather than F9*9)
    9*4 NORSTAR DOOR PHONE PROGRAMMING
    9*5 FLASH LOW RANGE CHECK FEATURE CODES
    9*7 ACD ADMIN MAINTENANCE SESSION
    9*9 VOICE MAIL INTERFACE (VMI) CODES
    900 SMDR,enter an account number to be logged with the call
    901 ACD LOGIN
    901 VMI Admin
    902 ACD UNAVAILABLE
    903 VOICE MAIL HIGH/LOW RANGE SELECTION (DISABLED AFTER USE)
    903 ACD CANCEL WRAP
    904 ACD HELP
    904 FLASH ACD LOW RANGE LOGIN/OUT
    905 ACD CATEGORIZE
    905 FLASH LOW RANGE DN IDENTIFIER
    906 ACD RECORD CALL
    906 FLASH LOW RANGE VM TRANSFER
    907 FLASH LOW RANGE VM INTERRUPT
    908 STAR TEXT (OBSOLETE)
    908 FLASH ACD LOW RANGE BUSY MODE
    909 ACD ANN. MAINTENANCE
    909 FLASH ACD LOW RANGE QUEUE STATUS
    910 FLASH LOW RANGE LEAVE MESSAGE
    911 FLASH LOW RANGE OPEN MAILBOX
    912 FLASH LOW RANGE OPERATOR CONTROL
    913 ACD CALLS QUEUED
    913 FLASH LOW RANGE SYSTEM ADMIN LOGIN
    915 NORSTAR VOICE MAIL 2ND LEVEL ACCESS (PSWD=ACCESS2)
    920 ACD ADMIN SESSION
    921 ACD ROUTING SESSION DAY/NIGHT
    922 ACD ADMIN STATISTICS SESSION
    923 ACD GROUP STATISTICS SESSION
    960 DIAL BY NAME (CINTECH NSVM OPTION)
    961 DIAL BY NAME ADMIN (PSWD=1234)
    980 VM SEND MSG TO ANOTHER MAILBOX
    981 VM LOG INT MAILBOX
    982 VM OPERATOR STATUS(PSWD=OPERATOR(67372867))
    983 VM ADMIN PROGRAMMING (PSWD=1020000)
    983 VM SOFTWARE LEVEL(LOGIN THEN OPTION 9)
    984 VM TIME AND DATE(STARTALK Pswd=1020000)
    984 AUTO FOREWARD TO VMAIL(NSVM4.0)
    984 FLASH ACD LOGIN/OUT
    985 "VOICE MAIL DN INQUIRY(RESET VM ADMIN PSWD 9,73738767793)"
    986 VOICE MAIL TRANSFER
    987 VOICE MAIL INTERRUPT
    988 VOICE ACTIVATED NAME DIALING (NSVM 4.0)
    988 FLASH ACD BUSY MODE
    989 RECORD CALL (NSVM 4.0)
    989 FLASH ACD QUEUE STATUS

    Dec 08, 2008 | NorStar M7310 Corded Phone

    1 Answer

    Problems with norstar m7310 corded phone do not disturb feature


    What do you want to change? What feature is programmed on the button?

    "EACH OF THESE CODES ARE PRECEEDED WITH THE ""FEATURE" " KEY"

    **CONFIG NORSTAR CONFIGURATION PROGRAMMING (INSTALLER)
    **SCPLUS NORSTAR SYSTEM COORDINATOR PLUS PROGRAMMING
    (CICS AND ICS 2.0+)
    **ADMIN NORSTAR ADMINISTRATIVE PROGRAMMING (SYS Coordinator)
    **BASIC NORSTAR BASIC PROGRAMMING (CICS & ICS S.0+)
    **SET NORSTAR SET PROFILE
    **LINE NORSTAR LINE PROFILE
    **USER NORSTAR USER PREFERENCES (CICS & ISC 2.0+)
    **TIME NORSTAR TIME AND DATE (CICS & ICS 2.0+)
    *0 BUTTON INQUIRY
    *1 FEATURE KEY EXTERNAL AUTODIAL
    *2 FEATURE KEY INTERNAL AUTODIAL
    *3 FEATURE KEY PROGRAMMING
    *4 PERSONNEL SPEED DIAL
    *501 SELECT ENGLISH
    *502 SELECT FRENCH
    *503 SELECT SPANISH
    *6 RING TYPE
    *7 DISPLAY CONTRAST ADJUST
    *80 RING VOLUME ADJUST
    *81 MOVE LINE KEYS
    *82 DIAL MODES
    *831 AA ON/OFF (CICS)
    *832 CCR ON/OFF (CICS)
    *833 AA/CCR RECORDING MAINTENANCE (CICS)
    *84 AUTO LOG OPTIONS
    *85 CALL LOG PASSWORD
    *89 PROGRAMMED RELEASE
    *9 RUN/STOP
    0 SYSTEM SPEED DIAL
    1 SEND MESSAGE
    #1 SEND MESSAGE CANCEL
    2 RING AGAIN
    #2 RING AGAIN CANCEL
    3 CONFERENCE / TRANSFER
    #3 CONFERENCE SPLIT
    4 CALL FORWARD
    #4 CALL FORWARD CANCEL
    5 LAST NUMBER REDIAL
    60 PAGE GENERAL
    61X PAGE INTERNAL ZONE (1-6)
    62 PAGE EXTERNAL
    63X PAGE INTERNAL ZONE (1-6) PLUS EXTERNAL
    64 LINE POOLS
    65 MESSAGE REPLY
    #65 MESSAGE REPLY CANCEL
    66 VOICE CALL
    67 SAVED NUMBER
    68 RESTRICTION /COS OVERRIDE
    69 PRIORITY CALL
    70 CALL TRANSFER (BLIND)
    71 LINK (HOOK FLASH)
    72 TIMED RELEASE
    74 CALL PARK
    75 GROUP CALL PICKUP
    76 DIRECTED CALL PICKUP
    77 CALL DURATION TIMER
    78 PAUSE
    79 EXCLUSIVE HOLD
    800 TRUNK ANSWER
    801 CALL QUEUING
    802 GROUP LISTENING
    803 SHOW TIME
    804 WAIT FOR DIAL TONE
    805 TEST SETS (2.0)
    806 HIDE DISPLAY
    808 LONG TONES
    810 MAKE BUSY
    811 CALL INFORMATION
    812 ENTER CALL LOG
    813 LOG IT
    815 AUTO BUMPING
    817 IRAD TRANSFER (CICS ONLY)
    819 OUTGOING NAME AND NUMBER BLOCKING (4.1)
    #819 CANCEL OUTGOING NAME AND NUMBER BLOCKING
    82 CAMP ON
    83 PRIVACY CONTROL
    84 LINE REDIRECTON
    #84 CANCEL LINE REDIRECTION
    85 DO NOT DISTURB
    #85 CANCEL DO NOT DISTURB
    86 BACK GROUND MUSIC
    #86 CANCEL BACKGROUND MUSIC
    87 "SERVICE MODES (DR-3,4,5)"
    #87 CANCEL SERVICE MODES
    870 SHOW SERVICE MODES (CICS)
    871 EXTENDED RINGING (ICS)
    #871 CANCEL EXTENDED RINGING
    872 ALTERNATIVE RESTRICTIONS
    #872 CANCEL ALTERNATIVE RESTRICTIONS
    873 ALTERNATIVE ROUTING
    #873 CANCEL ALTERNATIVE ROUTING
    88 VOICE CALL DENY
    #88 CANCEL VOICE CALL DENY

    FEATURE 900 CODES ARE USED FOR OPTIONAL EQUIPMENT SUCH AS:
    "VOICE MAIL, ACD, DIAL BY NAME, DOOR PHONE, ETC."
    THE FOLLOWING ARE SOME COMMON USAGES:
    9** "RAD PROGRAMMING (RAD 2, FASTRAD)"
    9*0 RAD TRANSFER (ALL BUT CICS IRAD'S)
    9*1 CHECK FEATURE CODES FOR VOICE MAIL
    9*2 SMDR Admin
    9*3 LOGGER TIME STAMP
    9*3 VMI Codes(this was on an 8x24, came up on this code rather than F9*9)
    9*4 NORSTAR DOOR PHONE PROGRAMMING
    9*5 FLASH LOW RANGE CHECK FEATURE CODES
    9*7 ACD ADMIN MAINTENANCE SESSION
    9*9 VOICE MAIL INTERFACE (VMI) CODES
    900 SMDR,enter an account number to be logged with the call
    901 ACD LOGIN
    901 VMI Admin
    902 ACD UNAVAILABLE
    903 VOICE MAIL HIGH/LOW RANGE SELECTION (DISABLED AFTER USE)
    903 ACD CANCEL WRAP
    904 ACD HELP
    904 FLASH ACD LOW RANGE LOGIN/OUT
    905 ACD CATEGORIZE
    905 FLASH LOW RANGE DN IDENTIFIER
    906 ACD RECORD CALL
    906 FLASH LOW RANGE VM TRANSFER
    907 FLASH LOW RANGE VM INTERRUPT
    908 STAR TEXT (OBSOLETE)
    908 FLASH ACD LOW RANGE BUSY MODE
    909 ACD ANN. MAINTENANCE
    909 FLASH ACD LOW RANGE QUEUE STATUS
    910 FLASH LOW RANGE LEAVE MESSAGE
    911 FLASH LOW RANGE OPEN MAILBOX
    912 FLASH LOW RANGE OPERATOR CONTROL
    913 ACD CALLS QUEUED
    913 FLASH LOW RANGE SYSTEM ADMIN LOGIN
    915 NORSTAR VOICE MAIL 2ND LEVEL ACCESS (PSWD=ACCESS2)
    920 ACD ADMIN SESSION
    921 ACD ROUTING SESSION DAY/NIGHT
    922 ACD ADMIN STATISTICS SESSION
    923 ACD GROUP STATISTICS SESSION
    960 DIAL BY NAME (CINTECH NSVM OPTION)
    961 DIAL BY NAME ADMIN (PSWD=1234)
    980 VM SEND MSG TO ANOTHER MAILBOX
    981 VM LOG INT MAILBOX
    982 VM OPERATOR STATUS(PSWD=OPERATOR(67372867))
    983 VM ADMIN PROGRAMMING (PSWD=1020000)
    983 VM SOFTWARE LEVEL(LOGIN THEN OPTION 9)
    984 VM TIME AND DATE(STARTALK Pswd=1020000)
    984 AUTO FOREWARD TO VMAIL(NSVM4.0)
    984 FLASH ACD LOGIN/OUT
    985 "VOICE MAIL DN INQUIRY(RESET VM ADMIN PSWD 9,73738767793)"
    986 VOICE MAIL TRANSFER
    987 VOICE MAIL INTERRUPT
    988 VOICE ACTIVATED NAME DIALING (NSVM 4.0)
    988 FLASH ACD BUSY MODE
    989 RECORD CALL (NSVM 4.0)
    989 FLASH ACD QUEUE STATUS

    Dec 02, 2008 | NorStar M7310 Corded Phone

    6 Answers

    Norstar T7316 can't make call forward work


    This worked for me:

    Feature 4, 0 1 (xxx) xxx-xxxx

    Mike

    Aug 06, 2008 | Nortel Norstar 16-Line PBX Speakerphone

    2 Answers

    ATT MLS-18D - Partner II, Release 3 System


    You need to program the feature "recall" on a button.

    On the phone you want to program, press Feature 00
    press a button you can program as "Recall"
    press feature 03
    when finished, press feature 00 and you are done.

    Recall is the "flash" button

    Feb 28, 2008 | Avaya Corded Phone avaparp18d

    2 Answers

    Feature Button Constantly Flashing


    1. Press the Feature key.
    2. Dial Call Forward All/DND
    set code 69.
    3. Press the Feature key
    again.

    Nov 07, 2007 | NEC Dterm DTP 16D-1 Corded Phone

    Not finding what you are looking for?
    TalkSwitch CT.TS001.124001.US Full-Featured PBX Telephone System Logo

    Related Topics:

    86 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top TalkSwitch Phones Experts

    kakima

    Level 3 Expert

    96417 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Cindy Wells

    Level 3 Expert

    4755 Answers

    Are you a TalkSwitch Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...